ANNEX I REFERENCE PROVISIONS FOR COMMUNITY HARMONISATION LEGISLATION FOR PRODUCTS, Decision_act (EU) 2008/768

In force

Article R1

Definitions

For the purposes of this ... [act] the following definitions shall apply:

1.

‘making available on the market’ shall mean any supply of a product for distribution, consumption or use on the Community market in the course of a commercial activity, whether in return for payment or free of charge;

2.

‘placing on the market’ shall mean the first making available of a product on the Community market;

3.

‘manufacturer’ shall mean any natural or legal person who manufactures a product or has a product designed or manufactured, and markets that product under his name or trademark;

4.

‘authorised representative’ shall mean any natural or legal person established within the Community who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks;

5.

‘importer’ shall mean any natural or legal person established within the Community who places a product from a third country on the Community market;

6.

‘distributor’ shall mean any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a product available on the market;

7.

‘economic operators’ shall mean the manufacturer, the authorised representative, the importer and the distributor;

8.

‘technical specification’ shall mean a document that prescribes technical requirements to be fulfilled by a product, process or service;

9.

‘harmonised standard’ shall mean a standard adopted by one of the European standardisation bodies listed in Annex I to Directive 98/34/EC on the basis of a request made by the Commission in accordance with Article 6 of that Directive;

10.

‘accreditation’ shall have the meaning assigned to it by Regulation (EC) No 765/2008;

11.

‘national accreditation body’ shall have the meaning assigned to it by Regulation (EC) No 765/2008;

12.

‘conformity assessment’ shall mean the process demonstrating whether specified requirements relating to a product, process, service, system, person or body have been fulfilled;

13.

‘conformity assessment body’ shall mean a body that performs conformity assessment activities including calibration, testing, certification and inspection;

14.

‘recall’ shall mean any measure aimed at achieving the return of a product that has already been made available to the end user;

15.

‘withdrawal’ shall mean any measure aimed at preventing a product in the supply chain from being made available on the market;

16.

‘CE marking’ shall mean a marking by which the manufacturer indicates that the product is in conformity with the applicable requirements set out in Community harmonisation legislation providing for its affixing;

17.

‘Community harmonisation legislation’ shall mean any Community legislation harmonising the conditions for the marketing of products.

Article R2

Obligations of manufacturers

1.

When placing their products on the market, manufacturers shall ensure that they have been designed and manufactured in accordance with the requirements set out in … [reference to the relevant part of the legislation].

2.

Manufacturers shall draw up the required technical documentation and carry out the conformity assessment procedure applicable or have it carried out.

Where compliance of a product with the applicable requirements has been demonstrated by that procedure, manufacturers shall draw up an EC declaration of conformity and affix the conformity marking.

3.

Manufacturers shall keep the technical documentation and the EC declaration of conformity for ... [period to be specified in proportion to the lifecycle of the product and the level of risk] after the product has been placed on the market.

4.

Manufacturers shall ensure that procedures are in place for series production to remain in conformity. Changes in product design or characteristics and changes in the harmonised standards or in technical specifications by reference to which conformity of a product is declared shall be adequately taken into account.

When deemed appropriate with regard to the risks presented by a product, manufacturers shall, to protect the health and safety of consumers, carry out sample testing of marketed products, investigate, and, if necessary, keep a register of complaints, of non-conforming products and product recalls, and shall keep distributors informed of any such monitoring.

5.

Manufacturers shall ensure that their products bear a type, batch or serial number or other element allowing their identification, or, where the size or nature of the product does not allow it, that the required information is provided on the packaging or in a document accompanying the product.

6.

Manufacturers shall indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the product or, where that is not possible, on its packaging or in a document accompanying the product. The address must indicate a single point at which the manufacturer can be contacted.

7.

Manufacturers shall ensure that the product is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users, as determined by the Member State concerned.

8.

