Where expressly provided, the regulations of this Annex are applicable to new and existing passenger ships of class A, B, C and D, engaged on domestic voyages, having regard to the scope of this Directive as provided in Article 3.
New class B, C and D ships having a length of less than 24 metres have to comply with the requirements of Regulations II-1/B/2 to II-1/B/8 and II-1/B/10 of this Annex, unless the Administration of a flag State, whose flag such ships are entitled to fly, ensures that they comply with the flag State’s national rules and that such rules guarantee an equivalent level of safety.
Where regulations of this Annex do not apply to new ships of less than 24 metres in length, the Administration of the flag State shall ensure that an equivalent safety level for such ships is provided through compliance with national rules.
Existing class C and D ships do not have to comply with the regulations of Chapters II-1 and II-2 of this Annex, provided that the Administration of a flag State, which flag such ships are entitled to fly, ensures that they comply with the flag State’s national rules and that such rules guarantee an equivalent level of safety.
In addition, if it is found impracticable and/or unreasonable, class B, C and D ships of less than 24 metres in length do not have to comply with the following regulations in Chapter II-1: In Part B, Regulation 10, in Part C, Regulations 4, 9 and 10 and in Part E, Regulations 1 to 9. The Administration of the flag State shall ensure that an equivalent safety level for such ships is provided through compliance with national rules.
Regardless of what is provided in Article 6.1(b), Class D ships not extending their voyage outside of Sea Area A 1, as defined in Regulation IV/2.12 of the 1974 SOLAS Convention, do not have to comply with the carriage requirements in Chapter IV of the 1974 SOLAS Convention, but shall at least comply with the provisions in Chapter IV of this Annex.
The provisions for navigation bridge visibility in Regulation V/22 of the 1974 SOLAS Convention, shall as far as is practicable and reasonable apply also to ships of less than 55 meters’ in length, where “length” is as defined in Regulation V/2 of the 1974 SOLAS Convention.
Wherever the application of an IMO resolution is required in this Annex for existing ships, ships constructed until two years after the date of adoption by IMO of such resolution need not comply with such resolution provided they comply with the applicable previous resolution(s), if any.
Under repairs, alterations and modifications of a “major character” is understood, by way of example:
any change that substantially alters the dimensions of a ship,
example: lengthening by adding new midbody,
any change that substantially alters the passenger-carrying capacity of a ship,
example: vehicle deck converted to passenger accommodation,
any change that substantially increases a ship’s service life,
example: renewal of passenger accommodation on one entire deck.
The indication “(R…)” that follows several titles of regulations in this Annex refers to the regulations of the 1974 SOLAS Convention, on which the regulations of this Annex have been based i.e.:
.1 Chapter II-1: Part A-1, references are made to SOLAS including 2006 amendments.
.2 Chapter II-1: Part A and B, references are made to SOLAS including 96/98 amendments.
.3 Chapter II-2: Part A, Regulations 1 and 2, references are made to SOLAS including 1999/2000 amendments. Regulation 1.3, reference is made to Part F (Alternative design and arrangements) of the revised Chapter II-2 (2000 Amendments) of SOLAS 1974, for new ships constructed on or after 1 January 2003. Chapter II-2: Part A, Regulations 3 – 16 and Part B, Regulations 1 – 18, references are made to SOLAS including 96/98 amendments.
.4 Chapter III: References are made to SOLAS 96/98 amendments and 2001 - 2003 amendments.
Provisions applicable to CLASS A SHIPS can be found in:
Chapter II-1/A-1, Regulation 1,
Chapter II-1/B, Regulations 1, 23 and 24,
Chapter II-1/C, Regulations 1, 3, and 16,
Chapter II-2/A, Regulations 4, 9 and 12, and
Chapter II-2/B, Regulation 6
Provisions applicable to CLASS A RO-RO PASSENGER SHIPS:
Chapter II-1/B, Regulations 17-2 and 20,
.1 1. Subdivision load line is the waterline used in determining the subdivision of the ship.
Deepest subdivision load line is the waterline which corresponds to the greatest draught permitted by the subdivision requirements which are applicable.
.2 Length of the ship is the length measured between perpendiculars taken at the extremities of the deepest subdivision load line.
.3 Breadth of the ship is the extreme width from outside of frame to outside of frame at or below the deepest subdivision load line.
.4 Draught is the vertical distance from the moulded base line amidships to the subdivision load line in question.
.5 Deadweight is the difference in tonnes between the displacement of a ship in water of a specific gravity of 1,025 at the load waterline corresponding to the assigned summer freeboard and the lightweight of the ship.
.6 Lightweight is the displacement of a ship in tonnes without cargo, fuel, lubricating oil, ballast water, fresh water and feedwater in tanks, consumable stores, and passengers and crew and their effects.
