ANNEX I, Council Regulation (EC) No 428/2009 of 5 May 2009 setting up a Community regime for the…

In forcesince 1 Jan 2021cited 1×

This list implements internationally agreed dual-use controls including the Australia Group [https://www.australiagroup.net/], the Missile Technology Control Regime (MTCR) [http://mtcr.info/], the Nuclear Suppliers Group (NSG) [http://www.nuclearsuppliersgroup.org/], the Wassenaar Arrangement [http://www.wassenaar.org/] and the Chemical Weapons Convention (CWC) [https://www.opcw.org/chemical-weapons-convention].

1.

For control of goods which are designed or modified for military use, see the relevant list(s) of controls on military goods maintained by individual EU Member States. References in this Annex that state ‘SEE ALSO MILITARY GOODS CONTROLS’ refer to the same lists.

2.

The object of the controls contained in this Annex should not be defeated by the export of any non-controlled goods (including plant) containing one or more controlled components when the controlled component or components are the principal element of the goods and can feasibly be removed or used for other purposes.

NB: In judging whether the controlled component or components are to be considered the principal element, it is necessary to weigh the factors of quantity, value and technological know-how involved and other special circumstances which might establish the controlled component or components as the principal element of the goods being procured.

3.

Goods specified in this Annex include both new and used goods.

4.

In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.

(To be read in conjunction with section E of Category 0.)

The ‘technology’ directly associated with any goods controlled in Category 0 is controlled according to the provisions of Category 0.

‘Technology’ for the ‘development’, ‘production’ or ‘use’ of goods under control remains under control even when applicable to non-controlled goods.

The approval of goods for export also authorizes the export to the same end-user of the minimum ‘technology’ required for the installation, operation, maintenance and repair of the goods.

Controls on ‘technology’ transfer do not apply to information ‘in the public domain’ or to ‘basic scientific research’.

(To be read in conjunction with section E of Categories 1 to 9.)

The export of ‘technology’ which is ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods controlled in Categories 1 to 9, is controlled according to the provisions of Categories 1 to 9.

‘Technology’ ‘required’ for the ‘development’, ‘production’ or ‘use’ of goods under control remains under control even when applicable to non-controlled goods.

Controls do not apply to that ‘technology’ which is the minimum necessary for the installation, operation, maintenance (checking) or repair of those goods which are not controlled or whose export has been authorised.

Note: This does not release such ‘technology’ specified in 1E002.e., 1E002.f., 8E002.a. and 8E002.b.

Controls on ‘technology’ transfers do not apply to information ‘in the public domain’, to ‘basic scientific research’ or to the minimum necessary information for patent applications.

(This note overrides any control within section D of Category 0)

Section D of Category 0 of this list does not control ‘software’ which is the minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.

The approval of goods for export also authorises the export to the same end-user of the minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of the goods

Note: The Nuclear Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).

(This note overrides any control within section D of Categories 1 to 9.)

Categories 1 to 9 of this list do not control ‘software’ which is any of the following:

a.

Generally available to the public by being:

1.

Sold from stock at retail selling points, without restriction, by means of:

a.

Over-the-counter transactions;

b.

Mail order transactions;

c.

Electronic transactions; or

d.

Telephone call transactions; and

2.

Designed for installation by the user without further substantial support by the supplier;

Note: Entry a. of the General Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).

b.

‘In the public domain’; or

c.

The minimum necessary ‘object code’ for the installation, operation, maintenance (checking) or repair of those items whose export has been authorised.

Note: Entry c. of the General Software Note does not release ‘software’ specified in Category 5 – Part 2 (‘Information Security’).

‘Information security’ items or functions should be considered against the provisions in Category 5 – Part 2, even if they are components, ‘software’ or functions of other items.

In accordance with the rules set out in paragraph 6.5 on page 108 of the Interinstitutional style guide (2015 edition), for texts in English published in the Official Journal of the European Union:

a comma is used to separate the whole number from decimals,

whole numbers are presented in series of three, each series being separated by a thin space.

The text reproduced in this annex follows the above-described practice.

An acronym or abbreviation, when used as a defined term, are found in ‘Definitions of Terms used in this Annex’.

