32 PROTOCOL 4, Decision_act (EU) 2005/40

In forcesince 13 Dec 2004

concerning the definition of the concept of originating products and methods of administrative cooperation

TABLE OF CONTENTS

TITLE I — GENERAL PROVISIONS

–

Article 1: | Definitions

TITLE II — DEFINITION OF THE CONCEPT OF “ORIGINATING PRODUCTS”

–

Article 2: | General requirements

–

Article 3: | Bilateral cumulation in the Community

–

Article 4: | Bilateral cumulation in Croatia

–

Article 5: | Wholly obtained products

–

Article 6: | Sufficiently worked or processed products

–

Article 7: | Insufficient working or processing operations

–

Article 8: | Unit of qualification

–

Article 9: | Accessories, spare parts and tools

–

Article 10: | Sets

–

Article 11: | Neutral elements

TITLE III — TERRITORIAL REQUIREMENTS

–

Article 12: | Principle of territoriality

–

Article 13: | Direct transport

–

Article 14: | Exhibitions

TITLE IV — DRAWBACK OR EXEMPTION

–

Article 15: | Prohibition of drawback of, or exemption from, customs duties

TITLE V — PROOF OF ORIGIN

–

Article 16: | General requirements

–

Article 17: | Procedure for the issue of a movement certificate EUR.1

–

Article 18: | Movement certificates EUR.1 issued retrospectively

–

Article 19: | Issue of a duplicate movement certificate EUR.1

–

Article 20: | Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

–

Article 21: | Conditions for making out an invoice declaration

–

Article 22: | Approved exporter

–

Article 23: | Validity of proof of origin

–

Article 24: | Submission of proof of origin

–

Article 25: | Importation by instalments

–

Article 26: | Exemptions from proof of origin

–

Article 27: | Supporting documents

–

Article 28: | Preservation of proof of origin and supporting documents

–

Article 29: | Discrepancies and formal errors

–

Article 30: | Amounts expressed in euro

TITLE VI — ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

–

Article 31: | Mutual assistance

–

Article 32: | Verification of proofs of origin

–

Article 33: | Dispute settlement

–

Article 34: | Penalties

–

Article 35: | Free zones

TITLE VII — CEUTA AND MELILLA

–

Article 36: | Application of the Protocol

–

Article 37: | Special conditions

TITLE VIII — FINAL PROVISIONS

–

Article 38: | Amendments to the Protocol

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Protocol:

(a)

“manufacture” means any kind of working or processing including assembly or specific operations;

(b)

“material” means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)

“product” means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)

“goods” means both materials and products;

(e)

“customs value” means the value as determined in accordance with the 1994 Agreement on implementation of Article VII of the General Agreement on Tariffs and Trade (WTO Agreement on customs valuation);

(f)

“ex-works price” means the price paid for the product ex works to the manufacturer in the Community or in Croatia in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)

“value of materials” means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the Community or in Croatia;

(h)

“value of originating materials” means the value of such materials as defined in subparagraph(g) applied mutatis mutandis;

(i)

“added value” shall be taken to be the ex-works price minus the customs value of each of the materials incorporated which originate in the other Contracting Party or, where the customs value is not known or cannot be ascertained, the first ascertainable price for the materials in the Community or Croatia;

(j)

“chapters” and “headings” mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonised Commodity Description and Coding System, referred to in this Protocol as “the Harmonised System” or “HS”;

(k)

“classified” refers to the classification of a product or material under a particular heading;

(l)

“consignment” means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)

“territories” includes territorial waters.

TITLE II

DEFINITION OF THE CONCEPT OF “ORIGINATING PRODUCTS”

Article 2

General requirements

1.

For the purpose of implementing this Agreement, the following products shall be considered as originating in the Community:

(a)

products wholly obtained in the Community within the meaning of Article 5 of this Protocol;

(b)

products obtained in the Community incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the Community within the meaning of Article 6 of this Protocol;

2.

For the purpose of implementing this Agreement, the following products shall be considered as originating in Croatia:

(a)

products wholly obtained in Croatia within the meaning of Article 5 of this Protocol;

(b)

products obtained in Croatia incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Croatia within the meaning of Article 6 of this Protocol.

Article 3

Bilateral cumulation in the Community

Materials originating in Croatia shall be considered as materials originating in the Community when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond the operations referred to in Article 7(1).

Article 4

Bilateral cumulation in Croatia

Materials originating in the Community shall be considered as materials originating in Croatia when incorporated into a product obtained there. It shall not be necessary that such materials have undergone sufficient working or processing, provided they have undergone working or processing going beyond the operations referred to in Article 7(1).

Article 5

Wholly obtained products

1.

