1 ANNEX, Decision_act (EU) 2012/135

In forcesince 28 Feb 2012

These BAT conclusions concern the following activities specified in Annex I to Directive 2010/75/EU, namely:

—activity 1.3coke production

—activity 2.1metal ore (including sulphide ore) roasting and sintering

—activity 2.2production of pig iron or steel (primary or secondary fusion) including continuous casting, with a capacity exceeding 2,5 tonnes per hour.

In particular, the BAT conclusions cover the following processes:

the loading, unloading and handling of bulk raw materials

the blending and mixing of raw materials

the sintering and pelletisation of iron ore

the production of coke from coking coal

the production of hot metal by the blast furnace route, including slag processing

the production and refining of steel using the basic oxygen process, including upstream ladle desulphurisation, downstream ladle metallurgy and slag processing

the production of steel by electric arc furnaces, including downstream ladle metallurgy and slag processing

continuous casting (thin slab/thin strip and direct sheet casting (near-shape))

These BAT conclusions do not address the following activities:

production of lime in kilns, covered by the Cement, Lime and Magnesium Oxide Manufacturing Industries BREF (CLM)

the treatment of dusts to recover non-ferrous metals (e.g. electric arc furnace dust) and the production of ferroalloys, covered by the Non-Ferrous Metals Industries BREF (NFM)

sulphuric acid plants in coke ovens, covered by the Large Volume Inorganic Chemicals-Ammonia, Acids and Fertilisers Industries (LVIC-AAF BREF).

Other reference documents which are of relevance for the activities covered by these BAT conclusions are the following:

Reference documents | Activity

Large Combustion Plants BREF (LCP) | Combustion plants with a rated thermal input of 50 MW or more

Ferrous Metals Processing Industry BREF (FMP) | Downstream processes like rolling, pickling, coating, etc.

Continuous casting to the thin slab/thin strip and direct sheet casting (near-shape)

Emissions from Storage BREF (EFS) | Storage and handling

Industrial Cooling Systems BREF (ICS) | Cooling systems

General Principles of Monitoring (MON) | Emissions and consumptions monitoring

Energy Efficiency BREF (ENE) | General energy efficiency

Economic and Cross-Media Effects (ECM) | Economic and cross-media effects of techniques

The techniques listed and described in these BAT conclusions are neither prescriptive nor exhaustive. Other techniques may be used that ensure at least an equivalent level of environmental protection.

The environmental performance levels associated with BAT are expressed as ranges, rather than as single values. A range may reflect the differences within a given type of installation (e.g. differences in the grade/purity and quality of the final product, differences in design, construction, size and capacity of the installation) that result in variations in the environmental performances achieved when applying BAT

In these BAT conclusions, BAT-AELs for air emissions are expressed as either:

mass of emitted substances per volume of waste gas under standard conditions (273,15 K, 101,3 kPa), after deduction of water vapour content, expressed in the units g/Nm3, mg/Nm3, μg/Nm3 or ng/Nm3; or

mass of emitted substances per unit of mass of products generated or processed (consumption or emission factors), expressed in the units kg/t, g/t, mg/t or μg/t.

and BAT-AELs for emissions to water are expressed as:

mass of emitted substances per volume of waste water, expressed in the units g/l, mg/l or μg/l.

For the purposes of these BAT conclusions:

—‘new plant’ meansa plant introduced on the site of the installation following the publication of these BAT conclusions or a complete replacement of a plant on the existing foundations of the installation following the publication of these BAT conclusions

—‘existing plant’ meansa plant which is not a new plant

—‘NOX’ meansthe sum of nitrogen oxide (NO) and nitrogen dioxide (NO2) expressed as NO2

—‘SOX’ meansthe sum of sulphur dioxide (SO2) and sulphur trioxide (SO3) expressed as SO2

—‘HCl’ meansall gaseous chlorides expressed as HCl

—‘HF’ meansall gaseous fluorides expressed as HF

Unless otherwise stated, the BAT conclusions presented in this section are generally applicable.

The process specific BAT included in the Sections 1.2 – 1.7 apply in addition to the general BAT mentioned in this Section.

1.

