ANNEX I, Council Regulation (EU) No 509/2012 of 15 June 2012 amending Regulation (EU) No 36/2012…

In forcesince 17 Jun 2012
1.

This Part comprises goods, software and technology listed in Annex I to Regulation (EC) No 428/2009 [Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the control of exports, transfer, brokering and transit of dual-use items (OJ L 134, 29.5.2009, p. 1).].

2.

Unless otherwise stated, the reference numbers used in the column below entitled “No” refer to the control list number and the column below entitled “Description” refers to the control descriptions of dual-use items set out in Annex I to Regulation (EC) No 428/2009.

3.

Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.

4.

Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EC) No 428/2009.

1.

The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components is/are the principal element of the goods and can feasibly be removed or used for other purposes.

NB: In judging whether the controlled component or components is/are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.

2.

The items specified in this Annex include both new and used goods.

1.

The sale, supply, transfer or export of “technology” which is “required” for the “development”, “production” or “use” of goods the sale, supply, transfer or export of which is controlled in Sections A, B, C and D of this Part, is controlled in accordance with the provisions of Section E.

2.

The “technology”“required” for the “development”, “production” or “use” of goods under control remains under control even when it is applicable to non-controlled goods.

3.

Controls do not apply to that “technology” which is the minimum necessary for the installation, operation, maintenance (checking) and repair of those goods which are not controlled or the export of which has been authorised in accordance with this Regulation.

4.

Controls on “technology” transfer do not apply to information “in the public domain”, to “basic scientific research” or to the minimum necessary information for patent applications.

No | Description

I.

B.1A004 |

Protective and detection equipment and components, other than those specified in military goods controls, as follows:

a.

Gas masks, filter canisters and decontamination equipment therefore, designed or modified for defence against any of the following, and specially designed components therefor:

1.

Biological agents “adapted for use in war”;

2.

Radioactive materials “adapted for use in war”;

3.

Chemical warfare (CW) agents; or

4.

“Riot control agents”, including:

a.

α-Bromobenzeneacetonitrile, (Bromobenzyl cyanide) (CA) (CAS 5798-79-8);

b.

[(2-chlorophenyl) methylene] propanedinitrile, (ο-Chlorobenzylidenemalononitrile) (CS) (CAS 2698-41-1);

c.

2-Chloro-1-phenylethanone, Phenylacyl chloride (ω-chloroacetophenone) (CN) (CAS 532-27-4);

d.

Dibenz-(b,f)-1,4-oxazephine (CR) (CAS 257-07-8);

e.

10-Chloro-5,10-dihydrophenarsazine, (Phenarsazine chloride), (Adamsite), (DM) (CAS 578-94-9);

f.

N-Nonanoylmorpholine, (MPA) (CAS 5299-64-9);

b.

Protective suits, gloves and shoes, specially designed or modified for defence against any of the following:

1.

Biological agents “adapted for use in war”;

2.

Radioactive materials “adapted for use in war”; or

3.

Chemical warfare (CW) agents;

c.

Detection systems, specially designed or modified for detection or identification of any of the following, and specially designed components therefor:

1.

Biological agents “adapted for use in war”;

2.

Radioactive materials “adapted for use in war”; or

3.

Chemical warfare (CW) agents;

d.

Electronic equipment designed for automatically detecting or identifying the presence of “explosives” residues and utilising ‘trace detection’ techniques (e.g. surface acoustic wave, ion mobility spectrometry, differential mobility spectrometry, mass spectrometry).

‘Trace detection’ is defined as the capability to detect less than 1 ppm vapour, or 1 mg solid or liquid.

Note 1: 1A004.d. does not control equipment specially designed for laboratory use.

Note 2: 1A004.d. does not control non-contact walk-through security portals.

Note: 1A004 does not control:

a.

Personal radiation monitoring dosimeters;

b.

Equipment limited by design or function to protect against hazards specific to residential safety or civil industries, including:

1.

mining;

2.

quarrying;

3.

agriculture;

4.

pharmaceutical;

5.

medical;

6.

veterinary;

7.

environmental;

8.

waste management;

9.

food industry.

