[The maximum levels refer to total arsenic.] [Upon request of the competent authorities, the responsible operator must perform an analysis to demonstrate that the content of inorganic arsenic is lower than 2 ppm. This analysis is of particular importance for the seaweed species Hizikia fusiforme.] [Forage includes products intended for animal feed such as hay, silage, fresh grass, etc.] [The maximum levels refer to total mercury.] [The maximum levels are expressed as sodium nitrite.] [The maximum level established for premixtures takes into account the additives with the highest level of lead and cadmium and not the sensitivity of the different animal species to lead and cadmium. As provided in Article 16 of Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutrition (OJ L 268, 18.10.2003, p. 29), in order to protect animal and public health, it is the responsibility of the producer of premixtures to ensure that, in addition to compliance with the maximum levels for premixtures, the instructions for use on the premixture are in accordance with the maximum levels for complementary and complete feed.] [Maximum levels refer to an analytical determination of fluorine, whereby extraction is performed with hydrochloric acid 1 N for 20 minutes at ambient temperature. Equivalent extraction procedures can be applied for which it can be demonstrated that the used extraction procedure has an equal extraction efficiency.] [The % of phosphorus is relative to a feed with a moisture content of 12 %.] [The maximum level refers to melamine only. The inclusion of the structurally related compounds cyanuric acid, ammeline and ammelide in the maximum level will be considered at a later stage.] [Calcium and magnesium carbonate refers to the natural mixture of calcium carbonate and magnesium carbonate as described in Commission Regulation (EU) No 575/2011 of 16 June 2011 on the Catalogue of feed materials (OJ L 159, 17.6.2011, p. 25).] [The maximum level is applicable to canned pet food as sold.] [For the determination of lead in kaolinitic clay and in feed containing kaolinitic clay, the maximum level refers to an analytical determination of lead, whereby extraction is performed in nitric acid (5 % w/w) for 30 minutes at boiling temperature. Equivalent extraction procedures can be applied for which it can be demonstrated that the used extraction procedure has an equal extraction efficiency.] [The maximum level is applicable on wet weight basis.]
Undesirable substance | Products intended for animal feed | Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
Arsenic
Feed materials | 2
with the exception of:
meal made from grass, from dried lucerne and from dried clover, and dried sugar beet pulp and dried molasses sugar beet pulp;
4
palm kernel expeller;
4
peat; leonardite;
5
phosphates, calcareous marine algae;
10
calcium carbonate; calcium and magnesium carbonate; calcareous marine shells;
15
magnesium oxide; magnesium carbonate;
20
fish, other aquatic animals and products derived thereof;
25
seaweed meal and feed materials derived from seaweed.
40
Iron particles used as tracer. | 50
Feed additives belonging to the functional group of compounds of trace elements | 30
with the exception of:
cupric sulphate pentahydrate; cupric carbonate; dicopper chloride trihydroxide; ferrous carbonate; dimanganese chloride trihydroxide
50
zinc oxide; manganous oxide; cupric oxide.
100
Complementary feed | 4
with the exception of:
mineral feed;
12
complementary feed for pet animals containing fish, other aquatic animals and products derived thereof and/or seaweed meal and feed materials derived from seaweed;
10
long-term supply formulations of feed for particular nutritional purposes with a concentration of trace elements higher than 100 times the established maximum content in complete feed;
30
Complete feed | 2
with the exception of:
complete feed for fish and fur animals;
10
complete feed for pet animals containing fish, other aquatic animals and products derived thereof and/or seaweed meal and feed materials derived from seaweed.
10
Cadmium
Feed materials of vegetable origin | 1
Feed materials of animal origin | 2
Feed materials of mineral origin | 2
with the exception of: |
phosphates.
10
Feed additives belonging to the functional group of compounds of trace elements | 10
with the exception of: |
cupric oxide, manganous oxide, zinc oxide and manganous sulphate monohydrate.
30
Feed additives belonging to the functional groups of binders and anti-caking agents | 2
Premixtures | 15
Complementary feed | 0,5
with the exception of: |
mineral feed
– containing < 7 % phosphorus
5
– containing ≥ 7 % phosphorus
0,75 per 1 % phosphorus, with a maximum of 7,5
complementary feed for pet animals
2
long-term supply formulations of feed for particular nutritional purposes with a concentration of trace elements higher than 100 times the established maximum content in complete feed;
15
Complete feed | 0,5
with the exception of: |
complete feed for cattle (except calves), sheep (except lambs), goats (except kids) and fish;
1
complete feed for pet animals.