BAT is to implement and adhere to an environmental management system (EMS) that incorporates all of the following features:

I.

commitment of management, including senior management;

II.

definition of an environmental policy that includes continuous improvement for the installation by the management;

III.

planning and establishing the necessary procedures, objectives and targets, in conjunction with financial planning and investment;

IV.

implementation of the procedures paying particular attention to:

(i)

structure and responsibility

(ii)

training, awareness and competence

(iii)

communication

(iv)

employee involvement

(v)

documentation

(vi)

efficient process control

(vii)

maintenance programmes

(viii)

emergency preparedness and response

(ix)

safeguarding compliance with environmental legislation;

V.

checking performance and taking corrective action, paying particular attention to:

(i)

monitoring and measurement (see also the Reference Document on the General Principles of Monitoring)

(ii)

corrective and preventive action

(iii)

maintenance of records

(iv)

independent (where practicable) internal and external auditing in order to determine whether or not the EMS conforms to planned arrangements and has been properly implemented and maintained;

VI.

review of the EMS and its continuing suitability, adequacy and effectiveness by senior management;

VII.

following the development of cleaner technologies;

VIII.

consideration for the environmental impacts from the eventual decommissioning of the installation at the stage of designing a new plant, and throughout its operating life;

IX.

application of sectoral benchmarking on a regular basis.

The scope (e.g. level of details) and nature of the EMS (e.g. standardised or non-standardised) will generally be related to the nature, scale and complexity of the installation, and the range of environmental impacts it may have.

2.

BAT is to reduce thermal energy consumption by using a combination of the following techniques:

I.

improved and optimised systems to achieve smooth and stable processing, operating close to the process parameter set points by using

(i)

process control optimisation including computer-based automatic control systems

(ii)

modern, gravimetric solid fuel feed systems

(iii)

preheating, to the greatest extent possible, considering the existing process configuration.

II.

recovering excess heat from processes, especially from their cooling zones

III.

an optimised steam and heat management

IV.

applying process integrated reuse of sensible heat as much as possible.

In the context of energy management, see the Energy Efficiency BREF (ENE).

The following items are important for integrated steelworks in order to improve the overall energy efficiency:

optimising energy consumption

online monitoring for the most important energy flows and combustion processes at the site including the monitoring of all gas flares in order to prevent energy losses, enabling instant maintenance and achieving an undisrupted production process

reporting and analysing tools to check the average energy consumption of each process

defining specific energy consumption levels for relevant processes and comparing them on a long-term basis

carrying out energy audits as defined in the Energy Efficiency BREF, e.g. to identify cost-effective energy savings opportunities.

Process integrated techniques used to improve energy efficiency in steel manufacturing by improved heat recovery include:

combined heat and power production with recovery of waste heat by heat exchangers and distribution either to other parts of the steelworks or to a district heating network

the installation of steam boilers or adequate systems in large reheating furnaces (furnaces can cover a part of the steam demand)

preheating of the combustion air in furnaces and other burning systems to save fuel, taking into consideration adverse effects, i.e. an increase of nitrogen oxides in the off-gas

the insulation of steam pipes and hot water pipes

recovery of heat from products, e.g. sinter

where steel needs to be cooled, the use of both heat pumps and solar panels

the use of flue-gas boilers in furnaces with high temperatures

the oxygen evaporation and compressor cooling to exchange energy across standard heat exchangers

the use of top recovery turbines to convert the kinetic energy of the gas produced in the blast furnace into electric power.

Combined heat and power generation is applicable for all iron and steel plants close to urban areas with a suitable heat demand. The specific energy consumption depends on the scope of the process, the product quality and the type of installation (e.g. the amount of vacuum treatment at the basic oxygen furnace (BOF), annealing temperature, thickness of products, etc.).

3.

BAT is to reduce primary energy consumption by optimisation of energy flows and optimised utilisation of the extracted process gases such as coke oven gas, blast furnace gas and basic oxygen gas.

Process integrated techniques to improve energy efficiency in an integrated steelworks by optimising process gas utilisation include:

the use of gas holders for all by-product gases or other adequate systems for short-term storage and pressure holding facilities

increasing pressure in the gas grid if there are energy losses in the flares – in order to utilise more process gases with the resulting increase in the utilisation rate

gas enrichment with process gases and different calorific values for different consumers

heating fire furnaces with process gas

use of a computer-controlled calorific value control system

recording and using coke and flue-gas temperatures

adequate dimensioning of the capacity of the energy recovery installations for the process gases, in particular with regard to the variability of process gases.

The specific energy consumption depends on the scope of the process, the product quality and the type of installation (e.g. the amount of vacuum treatment at the BOF, annealing temperature, thickness of products, etc.).

4.

BAT is to use desulphurised and dedusted surplus coke oven gas and dedusted blast furnace gas and basic oxygen gas (mixed or separate) in boilers or in combined heat and power plants to generate steam, electricity and/or heat using surplus waste heat for internal or external heating networks, if there is a demand from a third party.

The cooperation and agreement of a third party may not be within the control of the operator, and therefore may not be within the scope of the permit.

5.

BAT is to minimise electrical energy consumption by using one or a combination of the following techniques:

I.

power management systems

II.

grinding, pumping, ventilation and conveying equipment and other electricity-based equipment with high energy efficiency.

