Where standards, guidelines, or recommendations pertaining to the conduct of audits are adopted by one of the relevant international standard-setting organisations, the Parties will review the contents of this Annex, and make any appropriate modifications.
General Provisions
Definitions
The following definitions shall apply to terms used in this Annex:
1.1. audit — assessment of performance;
1.2. auditee — the exporting Party whose enforcement and control programme is the subject of the audit;
1.3. auditor — the importing Party that conducts the audit;
1.4. establishment — processing plant for animals or animal products;
1.5. facility — site other than processing plants where animals or animal products might be handled, excluding retail premises;
1.6. animal health investigation — a site visit undertaken to gather or verify information related to the status or conditions of a particular region with regard to one or more of the animal diseases identified in Annex III.
General principles
2.1. The auditor and the auditee should cooperate in carrying out audits in accordance with the provisions set out in this Annex. The audit team should include representatives of both the auditor and the auditee, and the auditee should designate personnel responsible for facilitating the audit. Specialised professional skills may be necessary to carry out audits of specialised systems and programmes.
Information is collected through interviews, review of documents and records, and site visits. Changes to controls since the adoption of the Agreement or since the previous audit are included. Information may be verified through inquiries and checks on other sources; these may include physical observation, measurements, samples and records. Information obtained during the course of the audit should be documented.
2.2. Audits should be designed to check the effectiveness of the auditee's enforcement and control programme rather than to reject individual animals, consignments of food or establishments. The auditee's enforcement and control programme covered by the Agreement should be adequately assessed.
2.2.1. The basis for the assessment of all audits conducted in accordance with the Agreement is provided by the standards of either the exporting party, or a combination of the standards of the exporting party and importing party, and any special conditions as appropriate for the particular audit. Such standards and appropriate special conditions are outlined in Annex V, and provided for in Article 6.
2.2.2. It is recognised that on-site audits undertaken in the process of determining initial equivalence will normally be conducted using only the standards of the exporting country, whereas subsequent on-site audits undertaken for the purpose of verifying delivery of a previously established condition of equivalence will be conducted using the standards of the exporting party, those relevant standards of the importing party that have not been determined to be equivalent and for which compliance is required, and any agreed special conditions outlined in Annex V.
2.3. The auditee must operate a documented programme to demonstrate to the auditor that standards are being met on a consistent basis.
2.4. The frequency of audits should be based on the performance of the exporting Party in carrying out its enforcement and control programme. A low level of performance should result in an increased frequency of audit, for example to ensure that unsatisfactory performance has been corrected.
2.4.1. Information to be used in establishing the frequency of audits may include, inter alia :
epidemiological analysis,
the results of previous audits,
results from veterinary checks at the border (including results from collection and analysis of samples from import consignments),
period since last audit,
volume of trade,
public health surveillance results,
animal disease list freedom,
and environmental and geographical factors.
2.5. Audits, and the decisions based on them, should be made in a transparent and consistent manner.
The auditor should:
2.5.1. Ensure that audit conclusions are based on objective evidence or data and observations, which can be verified as accurate and reliable;
2.5.2. Remain free of any conflicting interest or improper influence;
2.5.3. Ensure that the audit procedure is conducted with the objectives of
verifying that previously recognised conditions of equivalence are being delivered by the exporting party, and
identifying to the auditee areas where improvements can be introduced to enhance the performance of the auditee's documented control programme so that it can deliver initially, or continue to deliver, a condition of equivalence necessary to meet the importing party's appropriate level of protection;
verifying that previously recognised conditions of equivalence are being delivered by the exporting party, and
identifying to the auditee areas where improvements can be introduced to enhance the performance of the auditee's documented control programme so that it can deliver initially, or continue to deliver, a condition of equivalence necessary to meet the importing party's appropriate level of protection;
2.5.4. Ensure that all documents and records received during the audit are retained and safeguarded as agreed by both parties and according to each party's applicable laws and regulations;
2.5.5. Ensure that commercial confidentiality is respected according to each party’s applicable laws and regulations.
The auditee should:
2.5.6. Provide information within the scope of the audit, which is requested by the auditor, in a timely manner during the audit or within 20 working days thereafter to ensure that the audit objectives can be met;
2.5.7. Cooperate with and assist the auditor in the performance of his/her duties so that the audit objectives are achieved. This includes:
informing personnel involved in the audit about its objectives;
appointing suitably qualified members of staff to accompany the audit team,
providing the necessary facilities needed for the audit team in order to ensure an effective and efficient audit process,
providing access to the sites and to documents necessary to carry out the audit, as requested by the auditor.
