Recital 2, Decision_act (EU) 2011/149

In forcesince 7 Mar 2011

The Commission has been assisted by Eurocontrol as foreseen in Article 18b of Directive 2003/87/EC. The best available data for calculation of the historic emissions was considered to be the comprehensive air traffic data contained in Eurocontrol’s databases from the Central Route Charges Office (CRCO) and the Central Flow Management Unit (CFMU). These provide among other things a calculation of the actual route length for each individual flight. Emissions were then calculated on a flight-by-flight basis using the ANCAT 3 (Abatement of Nuisances Caused by Air Transport) methodology and the CASE (Calculation of Emissions by Selective Equivalence) methodology. This approach to calculating historic emissions was further enhanced through use of actual fuel consumption information provided voluntarily by a representative number of aircraft operators which helped to improve the accuracy of the modelling approach. Additional calculations were carried out to account for fuel consumption associated with the use of the auxiliary power units (APUs). The approach taken was first to determine the average APU fuel consumption for different aircraft types. The individual emission factors of APU fuel consumption were then extrapolated to calculate total APU emissions applying a process which took into account the actual share of fuel burn for the flights under the EU ETS of each aircraft type and the use of ground power in airports. The emissions corresponding to the resulting total APU fuel consumption were included in the historical aviation emissions for each of the years 2004, 2005 and 2006.