3 ANNEXE III, Directive (EU) 1999/105

In force

MINIMUM REQUIREMENTS FOR THE APPROVAL OF BASIC MATERIAL INTENDED FOR THE PRODUCTION OF REPRODUCTIVE MATERIAL TO BE CERTIFIED AS "SELECTED"

General: The stand will be judged with respect to the specific stated purpose for which the reproductive material will be intended and due weight shall be given to requirements 1-10, depending on the specific purpose. The criteria for selection shall be determined by the Member State and the purpose shall be indicated in the National Register.

1.

Origin: It must be determined either by historical evidence or other appropriate means whether the stand is autochthonous/indigenous, non-autochthonous/non-indigenous or the origin is unknown and for non-authochthonous/non-indigenous basic material the origin must be stated if known.

2.

Isolation: Stands must be situated at a sufficient distance from poor stands of the same species or from stands of a related species or variety which can form hybrids with the species in question. Particular attention shall be paid to this requirement when the stands surrounding autochthonous/indigenous stands are non-autochthonous/non-indigenous or of unknown origin.

3.

Effective Size of the Population: Stands must consist of one or more groups of trees well distributed and sufficiently numerous to ensure adequate inter-pollination. To avoid the unfavourable effects of inbreeding, selected stands shall consist of a sufficient number and density of individuals on a given area.

4.

Age and Development: Stands must consist of trees of such an age or stage of development that the criteria given for the selection can be clearly judged.

5.

Uniformity: Stands must show a normal degree of individual variation in morphological characters. When necessary, inferior trees should be removed.

6.

Adaptedness: Adaptation to the ecological conditions prevailing in the Region of Provenance must be evident.

7.

Health and Resistance: Trees in stands must in general be free from attacks by damaging organisms and show resistance to the adverse climatic and site conditions, except for damage by pollution, in the place where they are growing.

8.

Volume production: For the approval of selected stands volume production of wood must normally be superior to the accepted mean under similar ecological and management conditions.

9.

Wood Quality: The quality of the wood shall be taken into account and, in some cases, it may be an essential criterion.

10.

Form or Growth Habit: Trees in stands must show particularly good morphological features, especially straigthness and circularity of stem, favourable branching habit, small size of branches and good natural pruning. In addition, the porportion of forked trees and those showing spiral grain should be low.