Manufacturers who consider or have reason to believe that a product which they have placed on the market is not in conformity with the applicable Community harmonisation legislation shall immediately take the necessary corrective measures to bring that product into conformity, to withdraw it or recall it, if appropriate. Furthermore, where the product presents a risk, manufacturers shall immediately inform the competent national authorities of the Member States in which they made the product available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

9.

Manufacturers shall, further to a reasoned request from a competent national authority, provide it with all the information and documentation necessary to demonstrate the conformity of the product, in a language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by products which they have placed on the market.

Article R3

Authorised representatives

1.

A manufacturer may, by a written mandate, appoint an authorised representative.

The obligations laid down in Article [R2(1)] and the drawing up of technical documentation shall not form part of the authorised representative's mandate.

2.

An authorised representative shall perform the tasks specified in the mandate received from the manufacturer. The mandate shall allow the authorised representative to do at least the following:

(a)

keep the EC declaration of conformity and the technical documentation at the disposal of national surveillance authorities for … [period to be specified in proportion to the lifecycle of the product and the level of risk];

(b)

further to a reasoned request from a competent national authority, provide that authority with all the information and documentation necessary to demonstrate the conformity of a product;

(c)

cooperate with the competent national authorities, at their request, on any action taken to eliminate the risks posed by products covered by their mandate.

Article R4

Obligations of importers

1.

Importers shall place only compliant products on the Community market.

2.

Before placing a product on the market importers shall ensure that the appropriate conformity assessment procedure has been carried out by the manufacturer. They shall ensure that the manufacturer has drawn up the technical documentation, that the product bears the required conformity marking or markings and is accompanied by the required documents, and that the manufacturer has complied with the requirements set out in Article [R2(5) and (6)].

Where an importer considers or has reason to believe that a product is not in conformity with … [reference to the relevant part of the legislation], he shall not place the product on the market until it has been brought into conformity. Furthermore, where the product presents a risk, the importer shall inform the manufacturer and the market surveillance authorities to that effect.

3.

Importers shall indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the product or, where that is not possible, on its packaging or in a document accompanying the product.

4.

Importers shall ensure that the product is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end-users, as determined by the Member State concerned.

5.

Importers shall ensure that, while a product is under their responsibility, storage or transport conditions do not jeopardise its compliance with the requirements set out in … [reference to the relevant part of the legislation].

6.

When deemed appropriate with regard to the risks presented by a product, importers shall, to protect the health and safety of consumers, carry out sample testing of marketed products, investigate, and, if necessary, keep a register of complaints, of non-conforming products and product recalls, and shall keep distributors informed of such monitoring.

7.

Importers who consider or have reason to believe that a product which they have placed on the market is not in conformity with the Community harmonisation legislation applicable shall immediately take the corrective measures necessary to bring that product into conformity, to withdraw it or recall it, if appropriate. Furthermore, where the product presents a risk, importers shall immediately inform the competent national authorities of the Member States in which they made the product available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

8.

Importers shall, for ... [period to be specified in proportion to the lifecycle of the product and the level of risk], keep a copy of the EC declaration of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities, upon request.

9.

Importers shall, further to a reasoned request from a competent national authority, provide it with all the information and documentation necessary to demonstrate the conformity of a product in a language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by products which they have placed on the market.

Article R5

Obligations of distributors

1.

When making a product available on the market distributors shall act with due care in relation to the requirements applicable.

2.

Before making a product available on the market distributors shall verify that the product bears the required conformity marking or markings, that it is accompanied by the required documents and by instructions and safety information in a language which can be easily understood by consumers and other end-users in the Member State in which the product is to be made available on the market, and that the manufacturer and the importer have complied with the requirements set out in Article [R2(5) and (6)] and Article [R4(3)].

Where a distributor considers or has reason to believe that a product is not in conformity with … [reference to the relevant part of the legislation], he shall not make the product available on the market until it has been brought into conformity. Furthermore, where the product presents a risk, the distributor shall inform the manufacturer or the importer to that effect as well as the market surveillance authorities.