informing personnel involved in the audit about its objectives;
appointing suitably qualified members of staff to accompany the audit team,
providing the necessary facilities needed for the audit team in order to ensure an effective and efficient audit process,
providing access to the sites and to documents necessary to carry out the audit, as requested by the auditor.
2.6. Animal health investigations
Animal health investigations are conducted in order to gather appropriate epidemiological and other information concerning the disease status of a particular region (whether a Member State/State, part of a Member State/State or parts of more than one Member State/State). An animal health investigation may be carried out by one party (referred to here as the importing party) to support the initial determination made by the other party (referred to here as the exporting party) of the disease status of a region (i.e. first-time recognition of freedom from a specified disease), or following a disease outbreak.
OPERATIONAL GUIDELINES
Preparing for audits
Advance preparation
3.1. Programming of audits
In order to ensure that audits can be adequately prepared and carried out in the most efficient manner, the Parties should:
establish a tentative audit programme covering, where practicable, a 12-month period, taking due account of, inter alia, the analysis described under 2.4 of Annex VI to the Agreement, and the actions set out in Annex V of the Agreement; this indicative programme should be reviewed on a six-monthly basis in order to establish a rolling audit programme,
confirm, at the earliest stage possible, preferably 60 days prior, the intention to carry out the audits foreseen in the indicative programme,
notify, at the earliest stage possible, the auditee of any anticipated changes to the indicative programme,
exchange information on programmes of audits foreseen to be carried out outside the scope of the Agreement as might be necessary and appropriate to facilitate the provisions of paragraph 6.3.
3.2. Audit initiation
The following will normally provide a basis for the initiation of audits:
audits identified in the indicative programme,
audits upon invitation by the auditee,
audits at the justified request of either contracting party to the Agreement, such as audits undertaken in the event of serious concerns by either Party regarding emerging or newly identified risks to public or animal health.
In all cases, the auditor should provide the auditee with sufficient notice of the intended audit, in order to enable it to make the arrangements necessary for a satisfactory completion of the audit. The advance time of this notice should reflect the urgency related to public and animal health associated with its performance.
Communication by the auditor to the auditee
3.3. Pre-audit activities
3.3.1. Preparation of the audit plan
In consultation with the auditee, the auditor should prepare an audit plan. The audit plan should be submitted by the auditor to the auditee sufficiently in advance of the audit to allow time for information to be supplied by the auditee, preferably 60 days prior to the intended commencement date of the audit. The audit should be designed to be flexible in order to permit changes in emphasis based on information gathered prior to, or during the audit.
The plan should include:
the subject, depth and scope of the audit,
the objectives of the audit,
identification of the relevant standards set out in Annex V against which the audit will be carried out. Specifically, these are the standards of the exporting party when the audit is conducted as the initial on-site evaluation of performance of the auditee's control programme as part of the determination as to whether a condition of equivalence exists, or a combination of the exporting party's standards and the importing party's standards, as amended by the appropriate special conditions set out in Annex V, when a subsequent audit is conducted to verify a previously determined condition of equivalence,
the date and place of the audit, and the types of any establishments or facilities to be visited so that appropriate audit team members may be chosen,
a timetable up to and including the presentation of the final report,
the language or languages in which the audit will be conducted and the report written,
the identity of the members of the audit team, including the leader,
a schedule of meetings with officials and visits to establishments or facilities, including unannounced visits, as appropriate,
provisions for respect of commercial confidentiality and avoidance of conflicts of interest.