Acronym or meaning abbreviation

ABEC | Annular Bearing Engineers Committee

ABMA | American Bearing Manufacturers Association

ADC | Analogue-to-Digital Converter

AGMA | American Gear Manufacturers’ Association

AHRS | Attitude and Heading Reference Systems

AISI | American Iron and Steel Institute

ALE | Atomic Layer Epitaxy

ALU | Arithmetic Logic Unit

ANSI | American National Standards Institute

APP | Adjusted Peak Performance

APU | Auxiliary Power Unit

ASTM | American Society for Testing and Materials

ATC | Air Traffic Control

BJT | Bipolar Junction Transistors

BPP | Beam Parameter Product

BSC | Base Station Controller

CAD | Computer-Aided-Design

CAS | Chemical Abstracts Service

CCD | Charge Coupled Device

CDU | Control and Display Unit

CEP | Circular Error Probable

CMM | Coordinate Measuring Machine

CMOS | Complementary Metal Oxide Semiconductor

CNTD | Controlled Nucleation Thermal Deposition

CPLD | Complex Programmable Logic Device

CPU | Central Processing Unit

CVD | Chemical Vapour Deposition

CW | Chemical Warfare

CW (for lasers) | Continuous Wave

DAC | Digital-to-Analogue Converter

DANL | Displayed Average Noise Level

DBRN | Data-Base Referenced Navigation

DDS | Direct Digital Synthesizer

DMA | Dynamic Mechanical Analysis

DME | Distance Measuring Equipment

DMOSFET | Diffused Metal Oxide Semiconductor Field Effect Transistor

DS | Directionally Solidified

EB | Exploding Bridge

EB-PVD | Electron Beam Physical Vapour Deposition

EBW | Exploding Bridge Wire

ECM | Electro-Chemical Machining

EDM | Electrical Discharge Machines

EFI | Exploding Foil Initiators

EIRP | Effective Isotropic Radiated Power

EMP | Electromagnetic Pulse

ENOB | Effective Number of Bits

ERF | Electrorheological Finishing

ERP | Effective Radiated Power

ESD | Electrostatic Discharge

ETO | Emitter Turn-Off Thyristor

ETT | Electrical Triggering Thyristor

EU | European Union

EUV | Extreme Ultraviolet

FADEC | Full Authority Digital Engine Control

FFT | Fast Fourier Transform

FPGA | Field Programmable Gate Array

FPIC | Field Programmable Interconnect

FPLA | Field Programmable Logic Array

FPO | Floating Point Operation

FWHM | Full-Width Half-Maximum

GLONASS | Global Navigation Satellite System

GNSS | Global Navigation Satellite System

GPS | Global Positioning System

GSM | Global System for Mobile Communications

GTO | Gate Turn-off Thyristor

HBT | Hetero-Bipolar Transistors

HDMI | High-Definition Multimedia Interface

HEMT | High Electron Mobility Transistor

ICAO | International Civil Aviation Organization

IEC | International Electro-technical Commission

IED | Improvised Explosive Device

IEEE | Institute of Electrical and Electronic Engineers

IFOV | Instantaneous-Field-Of-View

IGBT | Insulated Gate Bipolar Transistor

IGCT | Integrated Gate Commutated Thyristor

IHO | International Hydrographic Organization

ILS | Instrument Landing System

IMU | Inertial Measurement Unit

INS | Inertial Navigation System

IP | Internet Protocol

IRS | Inertial Reference System

IRU | Inertial Reference Unit

ISA | International Standard Atmosphere

ISAR | Inverse Synthetic Aperture Radar

ISO | International Organization for Standardization

ITU | International Telecommunication Union

JT | Joule-Thomson

LIDAR | Light Detection and Ranging

LIDT | Laser Induced Damage Threshold

LOA | Length Overall

LRU | Line Replaceable Unit

LTT | Light Triggering Thyristor

MLS | Microwave Landing Systems

MMIC | Monolithic Microwave Integrated Circuit

MOCVD | Metal Organic Chemical Vapour Deposition

MOSFET | Metal-Oxide-Semiconductor Field Effect Transistor

MPM | Microwave Power Module

MRF | Magnetorheological Finishing

MRF | Minimum Resolvable Feature size

MRI | Magnetic Resonance Imaging

MTBF | Mean-Time-Between-Failures

MTTF | Mean-Time-To-Failure

NA | Numerical Aperture

NDT | Non-Destructive Test

NEQ | Net Explosive Quantity

NIJ | National Institute of Justice

OAM | Operations, Administration or Maintenance

OSI | Open Systems Interconnection

PAI | Polyamide-imides

PAR | Precision Approach Radar

PCL | Passive Coherent Location

PDK | Process Design Kit

PIN | Personal Identification Number

PMR | Private Mobile Radio

PVD | Physical Vapour Deposition

ppm | parts per million

QAM | Quadrature-Amplitude-Modulation

QE | Quantum Efficiency

RAP | Reactive Atom Plasmas

RF | Radio Frequency

rms | Root Mean Square

RNC | Radio Network Controller

RNSS | Regional Navigation Satellite System

ROIC | Read-out Integrated Circuit

S-FIL | Step and Flash Imprint Lithography

SAR | Synthetic Aperture Radar

SAS | Synthetic Aperture Sonar

SC | Single Crystal

SCR | Silicon Controlled Rectifier

SFDR | Spurious Free Dynamic Range