1A004 includes equipment and components that have been identified, successfully tested to national standards or otherwise proven effective, for the detection of or defence against radioactive materials “adapted for use in war”, biological agents “adapted for use in war”, chemical warfare agents, ‘simulants’ or “riot control agents”, even if such equipment or components are used in civil industries such as mining, quarrying, agriculture, pharmaceuticals, medical, veterinary, environmental, waste management, or the food industry.

‘Simulant’ is a substance or material that is used in place of toxic agent (chemical or biological) in training, research, testing or evaluation.

I.

B.9A012 |

“Unmanned aerial vehicles” (“UAVs”), associated systems, equipment and components, as follows:

a.

“UAVs” having any of the following:

1.

An autonomous flight control and navigation capability (e.g. an autopilot with an Inertial Navigation System); or

2.

Capability of controlled-flight out of the direct vision range involving a human operator (e.g. televisual remote control);

b.

Associated systems, equipment and components, as follows:

1.

Equipment specially designed for remotely controlling the “UAVs” specified in 9A012.a.;

2.

Systems for navigation, attitude, guidance or control, other than those specified in 7A in Annex I to Regulation (EC) No 428/2009 and specially designed to provide autonomous flight control or navigation capability to “UAVs” specified in 9A012.a.;

3.

Equipment and components, specially designed to convert a manned “aircraft” to a “UAV” specified in 9A012.a.;

4.

Air breathing reciprocating or rotary internal combustion type engines, specially designed or modified to propel “UAVs” at altitudes above 50000 feet (15240 metres).

I.

B.9A350 |

Spraying or fogging systems, specially designed or modified for fitting to aircraft, “lighter-than-air vehicles” or unmanned aerial vehicles, and specially designed components therefor, as follows:

Complete spraying or fogging systems capable of delivering, from a liquid suspension, an initial droplet ‘VMD’ of less than 50 μm at a flow rate of greater than two litres per minute;

Spray booms or arrays of aerosol generating units capable of delivering, from a liquid suspension, an initial droplet ‘VMD’ of less than 50 μm at a flow rate of greater than two litres per minute;

Aerosol generating units specially designed for fitting to systems specified in 9A350.a. and b.

Note: Aerosol generating units are devices specially designed or modified for fitting to aircraft such as nozzles, rotary drum atomisers and similar devices.

Note: 9A350 does not control spraying or fogging systems and components that are demonstrated not to be capable of delivering biological agents in the form of infectious aerosols.

1.

Droplet size for spray equipment or nozzles specially designed for use on aircraft, “lighter-than-air vehicles” or unmanned aerial vehicles should be measured using either of the following:

a.

Doppler laser method;

b.

Forward laser diffraction method.

2.

In 9A350 ‘VMD’ means Volume Median Diameter and for water-based systems this equates to Mass Median Diameter (MMD).

No | Description

I.

B.2B350 |

Chemical manufacturing facilities, equipment and components, as follows:

a.

Reaction vessels or reactors, with or without agitators, with total internal (geometric) volume greater than 0,1 m3 (100 litres) and less than 20 m3 (20000 litres), where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coating or glass lining);

4.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

5.

Tantalum or tantalum ‘alloys’;

6.

Titanium or titanium ‘alloys’;

7.

Zirconium or zirconium ‘alloys’; or

8.

Niobium (columbium) or niobium ‘alloys’;

b.

Agitators for use in reaction vessels or reactors specified in 2B350.a.; and impellers, blades or shafts designed for such agitators, where all surfaces of the agitator that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

5.

Tantalum or tantalum ‘alloys’;

6.

Titanium or titanium ‘alloys’;

7.

Zirconium or zirconium ‘alloys’; or

8.

Niobium (columbium) or niobium ‘alloys’;

c.

Storage tanks, containers or receivers with a total internal (geometric) volume greater than 0,1 m3 (100 litres) where all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

5.

Tantalum or tantalum ‘alloys’;

6.

