Art. 4 Directive (EU) 2009/48

Obligations of manufacturers

In forcesince 18 Jun 2009cited 10×
1.

When placing their toys on the market, manufacturers shall ensure that they have been designed and manufactured in accordance with the requirements set out in Article 10 and Annex II.

2.

Manufacturers shall draw up the required technical documentation in accordance with Article 21 and carry out or have carried out the applicable conformity assessment procedure in accordance with Article 19.

Where compliance of a toy with the applicable requirements has been demonstrated by that procedure, manufacturers shall draw up an EC declaration of conformity, as referred to in Article 15, and affix the CE marking, as set out in Article 17(1).

3.

Manufacturers shall keep the technical documentation and the EC declaration of conformity for a period of 10 years after the toy has been placed on the market.

4.

Manufacturers shall ensure that procedures are in place for series production to remain in conformity. Changes in toy design or characteristics and changes in the harmonised standards by reference to which conformity of a toy is declared shall be adequately taken into account.

When deemed appropriate with regard to the risks presented by a toy, manufacturers shall, to protect the health and safety of consumers, carry out sample testing of marketed toys, investigate, and, if necessary, keep a register of complaints, of non-conforming toys and toy recalls, and shall keep distributors informed of any such monitoring.

5.

Manufacturers shall ensure that their toys bear a type, batch, serial or model number or other element allowing their identification, or, where the size or nature of the toy does not allow it, that the required information is provided on the packaging or in a document accompanying the toy.

6.

Manufacturers shall indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the toy or, where that is not possible, on its packaging or in a document accompanying the toy. The address shall indicate a single point at which the manufacturer can be contacted.

7.

Manufacturers shall ensure that the toy is accompanied by instructions and safety information in a language or languages easily understood by consumers, as determined by the Member State concerned.

8.

Manufacturers who consider or have reason to believe that a toy which they have placed on the market is not in conformity with the relevant Community harmonisation legislation shall immediately take the corrective measures necessary to bring that toy into conformity, to withdraw it or recall it, if appropriate. Furthermore, where the toy presents a risk, manufactures shall immediately inform the competent national authorities of the Member States in which they made the toy available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

9.

Manufacturers shall, further to a reasoned request from a competent national authority, provide that authority with all the information and documentation necessary to demonstrate the conformity of the toy, in a language easily understood by that authority. They shall cooperate with that authority, at its request, as regards any action taken to eliminate the risks posed by toys which they have placed on the market.

  • Lebensmittelsicherheits- und Verbraucherschutzgesetz38Law

    … 3 PSG 2004 in Bezug auf Gebrauchsgegenstände, ausgenommen Spielzeug, c) gemäß Art. 4 Abs. 8, Art. 6 Abs. 7 und Art. 7 Abs. 4 der Richtlinie 2009/48/EG in Bezug auf Spielzeug und d) gemäß Art. 5 und Art. 6 der Verordnung (EG) Nr. …

  • VwGH 30.04.2019, Ro 2019/04/0013Decision

    Die konkret maßgeblichen Bestimmungen und zwar Art. 1, 4 Abs. 6, 7 Abs. 1 und 2, sowie 51 der Richtlinie 2009/48/EG des Europäischen Parlaments und des Rates vom 18. Juni 2009 über die Sicherheit von Spielzeug, ABl. L 170 vom 30. Juni …

    30 Apr 2019 · JWT_2019040013_20190430J00

  • Opinion of Advocate General Ćapeta delivered on 6 February 2025. French Republic v European Commission.Decision

    As the applicants at first instance in Case T‑279/20 and in Case T‑288/20 explain, such a classification brings with it, among other effects, a prohibition to use titanium dioxide in the production of cosmetic products and toys, [See, …

    6 Feb 2025 · 62023CC0071

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    30 Apr 2019 · JWR_2019040013_20190430J05

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    Da § 2 Z 2 Spielzeugkennzeichnungsverordnung unter anderem in Umsetzung des Art. 4 Abs. 6 der Richtlinie 2009/48/EG erlassen wurde, ist der Begriff "Kontaktanschrift" auf dem Boden des Unionsrechts so weit wie möglich im Lichte des …

    30 Apr 2019 · JWR_2019040013_20190430J02

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    30 Apr 2019 · JWR_2019040013_20190430J07

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    30 Apr 2019 · JWR_2019040013_20190430J03

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    30 Apr 2019 · JWR_2019040013_20190430J06

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    … § 2 Z 2 Spielzeugkennzeichnungsverordnung unter anderem die Angabe der Kontaktanschrift des Herstellers, womit die in Art. 4 Abs. 6 der Richtlinie 2009/48/EG normierte Pflicht des Herstellers, seine Kontaktanschrift am Spielzeug, auf der …

    30 Apr 2019 · JWR_2019040013_20190430J01

  • VwGH Rechtssatz, Ro 2019/04/0013Decision

    … Auslegung des Unionsrechts besteht kein vernünftiger Zweifel, dass die "Kontaktanschrift des Herstellers" iSd Art. 4 Abs. 6 der Richtlinie 2009/48/EG (vgl. den Begriff "Kontaktanschrift" in der englischen Version: "adress at which they …

    30 Apr 2019 · JWR_2019040013_20190430J04