2
Fluorine
Feed materials
with the exception of:
150
feed materials of animal origin except marine crustaceans such as marine krill; calcareous marine shells;
500
marine crustaceans such as marine krill;
3000
phosphates;
2000
calcium carbonate; calcium and magnesium carbonate
350
magnesium oxide;
600
calcareous marine algae.
1250
Vermiculite (E 561). | 3000
Complementary feed: |
containing ≤ 4 % phosphorus;
500
containing > 4 % phosphorus.
125 per 1 % phosphorus
Complete feed
with the exception of:
150
complete feed for pigs;
100
complete feed for poultry (except chicks) and fish;
350
complete feed for chicks;
250
complete feed for cattle, sheep and goats
– in lactation;
30
– other.
50
Lead
Feed materials | 10
with the exception of:
forage;
30
phosphates, calcareous marine algae and calcareous marine shells;
15
calcium carbonate; calcium and magnesium carbonate;
20
yeasts.
5
Feed additives belonging to the functional group of compounds of trace elements | 100
with the exception of:
zinc oxide;
400
manganous oxide, ferrous carbonate, cupric carbonate, copper (I) oxide.
200
Feed additives belonging to the functional groups of binders and anti-caking agents | 30
with the exception of:
clinoptilolite of volcanic origin; natrolite-phonolite.
60
Premixtures | 200
Complementary feed | 10
with the exception of:
mineral feed;
15
long-term supply formulations of feed for particular nutritional purposes with a concentration of trace elements higher than 100 times the established maximum content in complete feed.
60
Complete feed. | 5
Mercury
Feed materials | 0,1
with the exception of:
fish, other aquatic animals and products derived thereof intended for the production of compound feed for food producing animals;
0,5
fish, other aquatic animals and products derived thereof intended for the production of compound feed for dogs, cats, ornamental fish and fur animals;
1,0
fish, other aquatic animals and products derived thereof as canned wet feed material for direct feeding of dogs and cats
0,3
calcium carbonate; calcium and magnesium carbonate.
0,3
Compound feed | 0,1
with the exception of:
mineral feed;
0,2
compound feed for fish;
0,2
compound feed for dogs, cats, ornamental fish and fur animals.
0,3
Nitrite
Feed materials | 15
with the exception of: |
fishmeal;
30
silage;
—
products and by-products from sugar beet and sugarcane and from starch and alcoholic drink production.
—
Complete feed | 15
with the exception of: |
complete feed for dogs and cats with a moisture content exceeding 20 %.
—
Melamine
Feed
with the exception of:
2,5
canned pet food
2,5
the following feed additives:
guanidino acetic acid (GAA);
20
urea;
—
biuret.
—
Undesirable substance | Products intended for animal feed | Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
Aflatoxin B1
Feed materials | 0,02
Complementary and complete feed | 0,01
with the exception of: |
compound feed for dairy cattle and calves, dairy sheep and lambs, dairy goats and kids, piglets and young poultry animals,
0,005
compound feed for cattle (except dairy cattle and calves), sheep (except dairy sheep and lambs), goats (except dairy goats and kids), pigs (except piglets) and poultry (except young animals).
0,02
Rye ergot (Claviceps purpurea)
Feed materials and compound feed containing unground cereals. | 1000
[The maximum levels are expressed as allyl isothiocyanate.] [Upon request of the competent authorities, the responsible operator must perform an analysis to demonstrate that the content of total glucosinolates is lower than 30 mmol/kg. The method of analysis of reference is EN-ISO 9167-1:1995.]
Undesirable substance | Products intended for animal feed | Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
Free gossypol
Feed materials | 20
with the exception of: |
cottonseed,
6000
cottonseed cakes and cottonseed meal.
1200
Complete feed | 20
with the exception of: |
complete feed for cattle (except calves),
500
complete feed for sheep (except lambs) and goats (except kids),
300
complete feed for poultry (except laying hens) and calves,
100
complete feed for rabbits, lambs, kids and pigs (except piglets).
60
Hydrocyanic acid
Feed materials | 50
with the exception of: |
linseed,
250
linseed cakes,
350
manioc products and almond cakes.
100
Complete feed | 50
with the exception of: |
complete feed for young chickens (< 6 weeks).
