Based on the risk assessment the authorisation should if necessary set out specific migration limits to ensure the safety of the final material or article. If an additive that is authorised for the manufacture of plastic materials and articles is at the same time authorised as food additive or flavouring substance it should be ensured that the release of the substance does not change the composition of the food in an unacceptable way. Therefore the release of such a dual use additive or flavouring should not exhibit a technological function on the food unless such a function is intended and the food contact material complies with the requirements on active food contact materials set out in Regulation (EC) No 1935/2004 and Commission Regulation (EC) No 450/2009 of 29 May 2009 on active and intelligent materials and articles intended to come into contact with food [OJ L 135, 30.5.2009, p. 3.]. The requirements of Regulations (EC) No 1333/2008 of the European Parliament and of the Council of 16 December 2008 on food additives [OJ L 354, 31.12.2008, p. 16.] or (EC) No 1334/2008 of the European Parliament and of the Council of 16 December 2008 on flavourings and certain food ingredients with flavouring properties for use in and on foods and amending Council Regulation (EEC) No 1601/91, Regulations (EC) No 2232/96 and (EC) No 110/2008 and Directive 2000/13/EC [OJ L 354, 31.12.2008, p. 34.] should be respected where applicable.
Recital 24, Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articl…
In forcesince 14 Jan 2011
Regulation (EC) No 1935/2004 of the European Parliament and of the Council of 27 October…Law
Regulation (EC) No 1333/2008 of the European Parliament and of the Council of 16 Decembe…Law
Regulation (EC) No 1334/2008 of the European Parliament and of the Council of 16 Decembe…Law
Commission Regulation (EC) No 450/2009 of 29 May 2009 on active and intelligent material…Law
- celex=31991R1601
- celex=31996R2232
- celex=32000L0013
- celex=32008R0110