The percentages in this Annex, first and second parts, are expressed in weight/weight (w/w) and are calculated in relation to the quantity of anhydrous uncoated regenerated cellulose film.
The usual technical denominations are given in square brackets.
The substances used shall be of good technical quality as regards the purity criteria.
Denominations | Restrictions
A. Regenerated cellulose
Not less than 72 % (w/w)
B. Additives
Softeners
Not more than 27 % (w/w) in total
Bis (2-hydroxyethyl) ether [= diethyleneglycol]
Only for films intended to be coated and then used for foodstuffs which are not moist, namely which do not contain water which is physically free at the surface. The total amount of bis(2-hydroxyethyl)ether and ethanediol present in foodstuffs that have been in contact with film of this type may not exceed 30 mg/kg of the foodstuff.
Ethanediol [= monoethyleneglycol]
1,3-butanediol
Glycerol
1,2-propanediol [= 1,2 propyleneglycol]
Polyethylene oxide [= polyethyleneglycol]
Average molecular weight between 250 and 1200.
1,2-polypropylene oxide [= 1,2 polypropyleneglycol]
Average molecular weight not greater than 400 and free 1,3-propanediol content not greater than 1 % (w/w) in substance.
Sorbitol
Tetraethyleneglycol
Triethyleneglycol
Urea
Other additives
Not more than 1 % (w/w) in total.
First class | The quantity of the substance or group of substances in each indent may not exceed 2 mg/dm2 of the uncoated film.
Acetic acid and its NH4, Ca, Mg, K and Na salts
Ascorbic acid and its NH4, Ca, Mg, K and Na salts
Benzoic acid and sodium benzoate
Formic acid and its NH4, Ca, Mg, K and Na salts
Linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and also behenic and ricinoleic acids and the NH4, Ca, Mg, K, Na, Al, Zn salts of these acids
Citric, d- and l-lactic, maleic, l-tartaric acids and their Na and K salts
Sorbic acid and its NH4, Ca, Mg, K and Na salts
Amides of linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and also the amides of behenic and ricinoleic acids
Natural edible starches and flours
Edible starches and flours modified by chemical treatment
Amylose
Calcium and magnesium carbonates and chlorides
Esters of glycerol with linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and/or with adipic, citric, 12-hydroxystearic (oxystearin), ricinoleic acids
Esters of polyoxyethylene (8 to 14 oxyethylene groups) with linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive
Esters of sorbitol with linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive
Mono-and/or di-esters of stearic acid with ethanediol and/or bis (2-hydroxyethyl) ether and/or triethylene glycol
Oxides and hydroxides of aluminium, calcium, magnesium and silicon and silicates and hydrated silicates of aluminium, calcium, magnesium and potassium
Polyethylene oxide [= polyethyleneglycol]
Average molecular weight between 1200 and 4000.
Sodium propionate
Second class | The total quantity of the substances may not exceed 1 mg/dm2 of the uncoated film and the quantity of the substance or group of substances in each indent may not exceed 0,2 mg/dm2 (or a lower limit where one is specified) of the uncoated film.
Sodium alkyl (C8-C18) benzene sulphonate
Sodium isopropyl naphthalene sulphonate
Sodium alkyl (C8-C18) sulphate
Sodium alkyl (C8-C18) sulphonate
Sodium dioctylsulphosuccinate
Distearate of dihydroxyethyl diethylene triamine monoacetate
Not more than 0,05 mg/dm2 of the uncoated film.
Ammonium, magnesium and potassium lauryl sulphates
N,N′-distearoyl diaminoethane, N,N′-dipalmitoyl diaminoethane and N,N′-dioleoyl diaminoethane
2-heptadecyl-4,4-bis(methylene-stearate) oxazoline
Polyethylene-aminostearamide ethylsulphate
Not more than 0,1 mg/dm2 of the uncoated film.
Third class — Anchoring agent | The total quantity of substances may not exceed 1 mg/dm2 of the uncoated film.
Condensation product of melamine-formaldehyde unmodified, or which may be modified with one or more of the following products:
butanol, diethylenetriamine, ethanol, triethylenetetramine, tetraethylenepentamine, tri-(2-hydroxyethyl) amine, 3,3′-diaminodipropylamine, 4,4′-diaminodibutylamine
Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated film.
Free melamine content not greater than 0,3 mg/dm2 of the uncoated film.
Condensation product of melamine-urea-formaldehyde modified with tris-(2-hydroxyethyl)amine
Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated film.
Free melamine content not greater than 0,3 mg/dm2 of the uncoated film.
Cross-linked cationic polyalkyleneamines:
polyamide-epichlorhydrin resin based on diaminopropylmethylamine and epichlorhydrin;
polyamide-epichlorhydrin resin based on epichlorhydrin, adipic acid, caprolactam, diethylenetriamine and/or ethylenediamine;
polyamide-epichlorhydrin resin based on adipic acid, diethylenetriamine and epichlorhydrin, or a mixture of epichlorhydrin and ammonia;
polyamide-polyamine-epichlorhydrin resin based on epichlorhydrin, dimethyl adipate and diethylenetriamine;
polyamide-polyamine-epichlorhydrin resin based on epichlorhydrin, adipamide and diaminopropylmethylamine
In accordance with Community directives and in their absence, with national legislation, pending the adoption of Community directives.
Polyethyleneamines and polyethyleneimines
Not more than 0,75 mg/dm2 of the uncoated film.
