The market investigation has revealed that, despite a certain degree of harmonisation achieved at the European level (in particular Council Directive 85/3/EEC which harmonised weight requirements and dimensions for international traffic within the Union), there are still a number of technical requirements for heavy trucks which vary from country to country. This conclusion is particularly valid for the United Kingdom, Ireland and some of the Nordic countries. As far as the United Kingdom and Ireland are concerned, the fact that all vehicles must be adapted for right-hand drive severely restricts the possibility of importing vehicles intended for continental Europe. Furthermore, the Commission's attention has been drawn to the fact that the specification of the vehicles of the same model would be different in Ireland from that in the United Kingdom. Indeed, Scania, Volvo and Iveco all operate a heavier specification (in terms of running gear, driveline, suspension, tyres and springs) on the Irish market owing to the adverse road conditions in this country. For some of the Nordic countries, it is noted that whole vehicle type approval (i.e. complete harmonisation of technical regulations) in the heavy truck sector is not expected to take place within the next two to three years. Different regulations still apply for example in Sweden and Finland as concerns permitted total transported tonnage and maximum length of the trucks. Higher tonnage and longer trucks are allowed in these two countries (60 tonnes and 25,25 metres) than in the rest of Europe. This gives, in general, Volvo and Scania an advantage since their trucks are traditionally produced to meet the requirements (e.g. engine and axle configuration) of longer and heavier vehicles.
Recital 56, Decision_act (EU) 2001/403
In forcesince 14 Mar 2000
- celex=31985L0003