SHPL | Super High Powered Laser

SLAR | Sidelooking Airborne Radar

SOI | Silicon-on-Insulator

SQUID | Superconducting Quantum Interference Device

SRA | Shop Replaceable Assembly

SRAM | Static Random Access Memory

SSB | Single Sideband

SSR | Secondary Surveillance Radar

SSS | Side Scan Sonar

TIR | Total Indicated Reading

TVR | Transmitting Voltage Response

u | Atomic Mass Unit

UPR | Unidirectional Positioning Repeatability

UV | Ultraviolet

UTS | Ultimate Tensile Strength

VJFET | Vertical Junction Field Effect Transistor

VOR | Very High Frequency Omni-directional Range

WHO | World Health Organization

WLAN | Wireless Local Area Network

Definitions of terms between ‘single quotation marks’ are given in a Technical Note to the relevant item.

Definitions of terms between ‘double quotation marks’ are as follows:

NB: Category references are given in brackets after the defined term.

‘Accuracy’ (2 3 6 7 8), usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.

‘Active flight control systems’ (7) are systems that function to prevent undesirable ‘aircraft’ and missile motions or structural loads by autonomously processing outputs from multiple sensors and then providing necessary preventive commands to effect automatic control.

‘Active pixel’ (6) is a minimum (single) element of the solid state array which has a photoelectric transfer function when exposed to light (electromagnetic) radiation.

‘Adjusted Peak Performance’ (4) is an adjusted peak rate at which ‘digital computers’ perform 64-bit or larger floating point additions and multiplications, and is expressed in Weighted TeraFLOPS (WT) with units of 1012 adjusted floating point operations per second.

NB: See Category 4, Technical Note.

‘Aircraft’ (1 6 7 9) means a fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle.

NB: See also ‘civil aircraft’.

‘Airship’ (9) means a power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air.

‘All compensations available’ (2) means after all feasible measures available to the manufacturer to minimise all systematic positioning errors for the particular machine-tool model or measuring errors for the particular coordinate measuring machine are considered.

‘Allocated by the ITU’ (3 5) means the allocation of frequency bands according to the current edition of the ITU Radio Regulations for primary, permitted and secondary services.

NB: Additional and alternative allocations are not included.

‘Angular position deviation’ (2) means the maximum difference between angular position and the actual, very accurately measured angular position after the workpiece mount of the table has been turned out of its initial position.

‘Angle random walk’ (7) means the angular error build up with time that is due to white noise in angular rate (IEEE STD 528-2001).

‘APP’ (4) is equivalent to ‘Adjusted Peak Performance’.

‘Asymmetric algorithm’ (5) means a cryptographic algorithm using different, mathematically-related keys for encryption and decryption.

NB: A common use of ‘asymmetric algorithms’ is key management.

‘Authentication’ (5) means verifying the identity of a user, process or device, often as a prerequisite to allowing access to resources in an information system. This includes verifying the origin or content of a message or other information, and all aspects of access control where there is no encryption of files or text except as directly related to the protection of passwords, Personal Identification Numbers (PINs) or similar data to prevent unauthorized access.

‘Average output power’ (6) means the total ‘laser’ output energy, in joules, divided by the period over which a series of consecutive pulses is emitted, in seconds. For a series of uniformly spaced pulses it is equal to the total ‘laser’ output energy in a single pulse, in joules, multiplied by the pulse frequency of the ‘laser’, in Hertz.

‘Basic gate propagation delay time’ (3) means the propagation delay time value corresponding to the basic gate used in a ‘monolithic integrated circuit’. For a ‘family’ of ‘monolithic integrated circuits’, this may be specified either as the propagation delay time per typical gate within the given ‘family’ or as the typical propagation delay time per gate within the given ‘family’.

N.B.1. ‘Basic gate propagation delay time’ is not to be confused with the input/output delay time of a complex ‘monolithic integrated circuit’.

N.B.2. ‘Family’ consists of all integrated circuits to which all of the following are applied as their manufacturing methodology and specifications except their respective functions:

a.

The common hardware and software architecture;

b.

The common design and process technology; and

c.

The common basic characteristics.