Titanium or titanium ‘alloys’;

7.

Zirconium or zirconium ‘alloys’; or

8.

Niobium (columbium) or niobium ‘alloys’;

d.

Heat exchangers or condensers with a heat transfer surface area greater than 0,15 m2, and less than 20 m2; and tubes, plates, coils or blocks (cores) designed for such heat exchangers or condensers, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Graphite or ‘carbon graphite’;

5.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

6.

Tantalum or tantalum ‘alloys’;

7.

Titanium or titanium ‘alloys’;

8.

Zirconium or zirconium ‘alloys’;

9.

Silicon carbide;

10.

Titanium carbide; or

11.

Niobium (columbium) or niobium ‘alloys’;

e.

Distillation or absorption columns of internal diameter greater than 0,1 m; and liquid distributors, vapour distributors or liquid collectors designed for such distillation or absorption columns, where all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Graphite or ‘carbon graphite’;

5.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

6.

Tantalum or tantalum ‘alloys’;

7.

Titanium or titanium ‘alloys’;

8.

Zirconium or zirconium ‘alloys’; or

9.

Niobium (columbium) or niobium ‘alloys’;

f.

Remotely operated filling equipment in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight; or

2.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

g.

Valves with ‘nominal sizes’ greater than 10 mm and casings (valve bodies) or preformed casing liners designed for such valves, in which all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

5.

Tantalum or tantalum ‘alloys’;

6.

Titanium or titanium ‘alloys’;

7.

Zirconium or zirconium ‘alloys’;

8.

Niobium (columbium) or niobium ‘alloys’; or

9.

Ceramic materials as follows:

a.

Silicon carbide with purity of 80 % or more by weight;

b.

Aluminium oxide (alumina) with purity of 99,9 % or more by weight;

c.

Zirconium oxide (zirconia);

The ‘nominal size’ is defined as the smaller of the inlet and outlet diameters.

h.

Multi-walled piping incorporating a leak detection port, in which all surfaces that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

3.

Glass (including vitrified or enamelled coatings or glass lining);

4.

Graphite or ‘carbon graphite’;

5.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

6.

Tantalum or tantalum ‘alloys’;

7.

Titanium or titanium ‘alloys’;

8.

Zirconium or zirconium ‘alloys’; or

9.

Niobium (columbium) or niobium ‘alloys’;

i.

Multiple-seal and seal-less pumps, with manufacturer’s specified maximum flow-rate greater than 0,6 m3/hour, or vacuum pumps with manufacturer’s specified maximum flow-rate greater than 5 m3/hour (under standard temperature (273 K (0 °C)) and pressure (101,3 kPa) conditions); and casings (pump bodies), preformed casing liners, impellers, rotors or jet pump nozzles designed for such pumps, in which all surfaces that come in direct contact with the chemical(s) being processed are made from any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Ceramics;

3.

Ferrosilicon (high silicon iron alloys);

4.

Fluoropolymers (polymeric or elastomeric materials with more than 35 % fluorine by weight);

5.

Glass (including vitrified or enamelled coatings or glass lining);

6.

Graphite or ‘carbon graphite’;

7.

Nickel or ‘alloys’ with more than 40 % nickel by weight;

8.

Tantalum or tantalum ‘alloys’;

9.

Titanium or titanium ‘alloys’;

10.

Zirconium or zirconium ‘alloys’; or

11.

Niobium (columbium) or niobium ‘alloys’;

j.

Incinerators designed to destroy chemicals specified in entry 1C350, having specially designed waste supply systems, special handling facilities and an average combustion chamber temperature greater than 1273 K (1000 °C), in which all surfaces in the waste supply system that come into direct contact with the waste products are made from or lined with any of the following materials:

1.

‘Alloys’ with more than 25 % nickel and 20 % chromium by weight;

2.

Ceramics; or

3.

Nickel or ‘alloys’ with more than 40 % nickel by weight.

1.

‘Carbon graphite’ is a composition consisting of amorphous carbon and graphite, in which the graphite content is eight percent or more by weight.

