, Decision_act (EU) 2013/260

In forcesince 31 May 2013
(2)

The reason for the measure given by the German authorities was the non-conformity of the chainsaw with the following essential health and safety requirements set out in Annex I to Directive 2006/42/EC (with reference to the specifications of the relevant European harmonised standard EN ISO 11681-1):

1.3.2. Risk of break-up during operation:

Both rear and front handles of the chainsaw failed the strength tests set out in the relevant harmonised European standard (EN ISO 11681-1:2008 – clause 5.2.1);

1.7.4. Instructions:

The instructions did not include the business name and full address of the manufacturer (1.7.4.2 a), the EC declaration of conformity (1.7.4.2 c), a general description of the machinery (1.7.4.2 d), information on airborne noise emissions (1.7.4.2 u) and information on vibrations transmitted by the tool (2.2.1.1);

2.3 (c) Automatic brake:

The chainsaw did not stop in a sufficiently short time when the manual chain brake was activated nor under the conditions when the non-manual chain brake system shall be active (EN ISO 11681-1:2008 – clauses 5.5.1 and 5.5.2).