For kits having more than one of the intended uses specified in the following families, the tasks for the approved body, derived from the relevant systems of attestation of conformity, are cumulative.
PRODUCT FAMILY
SELF-SUPPORTING TRANSLUCENT ROOF KITS (EXCEPT GLASS-BASED KITS) (1/3)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, EOTA is requested to specify the following system(s) of attestation of conformity in the relevant guideline for European technical approvals:
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Self-supporting translucent roof kits (except glass-based kits) | For use in roofs and roof finishes | — | 3
System 3: See CPD Annex III (2)(ii), second possibility.
Conditions to be applied by EOTA on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such a characteristic (see Article 2(1) of the CPD and, where applicable, clause 1.2.3 of the interpretative documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
SELF-SUPPORTING TRANSLUCENT ROOF KITS (EXCEPT GLASS-BASED KITS) (2/3)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, EOTA is requested to specify the following system(s) of attestation of conformity in the relevant guideline for European technical approvals:
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Self-supporting translucent roof kits (except glass-based kits) | For uses subject to external fire performance regulations | Products requiring testing
Products ‘deemed to satisfy’ without testing (1) | 3
4
To be confirmed in discussions with the Fire Regulators Group.
System 3: See CPD Annex III (2)(ii), second possibility.
System 4: See CPD Annex III (2)(ii), third possibility.
Conditions to be applied by EOTA on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such a characteristic (see Article 2(1) of the CPD and, where applicable, clause 1.2.3 of the interpretative documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
SELF-SUPPORTING TRANSLUCENT ROOF KITS (EXCEPT GLASS-BASED KITS) (3/3)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, EOTA is requested to specify the following system(s) of attestation of conformity in the relevant guideline for European technical approvals:
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Self-supporting translucent roof kits (except glass-based kits) | For uses subject to reaction to fire regulations | A1 (1), A2 (1), B (1), C (1)
A1 (2), A2 (2), B (2), C (2), D, E
(A1 to E) (3), F | 1
3
4
Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material) .
Products/materials not covered by footnote 1.
Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
System 1: See CPD Annex III (2)(i), without audit-testing of samples.
System 3: See CPD Annex III (2)(ii), second possibility.
System 4: See CPD Annex III (2)(ii), third possibility.
Conditions to be applied by EOTA on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such a characteristic (see Article 2(1) of the CPD and, where applicable, clause 1.2.3 of the interpretative documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
( 1 ) OJ L 40, 11. 2. 1989, p. 12.
( 2 ) OJ L 220, 30. 8. 1993, p. 1.
( 3 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 4 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 5 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 6 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 7 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 8 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 9 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 10 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).