Frequency controlled pumps cannot be used where the reliability of the pumps is of essential importance for the safety of the process.

6.

BAT is to optimise the management and control of internal material flows in order to prevent pollution, prevent deterioration, provide adequate input quality, allow reuse and recycling and to improve the process efficiency and optimisation of the metal yield.

Appropriate storage and handling of input materials and production residues can help to minimise the airborne dust emissions from stockyards and conveyor belts, including transfer points, and to avoid soil, groundwater and runoff water pollution (see also BAT 11).

The application of an adequate management of integrated steelworks and residues, including wastes, from other installations and sectors allows for a maximised internal and/or external use as raw materials (see also BAT 8, 9 and 10).

Material management includes the controlled disposal of small parts of the overall quantity of residues from an integrated steelworks which have no economic use.

7.

In order to achieve low emission levels for relevant pollutants, BAT is to select appropriate scrap qualities and other raw materials. Regarding scrap, BAT is to undertake an appropriate inspection for visible contaminants which might contain heavy metals, in particular mercury, or might lead to the formation of polychlorinated dibenzodioxins/furans (PCDD/F) and polychlorinated biphenyls (PCB).

To improve the use of scrap, the following techniques can be used individually or in combination:

specification of acceptance criteria suited to the production profile in purchase orders of scrap

having a good knowledge of scrap composition by closely monitoring the origin of the scrap; in exceptional cases, a melt test might help characterise the composition of the scrap

having adequate reception facilities and check deliveries

having procedures to exclude scrap that is not suitable for use in the installation

storing the scrap according to different criteria (e.g. size, alloys, degree of cleanliness); storing of scrap with potential release of contaminants to the soil on impermeable surfaces with a drainage and collection system; using a roof which can reduce the need for such a system

putting together the scrap load for the different melts taking into account the knowledge of composition in order to use the most suitable scrap for the steel grade to be produced (this is essential in some cases to avoid the presence of undesired elements and in other cases to take advantage of alloy elements which are present in the scrap and needed for the steel grade to be produced)

prompt return of all internally-generated scrap to the scrapyard for recycling

having an operation and management plan

scrap sorting to minimise the risk of including hazardous or non-ferrous contaminants, particularly polychlorinated biphenyls (PCB) and oil or grease. This is normally done by the scrap supplier but the operator inspects all scrap loads in sealed containers for safety reasons. Therefore, at the same time, it is possible to check, as far as practicable, for contaminants. Evaluation of the small quantities of plastic (e.g. as plastic coated components) may be required

radioactivity control according to the United Nations Economic Commission for Europe (UNECE) Expert Group framework of recommendations

implementation of the mandatory removal of components which contain mercury from End-of-Life Vehicles and Waste Electrical and Electronic Equipment (WEEE) by the scrap processors can be improved by:

fixing the absence of mercury in scrap purchase contracts

refusal of scrap which contains visible electronic components and assemblies.

The selection and sorting of scrap might not be entirely within the control of the operator.

8.

BAT for solid residues is to use integrated techniques and operational techniques for waste minimisation by internal use or by application of specialised recycling processes (internally or externally).

Techniques for the recycling of iron-rich residues include specialised recycling techniques such as the OxyCup® shaft furnace, the DK process, smelting reduction processes or cold bonded pelletting/briquetting as well as techniques for production residues mentioned in Sections 9.2 – 9.7.

As the mentioned processes may be carried out by a third party, the recycling itself may not be within the control of the operator of the iron and steel plant, and therefore may not be within the scope of the permit.

9.

BAT is to maximise external use or recycling for solid residues which cannot be used or recycled according to BAT 8, wherever this is possible and in line with waste regulations. BAT is to manage in a controlled manner residues which can neither be avoided nor recycled.

10.

BAT is to use the best operational and maintenance practices for the collection, handling, storage and transport of all solid residues and for the hooding of transfer points to avoid emissions to air and water.

11.

BAT is to prevent or reduce diffuse dust emissions from materials storage, handling and transport by using one or a combination of the techniques mentioned below.

If abatement techniques are used, BAT is to optimise the capture efficiency and subsequent cleaning through appropriate techniques such as those mentioned below. Preference is given to the collection of the dust emissions nearest to the source.

I.

General techniques include:

the setting up within the EMS of the steelworks of an associated diffuse dust action plan;

consideration of temporary cessation of certain operations where they are identified as a source of PM10 causing a high ambient reading; in order to do this, it will be necessary to have sufficient PM10 monitors, with associated wind direction and strength monitoring, to be able to triangulate and identify key sources of fine dust.

II.

