Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec (European Committee for Standardization/European Committee for Electrotechnical Standardization) are requested to specify the following system(s) of attestation of conformity in the relevant harmonized standard(s):
Product(s) | Intended use(s) | Level(s) or class(es) of reaction to fire | Attestation of conformity system(s)
Unfaced, overlaid and veneered or coated wood-based panels | For structural elements in internal or external applications | A1 (1), A2 (1), B (1), C (1) | 1 (3)
A1 (2), A2 (2), B (2), C (2), D, E, (A1 to E) (), F | —
2 + (4)
Products/materials for which a clealy identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
Products/materials not covered by footnote 1 .
Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC.
System 1: see Annex III, point 2 (i) to Directive 89/106/EEC, without audit-testing of samples.
System 2 +: see Annex III, point 2 (ii), first possibility, of Directive 89/106/EEC including certification of the factory production control by an approved body on the basis of initial inspections of factory and of factory production control as well as of continuous surveillance assessment and approval of factory production control
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristics, see Article 2 (1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents. In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
PRODUCT FAMILY
WOOD-BASED PANELS (2/2)
Systems of attestation of conformity
For the product(s) and intended use(s) listed below, CEN/Cenelec (European Committee for Standardization/European Committee for Electrotechnical Standardization) are requested to specify the following system(s) of attestation of conformity in the relevant harmonized standard(s):
Product(s) | Intended use(s) | Level(s) or class(es) of reaction to fire | Attestation of conformity system(s)
Unfaced, overlaid and veneered or coated wood-based panels | For non structural elements in internal or external applications | A1 (1), A2 (1), B (1), C (1) | 1 (4)
A1 (2), A2 (2), B (2), C (2), D, E | —
3 (5)
(A1 to E) (3), F | —
4 (6)
Products/materials for which a clealy identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
Products/materials not covered by footnote 1 .
Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC.
System 1: See Annex III, point 2 (i) to Directive 89/106/EEC, without audit-testing of samples.
System 3: See Annex III, point 2 (ii) to Directive 89/106/EEC, second possibility.
System 4: See Annex III, point 2 (ii) to Directive 89/106/EEC, third possibility.
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic, see Article 2 (1) of Directive 89/106/EEC and, where applicable, clause 1.2.3 of the interpretative documents. In those cases the verfication of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.
( 1 ) OJ No L 40, 11. 2. 1989, p. 12.
( 2 ) OJ No L 220, 30. 8. 1993, p. 1.
( 3 ) Products/materials not covered by footnote 2 in Annex II.
( 4 ) Products/materials not covered by footnote 2 in Annex II.
( 5 ) Products/materials not covered by footnote 2 in Annex II.
( 6 ) Products/materials not covered by footnote 2 in Annex II.
( 7 ) Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
( 8 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 9 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 10 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
( 11 ) Products/materials for which a clearly identifiable stage in the production process results in an improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).