Art. 15 Directive (EU) 2010/35

Rules and conditions for the affixing of the Pi marking

In forcesince 16 Jun 2010cited 5×
1.

The Pi marking shall consist of the following symbol in the following form:

2.

The minimum height of the Pi marking shall be 5 mm. For transportable pressure equipment with a diameter less than or equal to 140 mm the minimum height shall be 2,5 mm.

3.

The proportions given in the graduated drawing in paragraph 1 shall be respected. The grid does not form part of the marking.

4.

The Pi marking shall be affixed visibly, legibly and permanently to the transportable pressure equipment or to its data plate as well as to demountable parts of refillable transportable pressure equipment having a direct safety function.

5.

The Pi marking shall be affixed before the new transportable pressure equipment or demountable parts of refillable transportable pressure equipment having a direct safety function are placed on the market.

6.

The Pi marking shall be followed by the identification number of the notified body involved in the initial inspections and tests.

The identification number of the notified body shall be affixed by the body itself, or under its instructions, by the manufacturer.

7.

The marking of the date of the periodic inspection or, where appropriate, the intermediate inspection shall be accompanied by the identification number of the notified body responsible for the periodic inspection.

8.

With regard to gas cylinders previously in compliance with Directives 84/525/EEC, 84/526/EEC or 84/527/EEC not bearing the Pi marking, when the first periodic inspection is carried out in accordance with this Directive, the identification number of the notified body responsible shall be preceded by the Pi marking.

  • Code de l'environnementr557-11-6Law

    Le marquage mentionné à l'article L. 557-4 est le marquage “ Pi ” tel que défini aux points 1 à 3 de l'article 15 de la directive 2010/35/UE du Parlement européen et du Conseil du 16 juin 2010 relative aux équipements sous …

  • Ortsbewegliche-Druckgeräte-Verordnung233Law

    … die Pi-Kennzeichnung unter Nichteinhaltung von Artikel 12, Artikel 13, Artikel 14 oder Artikel 15 der Richtlinie 2010/35/EU angebracht worden ist; 2. die Pi-Kennzeichnung fehlt; 3. die technischen Unterlagen nicht verfügbar oder …

  • OCMDLaw

    Anhang 2 (Art. 8 Abs. 1) Pi-Kennzeichnung 1. Die Dimensionen der folgenden Pi-Kennzeichnung sind in Artikel 15 der Richtlinie 2010/35 EU definiert. Die Abbildung hat informativen Charakter. 2. Die Pi-Kennzeichnung ist deutlich sichtbar, …

  • Decision_act (EU) 2022/834Law

    … бутилката от производителя, не е отговаряла на изискванията на член 15 от Директива 2010/35/ЕС относно физическата форма на гръцката …

  • Ortsbewegliche-Druckgeräte-Verordnung233Law