3.3.2. Agreement with the auditee of the plan and dates
If the auditee objects to any provisions detailed in the audit plan, such objections are to be made known immediately to the auditor, usually within 10 working days after receipt of the audit plan. Objections should be resolved between the auditor and the auditee. Proposed amendment(s) to the audit plan, as a consequence of information obtained either prior to or during the audit, should be communicated by the proposing party to the other party as soon as practicable.
3.3.3. Obtaining the necessary documentation from the auditee
Prior to the audit, the auditor may request documentation from the auditee that is relevant to its preparation and execution. Such documentation may include, for example:
legislation and relevant technical standards and specifications,
management structure of the auditee,
regulatory functions and powers of the auditee, and results of any enforcement actions,
approval procedures operated by auditee,
details concerning control programmes, including copies of working documents, manuals and similar operational guides.
The auditor may request clarification from the auditee concerning any documentation that has been submitted.
Conducting the audit
Opening meeting
The auditee and auditor should have an opening meeting at a site agreed to in advance by both sides. Where necessary and appropriate to clarify issues pertaining to the audit, the opening meeting may be held in Washington, D.C. for audits conducted by European Commission teams, or in either Brussels, Belgium or Grange, Ireland for audits conducted by US teams. In other cases, opening meetings may be held at appropriate sites, such as EU Member State capitals or US cities, as may be practical and convenient for the particular audit. Wherever the opening meeting takes place, it should be chaired by an appropriate representative of the auditee's competent authority(ies). The purpose of an opening meeting is to:
introduce the audit team to the auditee,
confirm the subject, depth, scope, audit standards and objectives of the audit,
outline the working methods and procedures to be used during the audit,
confirm the official communication links between the audit team and the auditee during the course of the audit, including establishing which representatives of the official services will accompany the audit team at each visit,
confirm the government and non-government sites to be visited,
confirm the appropriate number and roles of audit team members to participate in or observe site visits to production establishments or facilities,
confirm the time, date and location of the closing meeting and any interim meetings with the auditee,
confirm travel and accommodation arrangements,
confirm that the resources and facilities needed by the audit team will be made available,
confirm the reporting methods to be used,
request any additional documentation identified during the pre-audit stage as necessary for the conduct of the audit,
answer any questions the auditee has concerning the audit process.
Document review
5.1. The document review may include, for example, the following:
records concerning compliance programmes,
inspection and internal audit reports,
documentation concerning corrective actions and sanctions,
records of compliance actions taken,
sampling plans and their results,
documents associated with verification,
regulatory procedures followed by the auditee.
5.2. In the case of an audit that is subsequent to a determination of equivalence, the document review may also consist of a review of relevant changes to the inspection and certification systems since the determination of equivalence or since the previous audit.
5.3. The auditee will cooperate fully with the auditor in the document review process and help to ensure that the auditor has access to requested documents and records.
On-site verification
6.1. The decision by the auditor as to the nature and extent of on-site verifications should take into account factors such as the area concerned, the history of conformity with requirements by the sector or exporting country as determined by prior audits and/or veterinary checks at the border (including results of sampling and analysis of import consignments), the volume of product produced and imported or exported, changes to the infrastructure and the nature and operation of the national inspection and certification systems.
6.2. On-site verification may involve visits to production and manufacturing establishments, facilities, food handling or storage areas and control laboratories to check the accuracy of the information contained in the documentary material referred to in 5.1.
6.3. When checks of establishments or facilities are carried out, the auditee will carry out the check of the establishment or facility, following the auditee’s usual procedures, and the auditor will generally participate as an observer, though the auditor is free to check other aspects of performance, if deemed necessary. Due to time constraints, the auditor may elect not to observe a full, comprehensive inspection by the auditee, but may, instead, verify particular inspection practices through off-site interviews with the auditee’s inspection staff.
6.4. The auditee will cooperate fully with the auditor in the on-site verification process and facilitate the auditor's entry into the establishments and facilities that are the subject of the on-site verification.
6.5. Where on-the-spot checks reveal a serious potential or actual risk to human or animal health, the auditor should immediately inform the auditee of such an assessment, who should take appropriate action to correct an identified and confirmed risk.
Follow-up audit
A follow-up audit may be conducted to verify the correction of deficiencies identified in a prior audit.