.7 Bulkhead deck is the uppermost deck up to which the transverse watertight bulkheads are carried.
.8 Margin line is a line drawn at least 76 mm below the upper surface of the bulkhead deck at side.
.9 Permeability of a space is the percentage of that space which can be occupied by water. The volume of a space which extends above the margin line shall be measured only to the height of that line.
.10 Machinery space is to be taken as extending from the moulded base line to the margin line and between the extreme main transverse watertight bulkheads, bounding the spaces containing the main and auxiliary propulsion machinery, and boilers serving the needs of propulsion.
.11 Passenger spaces are those spaces which are provided for the accommodation and use of passengers, excluding baggage, store, provision and mail rooms.
.12 Watertight in relation to structure means capable of preventing the passage of water through the structure in any direction under the head of water likely to occur in the intact or damage condition.
.13 Weathertight means that water will not penetrate into the ship in any sea conditions.
.14 Ro-ro passenger ship means a passenger ship with ro-ro cargo spaces or special category spaces as defined in Regulation II-2/A/2.
.1 1. Steering gear control system is the equipment by which orders are transmitted from the navigating bridge to the steering gear power units. Steering gear control systems comprise transmitters, receivers, hydraulic control pumps and their associated motors, motor controllers, piping and cables.
Main steering gear is the machinery, rudder actuators, steering gear power units, if any, and ancillary equipment and the means of applying torque to the rudder stock (e.g. tiller or quadrant) necessary for effecting movement of the rudder for the purpose of steering the ship under normal service conditions.
.2 Steering gear power unit is:
in the case of electric steering gear, an electric motor and its associated electrical equipment;
in the case of electrohydraulic steering gear, an electric motor and its associated electrical equipment and connected pump;
in the case of other hydraulic steering gear, a driving engine and connected pump.
.3 Auxiliary steering gear is the equipment other than any part of the main steering gear necessary to steer the ship in the event of failure of the main steering gear but not including the tiller, quadrant or components serving the same purpose.
.4 Normal operational and habitable condition is a condition under which the ship as a whole, the machinery, services, means and aids ensuring propulsion, ability to steer, safe navigation, fire and flooding safety, internal and external communications and signals, means of escape, and emergency boat winches, as well as the designed comfortable conditions of habitability are in working order and functioning normally.
.5 Emergency condition is a condition under which any services needed for normal operational and habitable conditions are not in working order due to failure of the main source of electrical power.
.6 Main source of electrical power is a source intended to supply electrical power to the main switchboard for distribution to all services necessary for maintaining the ship in normal operational and habitable condition.
.7 Dead ship condition is the condition under which the main propulsion plant, boilers and auxiliaries are not in operation due to the absence of power.
.8 Main generating station is the space in which the main source of electrical power is situated.
.9 Main switchboard is a switchboard which is directly supplied by the main source of electrical power and is intended to distribute electrical energy to the ship’s services.
.10 Emergency switchboard is a switchboard which in the event of failure of the main electrical power supply system is directly supplied by the emergency source of electrical power or the transitional source of emergency power and is intended to distribute electrical energy to the emergency services.
.11 Emergency source of electrical power is a source of electrical power, intended to supply the emergency switchboard in the event of failure of the supply from the main source of electrical power.
.12 Maximum ahead service speed is the greatest speed which the ship is designed to maintain in service at sea at the deepest seagoing draught.
.13 Maximum astern speed is the speed which it is estimated the ship can attain at the designed maximum astern power at the deepest seagoing draught.
.14(a) Machinery spaces are all machinery spaces of category A and all other spaces containing propelling machinery, boilers, oil fuel units, steam and internal combustion engines, generators and major electrical machinery, oil filling stations, refrigerating, stabilising, ventilation and air conditioning machinery, and similar spaces, and trunks to such spaces.
.14(b) Machinery spaces of category A are those spaces and trunks to such spaces which contain:
.1 internal combustion machinery used for main propulsion; or
.2 internal combustion machinery used for purposes other than main propulsion where such machinery has in the aggregate a total power output of not less than 375 kW; or
.3 any oil-fired boiler or oil fuel unit.
.15 Power actuating system is the hydraulic equipment provided for supplying power to turn the rudderstock, comprising a steering gear power unit or units, together with the associated pipes and fittings, and a rudder actuator. The power actuating systems may share common mechanical components, i.e. tiller, quadrant and rudder stock, or components serving the same purpose.
.16 Control stations are those spaces in which the ship’s radio or main navigating equipment or the emergency source of power is located or where the fire recording or fire control equipment is centralised.
.1 This Regulation shall apply to materials used for the structure, machinery, electrical installations and equipment covered by the Regulations of this Annex.
.2 For all ships, new installation of materials which contain asbestos shall be prohibited.
