, The Natural Mineral Water, Spring Water and Bottled Drinking Water (Wales) Regulations 2…

In forcesince 28 Nov 2015

Table 1

Prescribed methods of analysis

1 Use the following method to make m-CP agar:

Parameter | Method

Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar1 at 44 ±1ºC for 21± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.

Coliform bacteria | BS-EN ISO 9308-1

Colony count 22ºC – enumeration of culturable microorganisms | BS-EN ISO 6222

Colony count 37ºC – enumeration of culturable microorganisms | BS-EN ISO 6222

Enterococci | BS-EN ISO 7899-2

Escherichia coli (E. Coli) | BS-EN ISO 9308-1

Pseudomonas aeruginosa | BS-EN ISO 12780

Make a basal medium consisting of— |

Tryptose | 30.0g

Yeast extract | 20.0g

Sucrose | 5.0g

L-cysteine hydrochloride | 1.0g

MgSO4.7H2O | 0.1g

Bromocresol purple | 40.0mg

Agar | 15.0g

Water | 1,000.0ml

Dissolve the ingredients of basal medium, adjust pH to 7.6 and autoclave at 121ºC for 15 minutes. Allow the medium to cool.

Dissolve— |

D-cycloserine | 400.0mg

Polymyxine-B sulphate | 25.0mg

Indoxl-β-D-glucoside | 60.0mg

into 8ml sterile water and add it to the medium. | Add to the medium—

Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml

Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml

Table 2

Prescribed performance characteristics for methods of analysis

1 The method of analysis should determine total cyanide in all forms.

2 Oxidation should be carried out for 10 minutes at 100°C under acid conditions using permanganate.

3 The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.

4 The performance characteristics apply to the individual substances specified at 25% of the parametric value in Table B in Part 2, Schedule 7.

5 The performance characteristics apply to the individual substance specified at 50% of the parametric value in Table B in Part 2, Schedule 7.

Parameters | Trueness % of prescribed concentration or value or specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification

Aluminium | 10 | 10 | 10

Ammonium | 10 | 10 | 10

Antimony | 25 | 25 | 25

Arsenic | 10 | 10 | 10

Benzene | 25 | 25 | 25

Benzo(a)pyrene | 25 | 25 | 25

Boron | 10 | 10 | 10

Bromate | 25 | 25 | 25

Cadmium | 10 | 10 | 10

Chloride | 10 | 10 | 10

Chromium | 10 | 10 | 10

Conductivity | 10 | 10 | 10

Copper | 10 | 10 | 10

Cyanide1 | 10 | 10 | 10

1,2-dichloroethane | 25 | 25 | 10

Fluoride | 10 | 10 | 10

Iron | 10 | 10 | 10

Lead | 10 | 10 | 10

Manganese | 10 | 10 | 10

Mercury | 20 | 10 | 20

Nickel | 10 | 10 | 10

Nitrate | 10 | 10 | 10

Nititre | 10 | 10 | 10

Oxidisability2 | 25 | 25 | 10

Pesticides and related products3 | 25 | 25 | 25

Polycyclic aromatic hydrocarbons4 | 25 | 25 | 25

Selenium | 10 | 10 | 10

Sodium | 10 | 10 | 10

Sulphate | 10 | 10 | 10

Tetrachloroethene5 | 25 | 25 | 10

Trichloroethene5 | 25 | 25 | 10

Trihalomethanes4 | 25 | 25 | 10