Working documents
Working documents may include checklists of elements to evaluate, such as the following:
legislation,
structure and operations of inspection and certification services,
establishment and facility structure, layout, operations and working procedures,
health statistics, sampling plans and results,
compliance action and procedures,
reporting and complaint procedures,
training programmes.
8.1. Support documents
Documents supporting audit findings, conclusions and recommendations should be standardised as much as possible in order to make the performance of the audit and the presentation of its findings uniform, transparent and reliable. The support documents may include any aides memoire or other background information of elements to evaluate.
Closing meeting
As with the opening meeting, the closing meeting may be held at a site that is mutually convenient to both the auditee and the auditor. The closing meeting should also be chaired by an appropriate representative of the auditee's competent authority(ies).
The purpose of the closing meeting is to:
re-confirm the subject, depth, scope, audit standards and objectives of the audit,
remind the auditee that the audit is based on a sampling of the system controls and does not purport to reflect all of the system deficiencies,
provide the auditee with the auditor’s preliminary findings and/or a general overview of the auditor’s findings,
present details of the substantive deficiencies identified along with the objective evidence for such deficiencies,
offer any additional explanation necessary to ensure that the auditee understands the nature of the substantive deficiencies,
confirm that full details of the audit will be provided in the form of an audit report and that the auditee will have an opportunity to comment on the report,
allow the auditee to comment on the audit findings or to raise any points of clarification.
Post-audit activities
Audit report
The audit report should provide a balanced picture of the audit findings, and include conclusions and recommendations that accurately reflect these findings. It should normally cover the following:
the subject, depth, scope, audit standards and objectives of the audit,
details of the audit plan,
identification of the reference documents against which the audit was conducted,
auditor evaluation of findings against the standards subject of the audit,
area(s) of disagreement between the auditor and auditee,
the auditor's recommendations as to which substantive deficiencies should be corrected,
the response to the presentation of the findings including any undertakings given to address identified deficiencies.
10.1. Commercial confidentiality must be respected in the preparation and subsequent distribution of the audit report. Prior to the audit, each party will inform the other of its laws and procedures for protecting confidential commercial information and other information that may be deemed sensitive by one or both parties. Each party will respect fully its own requirements for protecting confidential information. Where significant differences exist between the parties in the nature of information that must be protected, the parties will identify these differences prior to the audit and agree on the appropriate procedures to be followed.
10.2. Draft reports are to be sent to the auditee within the time limits specified in the Agreement. The auditee may comment within 60 days, and should describe any specific corrective actions that will be or have been taken in order to deliver equivalence initially, or to continue to deliver equivalence, including target dates for completion.
10.3. Amendments to the text of the final report in response to comments from the competent authority should be limited to the correction of factual inaccuracies. However, other comments made by the auditee may be indicated separately in the report if they serve to clarify the report’s contents. The auditee’s comments should, in any case, be attached to the final report.
Corrective action follow up
Verification of corrective action necessary to deliver equivalence will vary according to the nature of the original deficiency. Verification of corrective action by the auditee may include the following:
review of assurances provided by the auditee,
review of documentation provided by the auditee,
follow up audits,
review of stated corrective action in a subsequent audit.
The follow up audit process is similar to the normal audit, but it would focus on confirming that the action taken by the auditee satisfactorily addresses and resolves the identified deficiencies. A follow up report concerning the corrective action should be prepared and distributed in a manner similar to the original audit report.
Animal health investigations
Animal health investigations
12.1. General principles
All parties involved in an animal health investigation should cooperate in carrying out the investigation in an open and transparent manner, with a view to completing all necessary procedures as quickly as possible.
12.2. Procedures
12.2.1. Programming of animal health investigation and animal health investigation initiation
In most cases, this investigation will be undertaken at the request of the exporting party. The results of an animal health investigation should provide essential information regarding disease risk associated with exports of specified commodities from that region. The importing party shall acknowledge such a request in a timely manner, and shall identify a contact person to work closely with representatives of the exporting party. Necessary site visits will be scheduled expeditiously with the input of all parties.