.1 A set of as-built construction drawings and other plans showing any subsequent structural alterations shall be kept on board ships constructed on or after 1 January 2012.
.2 An additional set of such drawings shall be kept ashore by the Company, as defined in Regulation IX/1.2 of the 1974 SOLAS Convention.
.3 Reference is made to the IMO MSC/Circ.1135 on “As-built construction drawings to be maintained on board the ship and ashore”.
.1 Ships shall be provided with arrangements, equipment and fittings of sufficient safe working load to enable the safe conduct of all towing and mooring operations associated with the normal operation of the ship.
.2 Arrangements, equipment and fittings provided in accordance with paragraph 1 shall comply with the standards specified for classification by the rules of a recognised organisation, or equivalent rules used by an Administration in accordance with Article 14(2) of Directive 94/57/EC.
.3 Reference is made to the IMO MSC/Circ.1175 on “Guidance on shipboard towing and mooring equipment”.
.4 Each fitting or item of equipment provided under this Regulation shall be clearly marked with any restrictions associated with its safe operation, taking into account the strength of its attachment to the ship’s structure.
Class B, C and D ships the keel of which was laid on or after 1 January 2009, or which were at a similar stage of construction on that date, shall apply the requirements in part B-2 or, alternatively, the appropriate provisions of SOLAS Chapter II-I, part B, as laid down in Annex 2 of Resolution MSC 216(82).
All classes of new ships of 24 metres in length and above shall comply with the relevant provisions for passenger ships of the Code on Intact Stability as adopted by the IMO Resolution A.749(18), as amended.
Where Member States consider the application of the Severe Wind and Rolling Criterion of IMO Resolution A.749(18), as amended, inappropriate, an alternative approach ensuring satisfactory stability may be applied. This should be supported by evidence to the Commission which confirms that an equivalent level of safety is achieved.
All existing class A and B ships shall, in all loading conditions, satisfy the following stability criteria after due correction for the effect of free surface of liquids in tanks in accordance with the assumptions of paragraph 3.3 of IMO Resolution A.749(18) as amended, or equivalent.
The area under the curve of righting lever (GZ curve) shall not be less than:
0,055 metre-radians up to an angle of heel of 30 °;
0,09 metre-radians up to an angle of heel of either 40 ° or the angle of flooding, i.e. the angle of heel at which the lower edges of any openings in the hull, superstructures or deckhouses, being openings that cannot be closed weathertight, are immersed, if that angle be less than 40 °;
0,03 metre-radians between the angles of heel of 30 ° and 40 ° or between 30 ° and the angle of flooding if this angle is less than 40 °;
The righting lever GZ shall be at least 0,20 metre at an angle of heel equal to or greater than 30 °.
The maximum righting lever GZ shall occur at an angle of heel preferably exceeding 30 ° but not less than 25 °.
The initial transverse metacentric height shall not be less than 0,15 metre.
The loading conditions to be considered in order to verify the compliance with the above stability criteria shall include at least those listed in paragraph 3.5.1.1 of IMO Resolution A.749(18), as amended.
All existing ships of classes A and B having a length of 24 metres and over shall also comply with the additional criteria as given in IMO Resolution A.749(18), as amended, paragraph 3.1.2.6 (additional criteria for passenger ships) and paragraph 3.2 (Severe Wind and Rolling Criterion).
Where Member States consider the application of the Severe Wind and Rolling Criterion of IMO Resolution A.749(18), as amended, inappropriate, an alternative approach to ensuring satisfactory stability may be applied. This should be supported by evidence to the Commission which confirms that an equivalent level of safety is achieved.
Every ship shall be subdivided by bulkheads, which shall be watertight up to the bulkhead deck, into watertight compartments the maximum length of which shall be calculated according to the specific requirements given below.
Instead of those requirements, the Regulations on subdivision and stability of passenger ships as an equivalent to Part B of Chapter II of the International Convention for the Safety of Life at Sea, 1960, as given in IMO Resolution A.265(VIII) may be used, if applied in their entirety.
Every other portion of the internal structure which affects the efficiency of the subdivision of the ship shall be watertight.
.1 The floodable length at a given point is the maximum portion of the length of the ship, having its centre at the point in question, which can be flooded, under the assumption for permeability given below, without the ship being submerged beyond the margin line.
.2 In case of a ship not having a continuous bulkhead deck, the floodable length at any point may be determined to an assumed continuous margin line which at no point is less than 76 mm below the top of the deck at side to which the bulkheads concerned and the shell are carried watertight.
.3 Where a portion of an assumed margin line is appreciably below the deck to which bulkheads are carried, the Administration of the flag State may permit a limited relaxation in the watertightness of those portions of the bulkheads which are above the margin line and immediately under the higher deck.
