1. In the case of catching vessels which are not equipped with a continuous monitoring system as provided in Article 39a, Member States shall undertake, following a risk analysis, undertake data verification, established on in accordance with a sampling plan based on the methodology adopted by the Commission to be adopted in accordance with the procedure referred to in paragraph 5 of this Article 119, of the consistency of engine power using all the information available to the administration concerning the technical characteristics of the vessel concerned. In particular, they shall verify the information contained in:
(a) vessel monitoring system recordsposition data;
(b) the fishing logbook data;
(c) the Engine International Air Pollution Prevention (EIAPP) Certificatecertificate issued for the engine in accordance with Annex VI to the MarpolMARPOL 73/78 Convention;
(d) class certificates issued by a recognised ship inspection and survey organisation within the meaning of Directive 94/57/EC2009/15/EC of the European Parliament and of the Council [Directive 2009/15/EC of the European Parliament and of the Council of 23 April 2009 on common rules and standards for ship inspection and survey organisations and for the relevant activities of maritime administrations (OJ L 131, 28.5.2009, p. 47).];
(f) the Community Fishing Fleet RegisterUnion fishing fleet register; and
2. Following Where, following the analysis of the information referred to in paragraph 1, where there are indications that the engine power of a fishingcatching vessel is greater than exceeds the power stated on itsindicated in the fishing licence or in the Union or national fishing fleet register, Member States shall proceed towith a physical verification of the engine power. or shall ensure that the catching vessel concerned is equipped with a system referred to in Article 39a(1).
3. For the purpose of verifying the engine power of a catching vessel, Member States shall apply the requirements adopted by the International Organisation for Standardisation in its recommended International Standard ISO 15016:2015 or equivalent European or national recognised methods.
4. The Commission is empowered to adopt delegated acts in accordance with Article 119a amending paragraph 3 of this Article in order to adapt the reference to the relevant ISO International Standard to technical progress.
5. The Commission may, by means of implementing acts, lay down detailed rules concerning the verification of engine power, including the methodology for establishing the sampling plan. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 119(2).