ANNEX III Note:, Decision_act (EU) 1998/436

In forcesince 2 Aug 2001

for products having more than one of the intended uses specified in the following families, the tasks for the approved body, derived from the relevant systems of attestation of conformity, are cumulative.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (1/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) (fire resistance) | Attestation of conformity system(s)

Flat and profiled sheets | For uses subject to resistance to fire regulations (e.g. fire compartmentation) | Any | 3

Roofing tiles, slates, stones and shingles

Factory-bonded composite or sandwich panels

Rooflights

Roof windows

System 3: see CPD Annex III(2)(ii), second possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (2/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) (reaction to fire) | Attestation of conformity system(s)

Flat and profiled sheets | For uses subject to reaction to fire regulations | A1 (1), A2 (1), B (1), C (1) | 1

Roofing tiles, slates, stones and shingles | A1 (2), A2 (2), B (2), C (2), D, E | 3

Factory-bonded composite or sandwich panels | (A1 to E) (3), F | 4

Rooflights

Roof windows

Fascias and soffit boards

(*) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).

(**) Products/materials not covered by footnote (*).

(***) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).

System 1: see CPD Annex III(2)(i), without audit-testing of samples.

System 3: see CPD Annex III(2)(ii), second possibility.

System 4: see CPD Annex III(2)(ii), third possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (3/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) (reaction to fire) | Attestation of conformity system(s)

Flat and profiled sheets | For uses subject to external fire performance regulations | Products requiring testing | 3

Roofing tiles, slates, stones and shingles

Factory-bonded composite or sandwich panels

Mastic asphalt roofing | Products ‘deemed to satisfy’ without testing (1) | 4

Roof pavings

Rooflights

Roof windows

Roof access systems, walkways and footholds

Accessories for roof coverings

(*) To be confirmed in discussions with the Fire Regulators Group.

System 3: see CPD Annex III(2)(ii), second possibility.

System 4: see CPD Annex III(2)(ii), third possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (4/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

Flat and profiled sheets | For uses contributing to stiffening the roof structure | 3

Factory-bonded composite or sandwich panels

Rooflights

Roof windows

System 3: see CPD Annex III(2)(ii), second possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (5/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

All roof coverings, rooflights, roof windows and ancillary products | For uses subject to regulations on dangerous substances (1) | — | 3

(*) In particular, those dangerous substances defined in Council Directive 76/769/EEC, as amended.

System 3: see CPD Annex III(2)(ii), second possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

ROOF COVERINGS, ROOFLIGHTS, ROOF WINDOWS AND ANCILLARY PRODUCTS (6/6)

Systems of attestation of conformity

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

Flat and profiled sheets | For uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6) | — | 4

Roofing tiles, slates, stones and shingles

Factory-bonded composite or sandwich panels

Roof pavings

Fascias and soffit boards

Mechanical fixings for roof coverings

Accessories for roof coverings

Roof access systems, walkways and footholds | For uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6) | — | 3

Roof safety hooks and anchorages

Mastic asphalt roofing

Roof windows

Rooflights

System 3: see CPD Annex III(2)(ii), second possibility.

System 4: see CPD Annex III(2)(ii), third possibility.

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2(1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents). In those cases, the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

( 1 ) OJ L 40, 11. 2. 1989, p. 12.

( 2 ) OJ L 220, 30. 8. 1993, p. 1.