10
Theobromine
Complete feed | 300
with the exception of: |
complete feed for pigs,
200
complete feed for dogs, rabbits, horses and fur animals.
50
vinyl thiooxazolidone (5-vinyloxazolidine-2-thione)
Complete feed for poultry | 1000
with the exception of: |
complete feed for laying hens.
500
Volatile mustard oil
Feed materials | 100
with the exception of: |
Camelina seed and products derived thereof, products derived from mustard seed, rape seed and products derived thereof.
4000
Complete feed | 150
with the exception of: |
complete feed for cattle (except calves), sheep (except lambs) and goats (except kids);
1000
complete feed for pigs (except piglets) and poultry.
500
[Singly or combined expressed as dieldrin.] [Maximum level for aldrin and dieldrin, singly or combined, expressed as dieldrin.] [Numbering system according to Parlar, prefixed by either CHB or ‘Parlar’: CHB 26: 2-endo,3-exo,5-endo,6-exo,8,8,10,10-octochlorobornane, CHB 50: 2-endo,3-exo,5-endo,6-exo,8,8,9,10,10-nonachlorobornane, CHB 62: 2,2,5,5,8,9,9,10,10-nonachlorobornane.]
Undesirable substance | Products intended for animal feed | Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
Aldrin
Feed materials and compound feed | 0,01
Dieldrin
with the exception of: |
fats and oils,
0,1
compound feed for fish.
0,02
Camphechlor (toxaphene) – sum of indicator congeners CHB 26, 50 and 62
Fish, other aquatic animals and products derived thereof | 0,02
with the exception of |
fish oil.
0,2
Complete feed for fish. | 0,05
Chlordane (sum of cis- and trans-isomers and of oxychlordane, expressed as chlordane)
Feed materials and compound feed | 0,02
with the exception of: |
fats and oils.
0,05
DDT (sum of DDT-, DDD- (or TDE-) and DDE-isomers, expressed as DDT)
Feed materials and compound feed | 0,05
with the exception of: |
fats and oils.
0,5
Endosulfan (sum of alpha- and beta-isomers and of endosulfansulphate expressed as endosulfan)
Feed materials and compound feed
with the exception of:
0,1
cotton seed and products derived from the processing thereof, except crude cotton seed oil
0,3
soybean and products derived from the processing thereof, except crude soybean oil
0,5
crude vegetable oil
1,0
complete feed for fish except for Salmonids
0,005
complete feed for Salmonids
0,05
Endrin (sum of endrin and of delta-ketoi-endrin, expressed as endrin)
Feed materials and compound feed | 0,01
with the exception of: |
fats and oils.
0,05
Heptachlor (sum of heptachlor and of heptachlorepoxide, expressed as heptachlor)
Feed materials and compound feed | 0,01
with the exception of: |
fats and oils.
0,2
Hexachlorobenzene (HCB)
Feed materials and compound feed | 0,01
with the exception of: |
fats and oils.
0,2
Hexachlorocyclohexane (HCH)
alpha-isomers
Feed materials and compound feed | 0,02
with the exception of: |
fats and oils.
0,2
beta-isomers
Feed materials | 0,01
with the exception of: |
fats and oils.
0,1
Compound feed | 0,01
with the exception of: |
compound feed for dairy cattle.
0,005
gamma-isomers
Feed materials and compound feed | 0,2
with the exception of: |
fats and oils.