2.

For the listed materials in the above entries, the term ‘alloy’ when not accompanied by a specific elemental concentration is understood as identifying those alloys where the identified metal is present in a higher percentage by weight than any other element.

I.

B.2B351 |

Toxic gas monitoring systems and their dedicated detecting components, other than those specified in 1A004, as follows; and detectors; sensor devices; and replaceable sensor cartridges therefor:

a.

Designed for continuous operation and usable for the detection of chemical warfare agents or chemicals specified in 1C350, at concentrations of less than 0,3 mg/m3; or

b.

Designed for the detection of cholinesterase-inhibiting activity.

I.

B.2B352 |

Equipment capable of use in handling biological materials, as follows:

a.

Complete biological containment facilities at P3, P4 containment level;

P3 or P4 (BL3, BL4, L3, L4) containment levels are as specified in the WHO Laboratory Biosafety manual (3rd edition Geneva 2004).

b.

Fermenters capable of cultivation of pathogenic “micro-organisms”, viruses or capable of toxin production, without the propagation of aerosols, and having a total capacity of 20 litres or more;

Fermenters include bioreactors, chemostats and continuous-flow systems.

c.

Centrifugal separators, capable of continuous separation without the propagation of aerosols, having all the following characteristics:

1.

Flow rate exceeding 100 litres per hour;

2.

Components of polished stainless steel or titanium;

3.

One or more sealing joints within the steam containment area; and

4.

Capable of in-situ steam sterilisation in a closed state;

Centrifugal separators include decanters.

d.

Cross (tangential) flow filtration equipment and components as follows:

1.

Cross (tangential) flow filtration equipment capable of separation of pathogenic “micro-organisms”, viruses, toxins or cell cultures, without the propagation of aerosols, having all of the following characteristics:

a.

A total filtration area equal to or greater than 1 m2; and

b.

Having either of the following characteristics:

1.

Capable of being sterilised or disinfected in-situ; or

2.

Using disposable or single-use filtration components;

In 2B352.d.1.b. sterilised denotes the elimination of all viable microbes from the equipment through the use of either physical (e.g. steam) or chemical agents. Disinfected denotes the destruction of potential microbial infectivity in the equipment through the use of chemical agents with a germicidal effect. Disinfection and sterilisation are distinct from sanitisation, the latter referring to cleaning procedures designed to lower the microbial content of equipment without necessarily achieving elimination of all microbial infectivity or viability.

2.

Cross (tangential) flow filtration components (e.g. modules, elements, cassettes, cartridges, units or plates) with filtration area equal to or greater than 0,2 m2 for each component and designed for use in cross (tangential) flow filtration equipment specified in 2B352.d.;

Note: 2B352.d. does not control reverse osmosis equipment, as specified by the manufacturer.

e.

Steam sterilisable freeze drying equipment with a condenser capacity exceeding 10 kg of ice in 24 hours and less than 1000 kg of ice in 24 hours;

f.

Protective and containment equipment, as follows:

1.

Protective full or half suits, or hoods dependent upon a tethered external air supply and operating under positive pressure;

Note: 2B352.f.1. does not control suits designed to be worn with self-contained breathing apparatus.

2.

Class III biological safety cabinets or isolators with similar performance standards;

Note: In 2B352.f.2., isolators include flexible isolators, dry boxes, anaerobic chambers, glove boxes and laminar flow hoods (closed with vertical flow).

g.

Chambers designed for aerosol challenge testing with “micro-organisms”, viruses or “toxins” and having a capacity of 1 m3 or greater.

[Council Directive 2005/94/EC of 20 December 2005 on Community measures for the control of avian influenza (OJ L 10, 14.1.2006, p. 16).]

No | Description

I.

B.1C350 |

Chemicals, which may be used as precursors for toxic chemical agents, as follows, and “chemical mixtures” containing one or more thereof:

NB: SEE ALSO MILITARY GOODS CONTROLS AND 1C450.

1.

Thiodiglycol (111-48-8);

2.

