for products having more than one of the intended uses specified in the following families, the tasks for the approved body, derived from the relevant systems of attestation of conformity, are cumulative.
PRODUCT FAMILY
INTERNAL AND EXTERNAL WALL AND CEILING FINISHES (1/5)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):
Product(s) | Intended use(s) | Level(s) or class(es)
(fire resistance) | Attestation of conformity system(s)
Panels | As internal or external finishes, as complete elements, used for fire protection of walls or ceilings | Any | 3
Suspended ceilings
(kits) | As internal or external finishes used for fire protection of ceilings
System 3: See Directive 89/106/EEC, Annex III(2)(ii), second possibility.
Conditions to be applied by CEN on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
INTERNAL AND EXTERNAL WALL AND CEILING FINISHES (2/5)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Panels | As internal or external stiffening elements in walls or ceilings | — | 3
Tiles
Panels
(of brittle materials) | As internal or external finishes in walls or ceilings subject to requirements against accidental injuries from cutting objects
Suspended ceilings
(kits) | As internal or external finish in ceilings subject to safety in use requirements
Tiles
Panels | In internal or external suspended ceilings subject to safety in use requirements
Featured profiles
Suspending frames | To support internal or external wall or ceiling finishes and suspended ceilings subject to safety in use requirements
System 3: See Directive 89/106/EEC, Annex III(2)(ii), second possibility.
Conditions to be applied by CEN on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
INTERNAL AND EXTERNAL WALL AND CEILING FINISHES (3/5)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):
Product(s) | Intended use(s) | Level(s) or class(es)
(reaction to fire) (1) | Attestation of conformity system(s)
Coverings in roll form
Linings | As internal finishes in walls or ceilings subject to reaction to fire regulations | A1 (1), A2 (1), B (1), C (1) | 1
Shingles
Cladding slabs | As external finishes in walls or ceilings subject to reaction to fire regulations
Suspended ceilings
(kits) | As internal or external finishes in ceilings subject to reaction to fire regulations | A1 (2), A2 (2), B (2), C (2), D, E | 3
Tiles
Sidings
Panels | As internal or external finishes in walls or ceilings subject to reaction to fire regulations
Featured profiles
Suspending frames | To support internal or external wall or ceiling finishes, or suspended ceilings, subject to reaction to fire regulations | (A1 to E) (3), F | 4
For reaction to fire, see Commission Decision 94/611/EC.
(**) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material) .
(***) Products/materials not covered by footnote (*) .
(****) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
System 1: See Directive 89/106/EEC, Annex III(2)(i), without audit-testing of samples.
System 3: See Directive 89/106/EEC, Annex III(2)(ii), second possibility.
System 4: See Directive 89/106/EEC, Annex III(2)(ii), third possibility.
Conditions to be applied by CEN on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
INTERNAL AND EXTERNAL WALL AND CEILING FINISHES (4/5)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Suspended ceilings
(kits) | As internal or external finishes in walls or ceilings subject to regulations on dangerous substances (1) | — | 3
Tiles
Shingles
Sidings
Cladding slabs
Panels | As internal or external finishes in walls or ceilings, as relevant, subject to regulations on dangerous substances (1)
(*) In particular, those dangerous substances defined in Council Directive 76/769/EEC, as amended.
System 3: See Directive 89/106/EEC, Annex III(2)(ii), second possibility.
Conditions to be applied by CEN on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
INTERNAL AND EXTERNAL WALL AND CEILING FINISHES (5/5)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):
Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)
Suspended ceilings
(kits) | As internal or external finish in ceilings for other uses mentioned in the mandate (1) | — | 4
Wall coverings in roll form
Ceiling linings
Tiles
Shingles
Sidings
Cladding slabs
Panels | As internal or external finishes in walls or ceilings for other uses mentioned in the mandate (1)
Featured profiles
Suspending frames | To support internal or external wall or ceiling finishes, or suspended ceilings, for other uses mentioned in the mandate (1)
Other intended uses covered by the mandate are: for vapour control, for water penetration control, for acoustic control and for thermal control.
System 4: See Directive 89/106/EEC, Annex III(2)(ii), third possibility.
Conditions to be applied by CEN on the specifications of the attestation of conformity system
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, point 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
( 1 ) OJ L 40, 11. 2. 1989, p. 12.
( 2 ) OJ L 220, 30. 8. 1993, p. 1.
( 3 ) Products/materials not covered by footnote 1 in Annex II.
( 4 ) Products/materials not covered by footnote 1 in Annex II.
( 5 ) Products/materials not covered by footnote 1 in Annex II.
( 6 ) Products/materials not covered by footnote 1 in Annex II.
( 7 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 8 ) Products/materials not covered by footnote 1 in Annex II.
( 9 ) Products/materials not covered by footnote 1 in Annex II.
( 10 ) Products/materials not covered by footnote 1 in Annex II.
( 11 ) Products/materials not covered by footnote 1 in Annex II.
( 12 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 13 ) Products/materials not covered by footnote 1 in Annex II.
( 14 ) Products/materials not covered by footnote 1 in Annex II.
( 15 ) Products/materials not covered by footnote 1 in Annex II.
( 16 ) Products/materials not covered by footnote 1 in Annex II.
( 17 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 18 ) Products/materials not covered by footnote 1 in Annex II.
( 19 ) Products/materials not covered by footnote 1 in Annex II.
( 20 ) Products/materials not covered by footnote 1 in Annex II.
( 21 ) Products/materials not covered by footnote 1 in Annex II.
( 22 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 23 ) Products/materials not covered by footnote 1 in Annex II.
( 24 ) Products/materials not covered by footnote 1 in Annex II.
( 25 ) Products/materials not covered by footnote 1 in Annex II.
( 26 ) Products/materials not covered by footnote 1 in Annex II.
( 27 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 28 ) In particular, those dangerous substances defined in Council Directive 76/769/EEC, as amended.
( 29 ) In particular, those dangerous substances defined in Council Directive 76/769/EEC, as amended.
( 30 ) Other intended uses covered by the mandate are: for vapour control, for water penetration control, for acoustic control, and for thermal control.
( 31 ) Other intended uses covered by the mandate are: for vapour control, for water penetration control, for acoustic control, and for thermal control.
( 32 ) Other intended uses covered by the mandate are: for vapour control, for water penetration control, for acoustic control, and for thermal control.
( 33 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 34 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 35 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 36 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 37 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 38 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 39 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 40 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 41 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 42 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 43 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 44 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 45 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 46 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 47 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 48 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 49 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 50 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 51 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 52 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).