Art. 3a Commission Regulation (EU) No 10/2011 of 14 January 2011 on plastic materials and articl…

High degree of purity

In forcesince 16 Mar 2025cited 1×

A substance used in the manufacture of plastic materials and articles shall be considered as having a high degree of purity where all of its constituents correspond to its identity, and it otherwise contains only a minor amount of non-intentionally added substances that individually fulfil one of the following conditions:

(i)

they comply with the specifications or restrictions specified in the authorisation of the substance in Table 1 of Annex I, if any;

(ii)

they have been subject to a risk assessment in accordance with Article 19 and considered compliant;

(iii)

they have been subject to a toxicological assessment in accordance with the relevant guidance adopted by the Authority, which concludes that genotoxicity is ruled out, and that, on the basis of documented analysis concerning their foreseeable use, characteristics and fate during subsequent manufacturing stages, it can be reasonably assumed that none of the substances will be present in the final plastic material or article at a level that could give rise to a migration such as to their individual presence in food exceeding 0,05 mg/kg;

(iv)

they have not been subject to an assessment specified in points (ii) or (iii), but to a risk assessment which concludes, on the basis of documented analysis concerning their foreseeable use, characteristics and fate during subsequent manufacturing stages, that it can be reasonably assumed that they cannot be present in the final plastic material or article at a level that could give rise to a migration into food such as to their individual presence in food exceeding 0,00015 mg/kg.

For the purpose of point (iii), the individual assessment of genotoxicity may be substituted with a group assessment of genotoxicity, if the assessed substances are chemically related and belong to the same or similar functional groups that could give rise to toxicity, or if the substances are obtained as a mixture representative for migration into food and this mixture is assessed through appropriate methods.