2,0
[Upper-bound concentrations; upper-bound concentrations are calculated on the assumption that all values of the different congeners below the limit of quantification are equal to the limit of quantification.] [Table of TEF (= toxic equivalency factors) for dioxins, furans and dioxin-like PCBs: WHO-TEFs for human risk assessment based on the conclusions of the World Health Organisation (WHO) – International Programme on Chemical Safety (IPCS) expert meeting which was held in Geneva in June 2005 (Martin van den Berg et al., The 2005 World Health Organisation Re-evaluation of Human and Mammalian Toxic Equivalency Factors for Dioxins and Dioxin-like Compounds. Toxicological Sciences 93(2), 223–241 (2006)) Abbreviations used: ‘T’ = tetra; ‘Pe’ = penta; ‘Hx’ = hexa; ‘Hp’ = hepta; ‘O’ = octa; ‘CDD’ = chlorodibenzodioxin; ‘CDF’ = chlorodibenzofuran; ‘CB’ = chlorobiphenyl. Congener | TEF value Dibenzo-para-dioxins (‘PCDDs’) and Dibenzo-para-furans (PCDFs) 2,3,7,8-TCDD | 1 1,2,3,7,8-PeCDD | 1 1,2,3,4,7,8-HxCDD | 0,1 1,2,3,6,7,8-HxCDD | 0,1 1,2,3,7,8,9-HxCDD | 0,1 1,2,3,4,6,7,8-HpCDD | 0,01 OCDD | 0,0003 2,3,7,8-TCDF | 0,1 1,2,3,7,8-PeCDF | 0,03 2,3,4,7,8-PeCDF | 0,3 1,2,3,4,7,8-HxCDF | 0,1 1,2,3,6,7,8-HxCDF | 0,1 1,2,3,7,8,9-HxCDF | 0,1 2,3,4,6,7,8-HxCDF | 0,1 1,2,3,4,6,7,8-HpCDF | 0,01 1,2,3,4,7,8,9-HpCDF | 0,01 OCDF | 0,0003 ‘Dioxin-like’ PCBs: Non-ortho PCBs + Mono-ortho PCBs Non-ortho PCBs PCB 77 | 0,0001 PCB 81 | 0,0003 PCB 126 | 0,1 PCB 169 | 0,03 Mono-ortho PCBs PCB 105 | 0,00003 PCB 114 | 0,00003 PCB 118 | 0,00003 PCB 123 | 0,00003 PCB 156 | 0,00003 PCB 157 | 0,00003 PCB 167 | 0,00003 PCB 189 | 0,00003] [Fresh fish and other aquatic animals directly delivered and used without intermediate processing for the production of feed for fur animals are not subject to the maximum levels, while maximum levels of 3,5 ng WHO-PCDD/F-TEQ/kg product and 6,5 ng WHO-PCDD/F-PCB-TEQ/kg product are applicable to fresh fish and 20,0 ng WHO-PCDD/F-PCB-TEQ/kg product is applicable to fish liver used for the direct feeding of pet animals, zoo and circus animals or used as feed material for the production of pet food. The products or processed animal proteins produced from these animals (fur animals, pet animals, zoo and circus animals) cannot enter the food chain and cannot be fed to farmed animals which are kept, fattened or bred for the production of food.] [Fresh fish and other aquatic animals directly delivered and used without intermediate processing for the production of feed for fur animals are not subject to the maximum levels, while maximum levels of 75 μg/kg product are applicable to fresh fish and 200 μg/kg product are applicable to fish liver used for the direct feeding of pet animals, zoo and circus animals or used as feed material for the production of pet food. The products or processed animal proteins produced from these animals (fur animals, pet animals, zoo and circus animals) cannot enter the food chain and cannot be fed to farmed animals which are kept, fattened or bred for the production of food.] [The maximum level is also applicable to the feed additives belonging to the functional groups of substances for the control of radionuclide contamination and substances for reduction of the contamination of feed by mycotoxins which are also belonging to the functional groups of binders and anti-caking agents.]
Undesirable substance | Products intended for animal feed | Maximum content in ng WHO-PCDD/F-TEQ/kg (ppt) relative to a feed with a moisture content of 12 %
Dioxins [sum of polychlorinated dibenzo-para-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO-TEFs (toxic equivalency factors, 2005)]
Feed materials of plant origin | 0,75
with the exception of: |
vegetable oils and their by-products.
0,75
Feed materials of mineral origin | 0,75
Feed materials of animal origin: |
Animal fat, including milk fat and egg fat,
1,50
Other land animal products including milk and milk products and eggs and egg products.
0,75
Fish oil,
5,0
Fish, other aquatic animals, and products derived thereof with the exception of fish oil, hydrolysed fish protein containing more than 20 % fat and crustacea meal,
1,25
Hydrolysed fish protein containing more than 20 % fat; crustacea meal.
1,75
Feed additives belonging to the functional groups of binders and anti-caking agents | 0,75
Feed additives belonging to the functional group of compounds of trace elements. | 1,0
Premixtures | 1,0
Compound feed | 0,75
with the exception of: |
compound feed for pet animals and fish,
1,75
compound feed for fur animals.
