The recycling of PGMs takes two forms:
Closed circuit
When PGMs are used in industrial catalysts the metals need to be refurbished after a certain period of operation because of the contamination that takes place. Losses occur to a small extent (some 2 %) in either the recycling or the industrial process. The metal is toll-refined for the benefit of the plant operator and accordingly its ownership does not change because of the recycling. Consequently new demand from industry is either from expanded capacity or when these small losses are replaced.
Recycling from scrap
PGMs are recycled in small quantities from scrap, such as printed circuits, but by far the most important source of scrap is from autocatalysts. Johnson Matthey estimates that western world PGM recovery from autocatalysts is as follows.
Table 4 Total consumption of PGMs for autocatalysts and related scrap recovery