ANNEX II PRODUCT FAMILY STRUCTURAL METALLIC PRODUCTS AND ANCILLARIES (1/4), Decision_act (EU) 1998/214

In forcesince 2 Aug 2001
1.

Systems of attestation of conformity

For the product(s) and intended use(s) listed below, CEN/CENELEC are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

Structural metallic sections/profiles

Hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating | to be used in metal structures or in composite metal and concrete structures | 2 + (1)

(1)

System 2 +: See Annex III(2)(ii) of Directive 89/106/EEC, first possibility, including certification of the factory production control by an approved body on the basis of its continuous surveillance, assessment and approval

2.

Conditions to be applied by CEN on the specifications of the attestation of conformity system

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic [see Article 2.1 of the CPD and, where applicable, clause 1.2.3 of the Interpretative Documents]. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

STRUCTURAL METALLIC PRODUCTS AND ANCILLARIES (2/4)

1.

Systems of attestation of conformity

For the product(s) and intended use(s) listed below, CEN/CENELEC are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) | Intended use(s) | Level(s) or class(es) (reaction to fire) | Attestation of conformity system(s)

Structural metallic construction members

Finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. | for uses in work's frames and foundations | — | 2 + (1)

They can be unprotected or protected against corrosion by coating, welded or not.

Structural metallic construction members

Finished metal framing for suspended ceilings (heavy duty). | for uses in work's frames | A1 (2), A2 (2), B (2), C (2) | 1 (3)

They can be unprotected or protected against corrosion by coating, welded or not. | A1 (4), A2 (4), B (4), C (4), D, E, (A1 to E) (5), F | 2 + (1)

(1)

System 2 +: See Annex III(2)(ii) of Directive 89/106/EEC, first possibility, including certification of the factory production control by an approved body on the basis of its continuous surveillance, assessment and approval

(2)

Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material)

(3)

System 1: See CPD Annex III(2)(ii), without audit-testing of samples

(4)

Products/materials not covered by footnote 2

(5)

Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).

2.

Conditions to be applied by CEN on the specifications of the attestation of conformity system

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic [see Article 2.1 of the CPD and, where applicable, clause 1.2.3 of the Interpretative Documents]. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

STRUCTURAL METALLIC PRODUCTS AND ANCILLARIES (3/4)

1.

Systems of attestation of conformity

For the product(s) and intended use(s) listed below, CEN/CENELEC are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

Welding materials | for uses in structural metallic works | 2 + (1)

(1)

System 2 +: See Annex III(2)(ii) of Directive 89/106/EEC, first possibility, including certification of the factory production control by an approved body on the basis of its continuous surveillance, assessment and approval

2.

Conditions to be applied by CEN on the specifications of the attestation of conformity system

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic [see Article 2.1 of the CPD and, where applicable, clause 1.2.3 of the Interpretative Documents]. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

PRODUCT FAMILY

STRUCTURAL METALLIC PRODUCTS AND ANCILLARIES (4/4)

1.

Systems of attestation of conformity

For the product(s) and intended use(s) listed below, CEN/CENELEC are requested to specify the following system(s) of attestation of conformity in the relevant harmonised standard(s):

Product(s) | Intended use(s) | Level(s) or class(es) | Attestation of conformity system(s)

Structural connectors

metallic rivets, bolts (nuts and washers) and H. R. bolts (high strength friction grip bolts), studs, screws, railway fasteners | for uses in structural metallic works | 2 + (1)

(1)

System 2 +: See Annex III(2)(ii) of Directive 89/106/EEC, first possibility, including certification of the factory production control by an approved body on the basis of its continuous surveillance, assessment and approval

2.

Conditions to be applied by CEN on the specifications of the attestation of conformity system

The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic [see Article 2.1 of the CPD and, where applicable, clause 1.2.3 of the Interpretative Documents]. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

( 1 ) OJ L 40, 11. 2. 1989, p. 12.

( 2 ) OJ L 220, 30. 8. 1993, p. 1.