The maximum permissible length of a compartment having its centre at any point in the ship’s length is obtained from the floodable length by multiplying the latter by an appropriate factor called factor of subdivision.
The definite assumptions referred to in Regulation 3 relate to the permeability of the spaces below the margin line.
In determining the floodable length, the assumed average permeability of the spaces below the margin line shall be as indicated in the table in Regulation 8.3.
The factor of subdivision shall be:
1,0 when the ship is certified to carry less than 400 persons, and
1,0 when the ship is certified to carry 400 persons or more with a length a L<55, and
0,5 when the ship is certified to carry 400 persons or more.
Existing class B ro-ro passenger ships have to comply with this requirement not later than the date of compliance laid down in Regulation II-1/B/8-2, paragraph 2.
The factor of subdivision shall be: 1,0
.1 Where in a portion or portions of a ship the watertight bulkheads are carried to a higher deck than in the remainder of the ship and it is desired to take advantage of this higher extension of the bulkheads in calculating the floodable length, separate margin lines may be used for each such portion of the ship provided that:
.1 the sides of the ship are extended throughout the ship’s length to the deck corresponding to the upper margin line and all openings in the shell plating below this deck throughout the length of the ship are treated as being below a margin line, for the purpose of Regulation 15; and
.2 the two compartments adjacent to the “step” in the bulkhead deck are each within the permissible length corresponding to their respective margin lines, and, in addition, their combined length does not exceed twice the permissible length based on the lower margin line.
.2 A compartment may exceed the permissible length determined by the rules of Regulation 4 provided the combined length of each pair of adjacent compartments to which the compartment in question is common does not exceed either the floodable length or twice the permissible length, whichever is less.
.3 A main transverse bulkhead may be recessed provided that all parts of the recess lie inboard of vertical surfaces on both sides of the ship, situated at a distance from the shell plating equal to one fifth of the breadth of the ship, and measured at right angles to the centreline at the level of the deepest subdivision load line. Any part of a recess which lies outside these limits shall be dealt with as a step in accordance with paragraph 6.
.4 Where a main transverse bulkhead is recessed or stepped, an equivalent plane bulkhead shall be used in determining the subdivision.
.5 Where a main transverse watertight compartment contains local subdivision and the Administration of the flag State is satisfied that, after any assumed side damage extending over a length of 3,0 metres plus 3 % of the length of the ship or 11,0 metres, or 10 % of the length of the ship whichever is the less, the whole volume of the main compartment will not be flooded, a proportionate allowance may be made in the permissible length otherwise required for such compartment. In such a case the volume of the effective buoyancy assumed on the undamaged side shall not be greater than that assumed on the damaged side.
Allowance under this paragraph will only be made if such allowance is not likely to prevent compliance with Regulation 8.
.6 A main transverse bulkhead may be stepped provided that it meets one of the following conditions:
.1 the combined length of the two compartments, separated by the bulkhead in question, does not exceed either 90 % of the floodable length or twice the permissible length, except that, in ships having a subdivision factor equal to 1, the combined length of the two compartments in question shall not exceed the permissible length;
.2 additional subdivision is provided in way of the step to maintain the same level of safety as that secured by a plane bulkhead;
.3 the compartment over which the step extends does not exceed the permissible length corresponding to a margin line taken 76 mm below the step.
.7 In ships of 100 metres in length and upwards, one of the main transverse bulkheads abaft the forepeak shall be fitted at a distance from the forward perpendicular which is not greater than the permissible length.
.8 If the distance between two adjacent main transverse bulkheads, or their equivalent plank bulkheads, or the distance between the transverse planes passing through the nearest stepped portions of the bulkheads, is less than 3,0 metres plus 3 % of the length of the ship, or 11,0 metres, or 10 % of the length of the ship, whichever is less, only one of these bulkheads shall be regarded as forming part of the subdivision of the ship.
.9 Where the required subdivision factor is 0,50, the combined length of any two adjacent compartments shall not exceed the floodable length.
.1.1 Sufficient intact stability shall be provided in all service conditions so as to enable the ship to withstand the final stage of flooding of any one main compartment which is required to be within the floodable length.
.1.2 Where two adjacent main compartments are separated by a bulkhead which is stepped under the conditions of Regulation 7.6.1, the intact stability shall be adequate to withstand the flooding of those two adjacent compartments.
.1.3 Where the required factor of subdivision is 0,50, the intact stability shall be adequate to withstand the flooding of any two adjacent compartments.
.2.1 The requirements of subparagraph .1 shall be determined by calculations which are in accordance with paragraphs .3, .4 and .6 and which take into consideration the proportions and design characteristics of the ship and the arrangement and configuration of the damaged compartments. In making these calculations the ship is to be assumed in the worst anticipated service condition as regards stability.