Condensation product of urea-formaldehyde unmodified, or which may be modified with one or of the following products:
aminomethylsulphonic acid, sulphanilic acid, butanol, diaminobutane, diaminodiethylamine, diaminodipropylamine, diaminopropane, diethylenetriamine, ethanol, guanidine, methanol, tetraethylenepentamine, triethylenetetramine, sodium sulphite
Free formaldehyde content not greater than 0,5 mg/dm2 of the uncoated film.
Fourth class | The total quantity of substances may not exceed 0,01 mg/dm2 of the uncoated film.
Products resulting from the reaction of the amines of edible oils with polyethylene oxide
Monoethanolamine lauryl sulphate
Denominations | Restrictions
A. Regenerated cellulose
See first part.
B. Additives
See first part.
C. Coating
Polymers
The total quantity of substances may not exceed 50 mg/dm2 of the coating on the side in contact with foodstuffs.
Ethyl, hydroxyethyl, hydroxypropyl and methyl ethers of cellulose
Cellulose nitrate
Not more than 20 mg/dm2 of the coating on the side in contact with foodstuffs; nitrogen content between 10,8 % (w/w) and 12,2 % (w/w) in the cellulose nitrate.
Resins
The total quantity of substances may not exceed 12,5 mg/dm2 of the coating on the side in contact with foodstuffs and solely for the preparation of regenerated cellulose films with cellulose nitrate based coatings.
Casein
Colophony and/or its products of polymerization, hydrogenation, or disproportionation and their esters of methyl, ethyl or C2 to C6 polyvalent alcohols, or mixtures of these alcohols
Colophony and/or its products of polymerization, hydrogenation, or disproportionation condensed with acrylic, maleic, citric, fumaric and/or phthalic acids and/or 2,2 bis (4-hydroxyphenyl) propane formaldehyde and esterified with methyl ethyl or C2 to C6 polyvalent alcohols or mixtures of these alcohols
Esters derived from bis(2-hydroxyethyl) ether with addition products of betapinene and/or dipentene and/or diterpene and maleic anhydride
Edible gelatine
Castor oil and its products of dehydration or hydrogenation and its condensation products with polyglycerol, adipic, citric, maleic, phthalic and sebacic acids
Natural gum [= damar]
Poly-beta-pinene [= terpenic resins]
Urea-formaldehyde resins (see anchoring agents)
Plasticisers
The total quantity of substances may not exceed 6 mg/dm2 of the coating on the side in contact with foodstuffs.
Acetyl tributyl citrate
Acetyl tri(2-ethylhexyl) citrate
Di-isobutyl adipate
Di-n-butyl adipate
Di-n-hexyl azelate
Dicyclohexyl phthalate
Not more than 4,0 mg/dm2 of the coating on the side in contact with foodstuffs.
2-ethylhexyl diphenyl phosphate (synonym: phosphoric acid diphenyl 2 ethylhexyl ester)
The amount of 2-ethylhexyl diphenyl phosphate shall not exceed:
2,4 mg/kg of the foodstuff in contact with this type of film; or
0,4 mg/dm2 in the coating on the side in contact with foodstuffs.
Glycerol monoacetate [= monoacetin]
Glycerol diacetate [= diacetin]
Glycerol triacetate [= triacetin]
Di-butyl sebacate
Di-n-butyl tartrate
Di-isobutyl tartrate
Other additives
The total quantity of substances may not exceed 6 mg/dm2 in the uncoated regenerated cellulose film, inclusive of the coating on the side in contact with foodstuffs.
4.1. Additives listed in the first part
Same restrictions as in the first part (however the quantities in mg/dm2 refer to the uncoated regenerated cellulose film, inclusive of the coating on the side in contact with foodstuffs).
4.2. Specific coating additives
The quantity of the substance or group of substances in each indent may not exceed 2 mg/dm2 (or a lower limit where one is specified) of the coating on the side in contact with foodstuffs.
1-hexadecanol and 1-octadecanol
Esters of linear fatty acids, saturated or unsaturated, with an even number of carbon atoms from 8 to 20 inclusive and of ricinoleic acid with ethyl, butyl, amyl and oleyl linear alcohols
Montan waxes, comprising purified montanic (C26 to C32) acids and/or their esters with ethanediol and/or 1,3 butanediol and/or their calcium and potassium salts
Carnauba wax
Beeswax
Esparto wax
Candelilla wax
Dimethylpolysiloxane
Not more than 1 mg/dm2 of the coating on the side in contact with foodstuffs.
Epoxidised soya-bean oil (oxirane content 6 to 8 %)
Refined paraffin and microcrystalline waxes
Pentaerythritol tetrastearate
Mono and bis(octadecyldiethyleneoxide)-phosphates
Not more than 0,2 mg/dm2 of the coating on the side in contact with foodstuffs.
Aliphatic acids (C8 to C20) esterified with mono- or di-(2-hydroxyethyl)amine
2- and 3-tert.butyl-4-hydroxyanisole [= butylated hydroxyanisole — BHA]
Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs.
2,6-di-tert.butyl-4-methylphenol [= butylated hydroxytoluene — BHT]
Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs.
Di-n-octyltin-bis(2-ethylhexyl) maleate
Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs.
Solvents
The total quantity of substances may not exceed 0,6 mg/dm2 of the coating on the side in contact with foodstuffs.
Butyl acetate
Ethyl acetate
Isobutyl acetate
Isopropyl acetate
Propyl acetate
Acetone
1-butanol
Ethanol
2-butanol
2-propanol
1-propanol
Cyclohexane
Ethyleneglycol monobutyl ether
Ethyleneglycol monobutyl ether acetate
Methyl ethyl ketone
Methyl isobutyl ketone
Tetrahydrofuran
Toluene
Not more than 0,06 mg/dm2 of the coating on the side in contact with foodstuffs.