3.

Distributors shall ensure that, while a product is under their responsibility, storage or transport conditions do not jeopardise its compliance with the requirements set out in ... [reference to the relevant part of the legislation].

4.

Distributors who consider or have reason to believe that a product which they have made available on the market is not in conformity with the Community harmonisation legislation applicable shall make sure that the corrective measures necessary to bring that product into conformity, to withdraw it or recall it, if appropriate, are taken. Furthermore, where the product presents a risk, distributors shall immediately inform the competent national authorities of the Member States in which they made the product available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.

5.

Distributors shall, further to a reasoned request from a competent national authority, provide it with all the information and documentation necessary to demonstrate the conformity of a product. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by products which they have made available on the market.

Article R6

Cases in which obligations of manufacturers apply to importers and distributors

An importer or distributor shall be considered a manufacturer for the purposes of this ... [act] and he shall be subject to the obligations of the manufacturer under Article [R2], where he places a product on the market under his name or trademark or modifies a product already placed on the market in such a way that compliance with the applicable requirements may be affected.

Article R7

Identification of economic operators

Economic operators shall, on request, identify the following to the market surveillance authorities, for ... [period to be specified in proportion to the lifecycle of the product and the level of risk]:

(a)

any economic operator who has supplied them with a product;

(b)

any economic operator to whom they have supplied a product.

Article R8

Presumption of conformity

Products which are in conformity with harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union shall be presumed to be in conformity with the requirements covered by those standards or parts thereof, set out in … [reference to the relevant part of the legislation].

Article R9

Formal objection to a harmonised standard

1.

When a Member State or the Commission considers that a harmonised standard does not entirely satisfy the requirements which it covers and which are set out in … [reference to the relevant part of the legislation], the Commission or the Member State concerned shall bring the matter before the Committee set up by Article 5 of Directive 98/34/EC, giving its arguments. The Committee shall, having consulted the relevant European standardisation bodies, deliver its opinion without delay.

2.

In the light of the Committee's opinion, the Commission shall decide to publish, not to publish, to publish with restriction, to maintain, to maintain with restriction or to withdraw the references to the harmonised standard concerned in or from the Official Journal of the European Union.

3.

The Commission shall inform the European standardisation body concerned and, if necessary, request the revision of the harmonised standards concerned.

Article R10

EC declaration of conformity

1.

The EC declaration of conformity shall state that the fulfilment of requirements specified in … [reference to relevant part of the legislation] has been demonstrated.

2.

The EC declaration of conformity shall have the model structure set out in Annex III of Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products, shall contain the elements specified in the relevant modules set out in Annex II of that Decision and shall be continuously updated. It shall be translated into the language or languages required by the Member State in which market the product is placed or made available.

3.

By drawing up the EC declaration of conformity, the manufacturer shall assume responsibility for the compliance of the product.

Article R11

General principles of the CE marking

The CE marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.

Article R12

Rules and conditions for affixing the CE marking

1.

The CE marking shall be affixed visibly, legibly and indelibly to the product or to its data plate. Where that is not possible or not warranted on account of the nature of the product, it shall be affixed to the packaging and to the accompanying documents, where the legislation concerned provides for such documents.

2.

The CE marking shall be affixed before the product is placed on the market. It may be followed by a pictogram or any other mark indicating a special risk or use.

3.

The CE marking shall be followed by the identification number of the notified body, where that body is involved in the production control phase.

The identification number of the notified body shall be affixed by the body itself or, under its instructions, by the manufacturer or his authorised representative.

4.

Member States shall build upon existing mechanisms to ensure correct application of the regime governing the CE marking and take appropriate action in the event of improper use of the marking. Member States shall also provide for penalties for infringements, which may include criminal sanctions for serious infringements. Those penalties shall be proportionate to the seriousness of the offence and constitute an effective deterrent against improper use.