‘Basic scientific research’ (GTN NTN) means experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.

‘Bias’ (accelerometer) (7) means the average over a specified time of accelerometer output, measured at specified operating conditions, that has no correlation with input acceleration or rotation. ‘Bias’ is expressed in g or in metres per second squared (g or m/s2). (IEEE Std 528-2001) (Micro g equals 1x10–6 g).

‘Bias’ (gyro) (7) means the average over a specified time of gyro output measured at specified operating conditions that has no correlation with input rotation or acceleration. ‘Bias’ is typically expressed in degrees per hour (deg/hr). (IEEE Std 528-2001).

‘Biological agents’ (1) are pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.

‘Camming’ (2) means axial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle faceplate, at a point next to the circumference of the spindle faceplate (Reference: ISO 230-1:1986, paragraph 5.63).

‘CEP’ (7) means ‘Circular Error Probable’ – In a circular normal distribution, the radius of the circle containing 50 % of the individual measurements being made, or the radius of the circle within which there is a 50 % probability of being located.

‘Chemical laser’ (6) means a ‘laser’ in which the excited species is produced by the output energy from a chemical reaction.

‘Chemical mixture’ (1) means a solid, liquid or gaseous product made up of two or more components which do not react together under the conditions under which the mixture is stored.

‘Circulation-controlled anti-torque or circulation controlled direction control systems’ (7) are systems that use air blown over aerodynamic surfaces to increase or control the forces generated by the surfaces.

‘Civil aircraft’ (1 3 4 7) means those ‘aircraft’ listed by designation in published airworthiness certification lists by the civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.

NB: See also ‘aircraft’.

‘Communications channel controller’ (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access.

‘Compensation systems’ (6) consist of the primary scalar sensor, one or more reference sensors (e.g., vector ‘magnetometers’) together with software that permit reduction of rigid body rotation noise of the platform.

‘Composite’ (1 2 6 8 9) means a ‘matrix’ and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes.

‘III/V compounds’ (3 6) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev’s periodic classification table (e.g., gallium arsenide, gallium-aluminium arsenide, indium phosphide).

‘Contouring control’ (2) means two or more ‘numerically controlled’ motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated. (ref. ISO/DIS 2806 – 1980).

‘Critical temperature’ (1 3 5) (sometimes referred to as the transition temperature) of a specific ‘superconductive’ material means the temperature at which the material loses all resistance to the flow of direct electrical current.

‘Cryptographic activation’ (5) means any technique that specifically activates or enables cryptographic capability of an item, by means of a mechanism implemented by the manufacturer of the item, where this mechanism is uniquely bound to any of the following:

1.

A single instance of the item; or

2.

One customer, for multiple instances of the item.

1.

‘Cryptographic activation’ techniques and mechanisms may be implemented as hardware, ‘software’ or ‘technology’.

2.

Mechanisms for ‘cryptographic activation’ can, for example, be serial number-based licence keys or authentication instruments such as digitally signed certificates.

‘Cryptography’ (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorized use. ‘Cryptography’ is limited to the transformation of information using one or more ‘secret parameters’ (e.g., crypto variables) or associated key management.

1.

‘Cryptography’ does not include ‘fixed’ data compression or coding techniques.

2.

‘Cryptography’ includes decryption.

1.

‘Secret parameter’: a constant or key kept from the knowledge of others or shared only within a group.

2.

‘Fixed’: the coding or compression algorithm cannot accept externally supplied parameters (e.g., cryptographic or key variables) and cannot be modified by the user.

‘CW laser’ (6) means a ‘laser’ that produces a nominally constant output energy for greater than 0,25 seconds.

‘Cyber incident response’ (4) means the process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.

‘Data-Based Referenced Navigation’ (‘DBRN’) (7) Systems means systems which use various sources of previously measured geo-mapping data integrated to provide accurate navigation information under dynamic conditions. Data sources include bathymetric maps, stellar maps, gravity maps, magnetic maps or 3-D digital terrain maps.

‘Depleted uranium’ (0) means uranium depleted in the isotope 235 below that occurring in nature.

‘Development’ (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.

‘Diffusion bonding’ (1 2 9) means a solid state joining of at least two separate pieces of metals into a single piece with a joint strength equivalent to that of the weakest material, wherein the principal mechanism is interdiffusion of atoms across the interface.

‘Digital computer’ (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following:

a.

Accept data;

b.

Store data or instructions in fixed or alterable (writable) storage devices;

c.

Process data by means of a stored sequence of instructions which is modifiable; and

d.

Provide output of data.

This article is long: the rest is at the official publication.