The following shall be considered as wholly obtained in the Community or in Croatia:

(a)

mineral products extracted from their soil or from their seabed;

(b)

vegetable products harvested there;

(c)

live animals born and raised there;

(d)

products from live animals raised there;

(e)

products obtained by hunting or fishing conducted there;

(f)

products of sea fishing and other products taken from the sea outside the territorial waters of the Community or Croatia by their vessels;

(g)

products made aboard their factory ships exclusively from products referred to in subparagraph (f);

(h)

used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(i)

waste and scrap resulting from manufacturing operations conducted there;

(j)

products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k)

goods produced there exclusively from the products specified in subparagraphs (a) to (j).

2.

The terms “their vessels” and “their factory ships” in paragraph 1(f) and (g) shall apply only to vessels and factory ships:

(a)

which are registered or recorded in a Member State or in Croatia;

(b)

which sail under the flag of a Member State or of Croatia;

(c)

which are owned to an extent of at least 50 per cent by nationals of Member States or of Croatia, or by a company with its head office in one of these States, of which the manager or managers, Chairman of the Board of Directors or the Supervisory Board, and the majority of the members of such boards are nationals of Member States or of Croatia and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States;

(d)

of which the master and officers are nationals of Member States or Croatia;

and

(e)

of which at least 75 per cent of the crew are nationals of Member States or Croatia.

Article 6

Sufficiently worked or processed products

1.

For the purposes of Article 2, products which are not wholly obtained are considered to be sufficiently worked or processed when the conditions set out in the list in Annex II are fulfilled.

The conditions referred to above indicate, for all products covered by this Agreement, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. Accordingly, it follows that if a product, which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2.

Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in the list, should not be used in the manufacture of a product may nevertheless be used, provided that:

(a)

their total value does not exceed 10 per cent of the ex-works price of the product;

(b)

any of the percentages given in the list for the maximum value of non-originating materials are not exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.

3.

Paragraphs 1 and 2 shall apply except as provided in Article 7.

Article 7

Insufficient working or processing operations

1.

Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 6 are satisfied:

(a)

preserving operations to ensure that the products remain in good condition during transport and storage;

(b)

breaking-up and assembly of packages;

(c)

washing, cleaning; removal of dust, oxide, oil, paint or other coverings;

(d)

ironing or pressing of textiles;

(e)

simple painting and polishing operations;

(f)

husking, partial or total bleaching, polishing, and glazing of cereals and rice;

(g)

operations to colour sugar or form sugar lumps;

(h)

peeling, stoning and shelling, of fruits, nuts and vegetables;

(i)

sharpening, simple grinding or simple cutting;

(j)

sifting, screening, sorting, classifying, grading, matching; (including the making-up of sets of articles);

(k)

simple placing in bottles, cans, flasks, bags, cases, boxes, fixing on cards or boards and all other simple packaging operations;

(l)

affixing or printing marks, labels, logos and other like distinguishing signs on products or their packaging;

(m)

simple mixing of products, whether or not of different kinds,

(n)

simple assembly of parts of articles to constitute a complete article or disassembly of products into parts;

(o)

a combination of two or more operations specified in subparagraphs (a) to (n);

(p)

slaughter of animals.

2.

All operations carried out either in the Community or in Croatia on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 8

Unit of qualification

1.

The unit of qualification for the application of the provisions of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.

Accordingly, it follows that:

(a)

when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole constitutes the unit of qualification;

(b)

when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product must be taken individually when applying the provisions of this Protocol.

2.

Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 9

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 10

Sets

Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 per cent of the ex-works price of the set.

Article 11

Neutral elements

In order to determine whether a product originates, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)

energy and fuel;

(b)

plant and equipment;

(c)

machines and tools;

(d)

goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 12

Principle of territoriality

1.

The conditions for acquiring originating status set out in Title II must continue to be fulfilled at all times in the Community or in Croatia.

2.

If originating goods exported from the Community or from Croatia to another country are returned, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)

the returning goods are the same as those that were exported;

and

(b)

they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

3.

The acquisition of originating status in accordance with the conditions set out in Title II shall not be affected by working or processing done outside the Community or Croatia on materials exported from the Community or Croatia and subsequently reimported there, provided:

(a)

the said materials are wholly obtained in the Community or Croatia or have undergone working or processing beyond the insufficient operations listed in Article 7 prior to being exported; and

(b)

it can be demonstrated to the satisfaction of the customs authorities that:

(i)

the reimported goods have been obtained by working or processing the exported materials;

and

(ii)

the total added value acquired outside the Community or Croatia by applying the provisions of this Article does not exceed 10 % of the ex-works price of the end product for which originating status is claimed.