—
Undesirable substance | Products intended for animal feed | Maximum content in ng WHO-PCDD/F-PCB-TEQ/kg (ppt) relative to a feed with a moisture content of 12 %
Sum of dioxins and dioxin-like PCBs (sum of polychlorinated dibenzo-para-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) expressed in World Health Organisation (WHO) toxic equivalents, using the WHO-TEFs (toxic equivalency factors), 2005)
Feed materials of plant origin with the exception of: | 1,25
vegetable oils and their by-products
1,5
Feed materials of mineral origin | 1,0
Feed materials of animal origin: |
Animal fat, including milk fat and egg fat
2,0
Other land animal products including milk and milk products and eggs and egg products
1,25
Fish oil
20,0
Fish, other aquatic animals, and products derived thereof with the exception of fish oil and fish protein, hydrolysed, containing more than 20 % fat
4,0
Fish protein, hydrolysed, containing more than 20 % fat
9,0
Feed additives belonging to the functional groups of binders and anti-caking agents | 1,5
Feed additives belonging to the functional group of compounds of trace elements | 1,5
Premixtures | 1,5
Compound feed with the exception of: | 1,5
compound feed for pet animals and fish
5,5
compound feed for fur animals
—
Undesirable substance | Products intended for animal feed | Maximum content in μg/kg (ppb) relative to a feed with a moisture content of 12 %
Non-dioxin-like PCBs (sum of PCB 28, PCB 52, PCB 101, PCB 138, PCB 153 and PCB 180 (ICES – 6))
Feed materials of plant origin | 10
Feed materials of mineral origin | 10
Feed materials of animal origin: |
Animal fat, including milk fat and egg fat
10
Other land animal products including milk and milk products and eggs and egg products
10
Fish oil
175
Fish, other aquatic animals and products derived thereof with the exception of fish oil and fish protein, hydrolysed, containing more than 20 % fat
30
Fish protein, hydrolysed, containing more than 20 % fat
50
Feed additives belonging to the functional groups of binders and anti-caking agents | 10
Feed additives belonging to the functional group of compounds of trace elements | 10
Premixtures | 10
Compound feed with the exception of: | 10
compound feed for pet animals and fish
40
compound feed for fur animals
—
[In so far determinable by analytical microscopy.] [Includes also seed husk fragments.] [In case unequivocal evidence is provided that the grains and seeds are intended for milling or crushing, there is no need to perform a cleaning of the grains and seeds containing con-compliant levels of seeds of Ambrosia spp. before milling or crushing on the condition that: the consignment is transported as a whole to the milling or crushing plant, and — the milling or crushing plant is informed in advance of the presence of high level of Ambrosia spp. seeds in order take additional prevention measures to avoid dissemination into the environment, and solid evidence is provided that prevention measures are taken to avoid dissemination of Ambrosia spp. seeds into the environment during transport to the crushing or milling plant, and the competent authority agrees to the transport, after having ensured that the abovementioned conditions are fulfilled. In case these conditions are not fulfilled, the consignment must be cleaned before any transport into the EU and the screenings must be appropriately destroyed.]
Undesirable substance | Products intended for animal feed | Maximum content in mg/kg (ppm) relative to a feed with a moisture content of 12 %
Weed seeds and unground and uncrushed fruits containing alkaloids, glucosides or other toxic substances separately or in combination including
Feed materials and compound feed | 3000
Datura sp.
1000
Crotalaria spp.
Feed materials and compound feed | 100
Seeds and husks from Ricinus communis L., Croton tiglium L. and Abrus precatorius L. as well as their processed derivatives, separately or in combination
Feed materials and compound feed | 10
Unhusked beech mast — Fagus sylvatica L.
Feed materials and compound feed | Seeds and fruit as well as their processed derivatives may only be present in feed in trace amounts not quantitatively determinable
Purghera — Jatropha curcas L.
Feed materials and compound feed | Seeds and fruit as well as their processed derivatives may only be present in feed in trace amounts not quantitatively determinable
Seeds from Ambrosia spp.
Feed materials
with the exception of
50
Millet (grains of Panicum miliaceum L.) and sorghum (grains of Sorghum bicolor (L) Moench s.l.) not directly fed to animals
200
Compound feed containing unground grains and seeds | 50
Seeds from
Indian mustard — Brassica juncea (L.) Czern. and Coss. ssp. integrifolia (West.) Thell.
Sareptian mustard — Brassica juncea (L.) Czern. and Coss. ssp. juncea
Chinese mustard — Brassica juncea (L.) Czern. and Coss. ssp. juncea var. lutea Batalin
Black mustard — Brassica nigra (L.) Koch