Art. 1 Decision No 2/2021 of the Community/Switzerland Inland Transport Committee of 17 Decembe…

In forcesince 17 Dec 2021

Section 4 of Annex 1 to the Agreement is amended as follows: The date of ‘31 December 2021’, by which the compatibility of the following Swiss national rules with the corresponding Union technical specifications for interoperability should have been reviewed, is replaced by ‘31 December 2022’ for the following provisions:

In relation to Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the ‘rolling stock – locomotives and passenger rolling stock’ subsystem of the rail system in the European Union:

CH-TSI LOC&PAS-009 (version 1.0 of June 2015)

CH-TSI LOC&PAS-019 (version 2.0 of June 2019)

CH-TSI LOC&PAS-020 (version 2.0 of June 2019)

CH-TSI LOC&PAS-025 (version 2.0 of June 2019)

CH-TSI LOC&PAS-027 (version 2.0 of June 2019)

CH-TSI LOC&PAS-031 (version 2.1 of November 2020)

CH-TSI LOC&PAS-035 (version 2.1 of November 2020)

CH-TSI LOC&PAS-036 (version 2.0 of June 2019)

CH-TSI LOC&PAS-037 (version 1.0 of June 2019).

In relation to Commission Regulation (EU) 2016/919 of 27 May 2016 on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union:

CH-TSI CCS-006 (version 2.1 of November 2020)

CH-TSI CCS-019 (version 3.0 of November 2020)

CH-TSI CCS-026 (version 2.1 of November 2020)

CH-TSI CCS-032 (version 2.1 of November 2020)

CH-TSI CCS-033 (version 1.1 of November 2020)

CH-TSI CCS-035 (version 1.0 of June 2019)

CH-TSI CCS-038 (version 1.1 of November 2020)

CH-CSM-RA-001 (version 1.0 of June 2019)

CH-CSM-RA-002 (version 1.0 of June 2019).