(i)

the reimported goods have been obtained by working or processing the exported materials;

and

(ii)

the total added value acquired outside the Community or Croatia by applying the provisions of this Article does not exceed 10 % of the ex-works price of the end product for which originating status is claimed.

4.

For the purposes of paragraph 3, the conditions for acquiring originating status set out in Title II shall not apply to working or processing done outside the Community or Croatia. But where, in the list in Annex II, a rule setting a maximum value for all the non-originating materials incorporated is applied in determining the originating status of the end product, the total value of the non-originating materials incorporated in the territory of the party concerned, taken together with the total added value acquired outside the Community or Croatia by applying the provisions of this Article, shall not exceed the stated percentage.

5.

For the purposes of applying the provisions of paragraph 3 and 4, “total added value” shall be taken to mean all costs arising outside the Community or Croatia, including the value of the materials incorporated there.

6.

The provisions of paragraphs 3 and 4 shall not apply to products which do not fulfil the conditions set out in the list in Annex II and which can be considered sufficiently worked or processed only if the general values fixed in Article 6(2) are applied.

7.

The provisions of paragraphs 3 and 4 shall not apply to products coming under Chapters 50 to 63 of the Harmonised System.

8.

Any working or processing of the kind covered by the provisions of this Article and done outside the Community or Croatia shall be done under the outward processing arrangements, or similar arrangements.

Article 13

Direct transport

1.

The preferential treatment provided for under the Agreement applies only to products, satisfying the requirements of this Protocol, which are transported directly between the Community and Croatia. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, trans-shipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territory other than that of the Community or Croatia.

2.

Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of:

(a)

a single transport document covering the passage from the exporting country through the country of transit; or

(b)

a certificate issued by the customs authorities of the country of transit:

(i)

giving an exact description of the products;

(ii)

stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used;

and

(iii)

certifying the conditions under which the products remained in the transit country;

or

(i)

giving an exact description of the products;

(ii)

stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used;

and

(iii)

certifying the conditions under which the products remained in the transit country;

or

(c)

failing these, any substantiating documents.

Article 14

Exhibitions

1.

Originating products, sent for exhibition in a country other than the Community or Croatia shall benefit on importation from the provisions of the Agreement provided it is shown to the satisfaction of the customs authorities that:

(a)

an exporter has consigned these products from the Community or Croatia to the country in which the exhibition is held and has exhibited them there;

(b)

the products have been sold or otherwise disposed of by that exporter to a person in the Community or Croatia;

(c)

the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition;

and

(d)

the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2.

A proof of origin must be issued or made out in accordance with the provisions of Title V and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required

3.

Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products, and during which the products remain under customs control.

TITLE IV

DRAWBACK OR EXEMPTION

Article 15

Prohibition of drawback of, or exemption from, customs duties

1.

Non-originating materials used in the manufacture of products originating in the Community or in Croatia, for which a proof of origin is issued or made out in accordance with the provisions of Title V shall not be subject in the Community or in Croatia to drawback of, or exemption from, customs duties of whatever kind.

2.

The prohibition in paragraph 1 shall apply to any arrangement for refund, remission or non-payment, partial or complete, of customs duties or charges having an equivalent effect, applicable in the Community or in Croatia to materials used in the manufacture where such refund, remission or non-payment applies, expressly or in effect, when products obtained from the said materials are exported and not when they are retained for home use there.

3.

The exporter of products covered by a proof of origin shall be prepared to submit at any time, upon request from the customs authorities, all appropriate documents proving that no drawback has been obtained in respect of the non-originating materials used in the manufacture of the products concerned and that all customs duties or charges having equivalent effect applicable to such materials have actually been paid.

4.

The provisions of paragraphs 1 to 3 shall also apply in respect of packaging within the meaning of Article 8(2), accessories, spare parts and tools within the meaning of Article 9 and products in a set within the meaning of Article 10 when such items are non-originating.

5.

The provisions of paragraphs 1 to 4 shall apply only in respect of materials which are of the kind to which the Agreement applies. Furthermore, they shall not preclude the application of an export refund system for agricultural products, applicable upon export in accordance with the provisions of the Agreement.

6.

Notwithstanding paragraph 1, Croatia may apply arrangements for drawback of, or exemption from, customs duties or charges having an equivalent effect, applicable to materials used in the manufacture of originating products, subject to the following provisions:

(a)

a 5 per cent rate of customs charge shall be retained in respect of products falling within Chapters 25 to 49 and 64 to 97 of the Harmonised System, or such lower rate as is in force in Croatia;

(b)

a 10 per cent rate of customs charge shall be retained in respect of products falling within Chapters 50 to 63 of the Harmonised System, or such lower rate as is in force in roatia.

This article is long: the rest is at the official publication.