Phosphorus oxychloride (10025-87-3);

3.

Dimethyl methylphosphonate (756-79-6);

4.

SEE MILITARY GOODS CONTROLS FOR

Methyl phosphonyl difluoride (676-99-3);

5.

Methyl phosphonyl dichloride (676-97-1);

6.

Dimethyl phosphite (DMP) (868-85-9);

7.

Phosphorus trichloride (7719-12-2);

8.

Trimethyl phosphite (TMP) (121-45-9);

9.

Thionyl chloride (7719-09-7);

10.

3-Hydroxy-1-methylpiperidine (3554-74-3);

11.

N,N-Diisopropyl-(beta)-aminoethyl chloride (96-79-7);

12.

N,N-Diisopropyl-(beta)-aminoethane thiol (5842-07-9);

13.

3-Quinuclidinol (1619-34-7);

14.

Potassium fluoride (7789-23-3);

15.

2-Chloroethanol (107-07-3);

16.

Dimethylamine (124-40-3);

17.

Diethyl ethylphosphonate (78-38-6);

18.

Diethyl-N,N-dimethylphosphoramidate (2404-03-7);

19.

Diethyl phosphite (762-04-9);

20.

Dimethylamine hydrochloride (506-59-2);

21.

Ethyl phosphinyl dichloride (1498-40-4);

22.

Ethyl phosphonyl dichloride (1066-50-8);

23.

SEE MILITARY GOODS CONTROLS FOR

Ethyl phosphonyl difluoride (753-98-0);

24.

Hydrogen fluoride (7664-39-3);

25.

Methyl benzilate (76-89-1);

26.

Methyl phosphinyl dichloride (676-83-5);

27.

N,N-Diisopropyl-(beta)-amino ethanol (96-80-0);

28.

Pinacolyl alcohol (464-07-3);

29.

SEE MILITARY GOODS CONTROLS FOR

O-Ethyl-2-diisopropylaminoethyl methyl phosphonite (QL) (57856-11-8);

30.

Triethyl phosphite (122-52-1);

31.

Arsenic trichloride (7784-34-1);

32.

Benzilic acid (76-93-7);

33.

Diethyl methylphosphonite (15715-41-0);

34.

Dimethyl ethylphosphonate (6163-75-3);

35.

Ethyl phosphinyl difluoride (430-78-4);

36.

Methyl phosphinyl difluoride (753-59-3);

37.

3-Quinuclidone (3731-38-2);

38.

Phosphorus pentachloride (10026-13-8);

39.

Pinacolone (75-97-8);

40.

Potassium cyanide (151-50-8);

41.

Potassium bifluoride (7789-29-9);

42.

Ammonium hydrogen fluoride or ammonium bifluoride (1341-49-7);

43.

Sodium fluoride (7681-49-4);

44.

Sodium bifluoride (1333-83-1);

45.

Sodium cyanide (143-33-9);

46.

Triethanolamine (102-71-6);

47.

Phosphorus pentasulphide (1314-80-3);

48.

Di-isopropylamine (108-18-9);

49.

Diethylaminoethanol (100-37-8);

50.

Sodium sulphide (1313-82-2);

51.

Sulphur monochloride (10025-67-9);

52.

Sulphur dichloride (10545-99-0);

53.

Triethanolamine hydrochloride (637-39-8);

54.

N,N-Diisopropyl-(Beta)-aminoethyl chloride hydrochloride (4261-68-1);

55.

Methylphosphonic acid (993-13-5);

56.

Diethyl methylphosphonate (683-08-9);

57.

N,N-Dimethylaminophosphoryl dichloride (677-43-0);

58.

Triisopropyl phosphite (116-17-6);

59.

Ethyldiethanolamine (139-87-7);

60.

O,O-Diethyl phosphorothioate (2465-65-8);

61.

O,O-Diethyl phosphorodithioate (298-06-6);

62.

Sodium hexafluorosilicate (16893-85-9);

63.

Methylphosphonothioic dichloride (676-98-2).

This article is long: the rest is at the official publication.