ANNEX I PROCEDURE FOR THE SAMPLING OF QUICK-FROZEN FOODS INTENDED FOR HUMAN CONSUMPTION, Directive (EU) 1992/2

In forcesince 13 Jan 1992
1.

Selection of packages for inspection

The type and quantity of packages selected shall be such that their temperature is representative of the warmest points of the consignment inspected.

1.1. Cold-storage

Samples should be selected from several critical points in the cold store, for example: near the doors (upper and lower levels), near the centre of the cold store (upper and lower levels), and near to the air return of the cooling unit. The duration of storage of any products should be taken into account (for the stabilization of the temperature).

1.2. Transport

(a)

Where it is necessary to select samples during transport:

Select from the top and the bottom of the consignment adjacent to the opening edge of each door or pair of doors.

(b)

Sampling during unloading:

Choose four samples from amongst the following critical points:

–

top and bottom of the consignment adjacent to the opening edge of doors,

–

top rear corners of the consignment (at a point as far away from the refrigeration unit as possible),

–

centre of the consignment,

–

centre of the front surface of the consignment (as close as possible to the refrigeration unit),

–

top and bottom corners of the front surface of the consignment (as close as possible to the return air to the refrigeration unit).

1.3. Retail display cabinets

A sample must be selected for testing from each of three locations representative of the warmest points within the retail display cabinet used.