Article R13

Notification

Member States shall notify the Commission and the other Member States of bodies authorised to carry out third-party conformity assessment tasks under this ... [act].

Article R14

Notifying authorities

1.

Member States shall designate a notifying authority that shall be responsible for setting up and carrying out the necessary procedures for the assessment and notification of conformity assessment bodies and the monitoring of notified bodies, including compliance with the provisions of Article [R20].

2.

Member States may decide that the assessment and monitoring referred to in paragraph 1 shall be carried out by a national accreditation body within the meaning of and in accordance with Regulation (EC) No 765/2008.

3.

Where the notifying authority delegates or otherwise entrusts the assessment, notification or monitoring referred to in paragraph 1 to a body which is not a governmental entity, that body shall be a legal entity and shall comply mutatis mutandis with the requirements laid down in Article [R15(1) to (6)]. In addition it shall have arrangements to cover liabilities arising out of its activities.

4.

The notifying authority shall take full responsibility for the tasks performed by the body referred to in paragraph 3.

Article R15

Requirements relating to notifying authorities

1.

A notifying authority shall be established in such a way that no conflict of interest with conformity assessment bodies occurs.

2.

A notifying authority shall be organised and operated so as to safeguard the objectivity and impartiality of its activities.

3.

A notifying authority shall be organised in such a way that each decision relating to notification of a conformity assessment body is taken by competent persons different from those who carried out the assessment.

4.

A notifying authority shall not offer or provide any activities that conformity assessment bodies perform or consultancy services on a commercial or competitive basis.

5.

A notifying authority shall safeguard the confidentiality of the information it obtains.

6.

A notifying authority shall have a sufficient number of competent personnel at its disposal for the proper performance of its tasks.

Article R16

Information obligation on notifying authorities

Member States shall inform the Commission of their procedures for the assessment and notification of conformity assessment bodies and the monitoring of notified bodies, and of any changes thereto.

The Commission shall make that information publicly available.

Article R17

Requirements relating to notified bodies

1.

For the purposes of notification, a conformity assessment body shall meet the requirements laid down in paragraphs 2 to 11.

2.

A conformity assessment body shall be established under national law and have legal personality.

3.

A conformity assessment body shall be a third-party body independent of the organisation or the product it assesses.

A body belonging to a business association or professional federation representing undertakings involved in the design, manufacturing, provision, assembly, use or maintenance of products which it assesses, may, on condition that its independence and the absence of any conflict of interest are demonstrated, be considered such a body.

4.

A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment tasks shall not be the designer, manufacturer, supplier, installer, purchaser, owner, user or maintainer of the products which they assess, nor the authorised representative of any of those parties. This shall not preclude the use of assessed products that are necessary for the operations of the conformity assessment body or the use of such products for personal purposes.

A conformity assessment body, its top level management and the personnel responsible for carrying out the conformity assessment tasks shall not be directly involved in the design, manufacture or construction, the marketing, installation, use or maintenance of those products, or represent the parties engaged in those activities. They shall not engage in any activity that may conflict with their independence of judgement or integrity in relation to conformity assessment activities for which they are notified. This shall in particular apply to consultancy services.

Conformity assessment bodies shall ensure that the activities of their subsidiaries or subcontractors do not affect the confidentiality, objectivity or impartiality of their conformity assessment activities.

5.

Conformity assessment bodies and their personnel shall carry out the conformity assessment activities with the highest degree of professional integrity and the requisite technical competence in the specific field and shall be free from all pressures and inducements, particularly financial, which might influence their judgement or the results of their conformity assessment activities, especially as regards persons or groups of persons with an interest in the results of those activities.

6.

A conformity assessment body shall be capable of carrying out all the conformity assessment tasks assigned to it by … [reference to relevant part of the legislation] and in relation to which it has been notified, whether those tasks are carried out by the conformity assessment body itself or on its behalf and under its responsibility.

This article is long: the rest is at the official publication.