Name of installation: | Declaration date:
Declaration No: | Reporting period:
NB: All transfers of conditioned waste should be grouped by type of waste (prior to conditioning and after conditioning) and by previous location
Entry (2) | Ref. (3) | Waste type prior to conditioning (4) | Conditioned form (5) | Number of items (6) | Quantity (7) | Previous location (8) | New location (9)
Pu | HEU | U-233
Date and place of dispatch of report:
Name and position of signatory:
Signature:
Annual report to declare any changes in location of wastes covered by point (c) of Article 32 that occurred during the preceding calendar year. A separate entry is required for each change of location during the year.
‘Entry’ in each declaration should be numbered sequentially, beginning with ‘1’.
The ‘Ref.’ column should be used to refer in the current entry to another entry. The contents of the ‘Ref.’ column consist of the relevant declaration and entry numbers (e.g. 10—20 provides a reference to entry 20 of declaration 10). The reference indicates that the current entry adds to or updates information in another entry earlier declared. Several references may be reported, if necessary.
The ‘Waste type prior to conditioning’ column should show the type of waste before any conditioning took place, e.g. hulls, feed clarification sludge, high active liquid, or intermediate active liquid.
The ‘Conditioned form’ column should show the current conditioned form of the waste, e.g. glass, ceramic, cement or bitumen.
The ‘Number of items’ column should show the number of items, e.g. glass canisters or cement blocks, to be involved in a single processing campaign or the number of items moved during the year from the same originating (‘previous’) location to the same new location.
The ‘Quantity’ column should include (if available) the total amount, in grams, of plutonium, high enriched uranium or uranium-233 contained in the items entered in the ‘Number of Items’ column. The ‘Quantity’ column may be based on the quantity data used in the inventory change reports, e.g. the average quantity of nuclear material per item, and does not require a measurement of each item.
The ‘Previous location’ column should indicate the location of the waste before the change in location (see also explanatory note no 8 for Annex XII).
The ‘New location’ column should indicate the location after the change (see also explanatory note no 8 for Annex XII).
NB: Under Article 79 of the Treaty, those subject to safeguards requirements shall notify the authorities of the Member State concerned of any communications they make to the Commission pursuant to Article 78 and the first paragraph of Article 79 of the Treaty.
This form, duly completed and signed, must be forwarded to the European Commission, Euratom Safeguards, L-2920 Luxembourg.