*
Use the following method to make m-CP agar :
Make a basal medium consisting of—
Tryptose | 30.0g
Yeast extract | 20.0g
Sucrose | 5.0g
L-cysteine hydrochloride | 1.0g
MgSO4.7H2O | 0.1g
Bromocresol purple | 40.0mg
Agar | 15.0g
Water | 1,000.0ml
Dissolve the ingredients of the basal medium, adjust pH to 7.6 and autoclave at 121°C for 15 minutes. Allow the medium to cool.
Dissolve—
D-cycloserine | 400.0mg
Polymyxine-B sulphate | 25.0mg
Indoxyl-β-D-glucoside | 60.0mg
into 8ml sterile water and add it to the medium.
Add to the medium—
Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml
Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml
Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar* at 44 ± 1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.
Table 2
Prescribed performance characteristics for methods of analysis
Parameters | Trueness % of prescribed concentration or value or specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification
Notes:
(i)
The method of analysis should determine total cyanide in all forms.
(ii)
The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.
(iii)
The performance characteristics apply to the individual substances specified at 25% of the parametric value in Part I of Table B in Schedule 1.
(iv)
The performance characteristics apply to the individual substances specified at 50% of the parametric value in Part I of Table B in Schedule 1.
(v)
The performance characteristics apply to the prescribed value of 4 NTU.
(vi)
The performance characteristics apply to the specification of 1 NTU for surface waters or ground waters influenced by surface water.
Aluminium | 10 | 10 | 10
Ammonium | 10 | 10 | 10
Antimony | 25 | 25 | 25
Arsenic | 10 | 10 | 10
Benzene | 25 | 25 | 25
Benzo(a)pyrene | 25 | 25 | 25
Boron | 10 | 10 | 10
Bromate | 25 | 25 | 25
Cadmium | 10 | 10 | 10
Chloride | 10 | 10 | 10
Chromium | 10 | 10 | 10
Colour | 10 | 10 | 10
Conductivity | 10 | 10 | 10
Copper | 10 | 10 | 10
Cyanide | 10 | 10 | 10
1,2-dichloroethane | 25 | 25 | 10
Fluoride | 10 | 10 | 10
Iron | 10 | 10 | 10
Lead | 10 | 10 | 10
Manganese | 10 | 10 | 10
Mercury | 20 | 10 | 20
Nickel | 10 | 10 | 10
Nitrate | 10 | 10 | 10
Nitrite | 10 | 10 | 10
Pesticides and related products | 25 | 25 | 25
Polycyclic aromatic hydrocarbons | 25 | 25 | 25
Selenium | 10 | 10 | 10
Sodium | 10 | 10 | 10
Sulphate | 10 | 10 | 10
Tetrachloroethene | 25 | 25 | 10
Tetrachloromethane | 20 | 20 | 20
Trichloroethene | 25 | 25 | 10
Trihalomethanes: | | |
Total | 25 | 25 | 10
Turbidity | 10 | 10 | 10
Turbidity | 25 | 25 | 25