Techniques for the prevention of dust releases during the handling and transport of bulk raw materials include:

orientation of long stockpiles in the direction of the prevailing wind

installing wind barriers or using natural terrain to provide shelter

controlling the moisture content of the material delivered

careful attention to procedures to avoid the unnecessary handling of materials and long unenclosed drops

adequate containment on conveyors and in hoppers, etc.

the use of dust-suppressing water sprays, with additives such as latex, where appropriate

rigorous maintenance standards for equipment

high standards of housekeeping, in particular the cleaning and damping of roads

the use of mobile and stationary vacuum cleaning equipment

dust suppression or dust extraction and the use of a bag filter cleaning plant to abate sources of significant dust generation

the application of emissions-reduced sweeping cars for carrying out the routine cleaning of hard surfaced roads.

III.

Techniques for materials delivery, storage and reclamation activities include:

total enclosure of unloading hoppers in a building equipped with filtered air extraction for dusty materials, or hoppers should be fitted with dust baffles and the unloading grids coupled to a dust extraction and cleaning system

limiting the drop heights if possible to a maximum of 0,5 m

the use of water sprays (preferably using recycled water) for dust suppression

where necessary, the fitting of storage bins with filter units to control dust

the use of totally enclosed devices for reclamation from bins

where necessary, the storage of scrap in covered, and hard surfaced areas to reduce the risk of ground contamination (using just in time delivery to minimise the size of the yard and hence emissions)

minimisation of the disturbance of stockpiles

restriction of the height and a controlling of the general shape of stockpiles

the use of in-building or in-vessel storage, rather than external stockpiles, if the scale of storage is appropriate

the creation of windbreaks by natural terrain, banks of earth or the planting of long grass and evergreen trees in open areas to capture and absorb dust without suffering long-term harm

hydro-seeding of waste tips and slag heaps

implementation of a greening of the site by covering unused areas with top soil and planting grass, shrubs and other ground covering vegetation

the moistening of the surface using durable dust-binding substances

the covering of the surface with tarpaulins or coating (e.g. latex) stockpiles

the application of storage with retaining walls to reduce the exposed surface

when necessary, a measure could be to include impermeable surfaces with concrete and drainage.

IV.

Where fuel and raw materials are delivered by sea and dust releases could be significant, some techniques include:

use by operators of self-discharge vessels or enclosed continuous unloaders. Otherwise, dust generated by grab-type ship unloaders should be minimised through a combination of ensuring adequate moisture content of the material is delivered, by minimising drop heights and by using water sprays or fine water fogs at the mouth of the ship unloader hopper

avoiding seawater in spraying ores or fluxes as this results in a fouling of sinter plant electrostatic precipitators with sodium chloride. Additional chlorine input in the raw materials may also lead to rising emissions (e.g. of polychlorinated dibenzodioxins/furans (PCDD/F)) and hamper filter dust recirculation

storage of powdered carbon, lime and calcium carbide in sealed silos and conveying them pneumatically or storing and transferring them in sealed bags.

V.

Train or truck unloading techniques include:

if necessary due to dust emission formation, use of dedicated unloading equipment with a generally enclosed design.

VI.

For highly drift-sensitive materials which may lead to significant dust release, some techniques include:

use of transfer points, vibrating screens, crushers, hoppers and the like, which may be totally enclosed and extracted to a bag filter plant

use of central or local vacuum cleaning systems rather than washing down for the removal of spillage, since the effects are restricted to one medium and the recycling of spilt material is simplified.

VII.

Techniques for the handling and processing of slag include:

keeping stockpiles of slag granulate damp for slag handling and processing since dried blast furnace slag and steel slag can give rise to dust

use of enclosed slag-crushing equipment fitted with efficient extraction and bag filters to reduce dust emissions.

VIII.

Techniques for handling scrap include:

providing scrap storage under cover and/or on concrete floors to minimise dust lift-off caused by vehicle movements

IX.

Techniques to consider during material transport include:

the minimisation of points of access from public highways

the employment of wheel-cleaning equipment to prevent the carryover of mud and dust onto public roads

the application of hard surfaces to the transport roads (concrete or asphalt) to minimise the generation of dust clouds during materials transport and the cleaning of roads

the restriction of vehicles to designated routes by fences, ditches or banks of recycled slag

the damping of dusty routes by water sprays, e.g. at slag-handling operations

ensuring that transport vehicles are not overfull, so as to prevent any spillage

ensuring that transport vehicles are sheeted to cover the material carried

the minimisation of numbers of transfers

use of closed or enclosed conveyors

use of tubular conveyors, where possible, to minimise material losses by changes of direction across sites usually provided by the discharge of materials from one belt onto another

good practice techniques for molten metal transfer and ladle handling

dedusting of conveyor transfer points.

12.

This article is long: the rest is at the official publication.