4 Appendix to Annex III, Commission Regulation (EC) No 517/2008 of 10 June 2008 laying down detailed rules for th…

In forcesince 10 Jun 2008

To allow for creep in a stretched mesh:

1.

extend the movable jaw into the mesh at a constant speed of 300 ± 30 mm/min [Speed of the movable jaw during the stretching of the mesh. The unloaded speed of the movable jaw can be higher.], until the measurement force is reached;

2.

stop the motor and wait for 1 second;

3.

if the force drops below 80 % of the pre-set measurement force, extend the movable jaw into the mesh until the measurement force is reached once more.