Commodity code (1) | Description (2)
4401 21 | Coniferous wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes)
4401 22 10 | Wood in chips or particles, of eucalyptus
4401 22 90 | Wood in chips or particles (excluding those of a kind used principally for dying or tanning purposes, coniferous wood and eucalyptus)
4403 11 | Wood in the rough, treated with paint, stains, creosote or other preservatives, coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.)
4403 12 | Wood in the rough, treated with paint, stains, creosote or other preservatives, non-coniferous (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.)
4403 21 10 | Sawlogs of pine “Pinus spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 21 90 | Pine “Pinus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 22 | Pine “Pinus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 23 10 | Sawlogs of fir “Abies spp.” and spruce “Picea spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 23 90 | Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 24 | Fir “Abies spp.” and spruce “Picea spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 25 10 | Sawlogs, coniferous, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 25 90 | Coniferous wood in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce; sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 26 | Coniferous wood in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding pine, fir and spruce, and rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 41 | Dark red meranti, light red meranti and meranti bakau wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 10 | Sapelli, acajou d’Afrique and iroko in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 35 | Okoumé and sipo in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 49 85 | Tropical wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding acajou d’Afrique, iroko, sapelli, okoumé and sipo; rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 91 | Oak “Quercus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 93 | Beech “Fagus spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 94 | Beech “Fagus spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 95 10 | Sawlogs of birch “Betula spp.”, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared
4403 95 90 | Birch “Betula spp.” in the rough, of which any cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding sawlogs; wood in the form of railway sleepers; wood cut into beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 96 | Birch “Betula spp.” in the rough, of which no cross-sectional dimension is =>15 cm, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 97 | Poplar and aspen “Populus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 98 | Eucalyptus “Eucalyptus spp.” in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood in the form of railway sleepers; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives)
4403 99 | Wood in the rough, whether or not stripped of bark or sapwood, or roughly squared (excluding rough-cut wood for walking sticks, umbrellas, tool shafts and the like; wood cut into boards or beams, etc.; wood treated with paint, stains, creosote or other preservatives, coniferous and tropical wood, oak, beech, birch, poplar, aspen and eucalyptus)
4408 31 11 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, end-jointed, whether or not planed or sanded, of dark red meranti, light red meranti and meranti bakau
4408 31 21 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed)
4408 31 25 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, of dark red meranti, light red meranti and meranti bakau (excluding end-jointed)
4408 31 30 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, whether or not spliced, of dark red meranti, light red meranti and meranti bakau (excluding planed, sanded or end-jointed)
4408 39 15 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, sanded, or end-jointed, whether or not planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose
4408 39 21 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding end-jointed)
4408 39 30 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 6 mm, of white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose (excluding planed, sanded or end-jointed)
4408 39 55 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose)
4408 39 70 | Small boards for the manufacture of pencils, of a thickness of <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para and palissandre de Rose)
4408 39 85 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed)
4408 39 95 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm but <= 6 mm, of tropical wood (excluding white lauan, sipo, limba, okoumé, obeche, acajou d’Afrique, sapelli, virola, mahogany “Swietenia spp.”, palissandre de Rio, palissandre de Para, palissandre de Rose, and planed, sanded or end-jointed)
4408 90 15 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, of a thickness of <= 6 mm, planed, sanded or end-jointed (excluding tropical and coniferous wood)
4408 90 35 | Small boards for the manufacture of pencils, of wood, of a thickness of <= 6 mm (excluding tropical and coniferous wood)
4408 90 85 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of <= 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood)
4408 90 95 | Sheets for veneering, including those obtained by slicing laminated wood, for plywood or for other similar laminated wood and other wood, sawn lengthwise, sliced or peeled, whether or not spliced, of a thickness of > 1 mm (excluding planed, sanded or end-jointed, and tropical and coniferous wood)
… | …
… | …
… | …
6804 22 50 | Millstones, grindstones, grinding wheels and the like, without frameworks, for sharpening, polishing, trueing or cutting, of artificial abrasives, with binder of other than of synthetic or artificial resin, ceramics or silicates (excluding of agglomerated synthetic or natural diamond, hand sharpening or polishing stones, perfumed pumice stones, and grinding wheels etc. specifically for dental drill engines)
… | …
8205 10 | Hand-operated drilling, threading or tapping hand tools
8205 20 | Hammers and sledge hammers with working parts of base metal
8205 30 | Planes, chisels, gouges and similar cutting tools for working wood
8205 40 | Hand-operated screwdrivers
8205 51 | Household hand tools, non-mechanical, with working parts of base metal, n.e.s.
8205 59 10 | Hand tools for masons, moulders, cement workers, plasterers and painters, of base metal, n.e.s.
8205 59 80 | Hand tools, including glaziers’ diamonds, of base metal, n.e.s.
8205 60 | Blowlamps and the like (excluding gas-powered blowlamps)
8205 70 | Vices, clamps and the like (excluding accessories for and parts of machine tools or water-jet cutting machines)
8205 90 10 | Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks
8205 90 90 | Sets of articles of two or more subheadings of heading 8205
8207 19 90 | Rock-drilling or earth-boring tools, interchangeable, with working parts of materials other than sintered metal carbide, cermets, diamond or agglomerated diamond
8207 20 10 | Interchangeable dies for drawing or extruding metal, with working parts of diamond or agglomerated diamond
8207 20 90 | Interchangeable dies for drawing or extruding metal, with working parts of materials other than diamond or agglomerated diamond
8207 30 10 | Interchangeable tools for pressing, stamping or punching, for working metal
8207 30 90 | Interchangeable tools for pressing, stamping or punching, for working materials other than metal
8207 40 10 | Tools for tapping metal, interchangeable
8207 40 30 | Tools for threading metal, interchangeable
8207 40 90 | Tools for tapping or threading materials other than metal, interchangeable
8207 50 10 | Tools for drilling, interchangeable, with working parts of diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring and tools for tapping)
8207 50 30 | Interchangeable masonry drills, with working parts of materials other than diamond or agglomerated diamond
8207 50 50 | Tools for drilling metal, interchangeable, with working parts of sintered metal carbide or cermets (excluding tools for tapping)
8207 50 60 | Tools for drilling, interchangeable, for working metal, with working parts of high speed steel (excluding tools for tapping)
8207 50 70 | Tools for drilling metal, interchangeable, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide, cermets or high speed steel (excluding tools for tapping)
8207 50 90 | Tools for drilling, interchangeable, for working materials other than metal, with working parts of materials other than diamond or agglomerated diamond (excluding tools for rock-drilling or earth-boring, wall boring and tools for tapping)
8207 70 31 | Interchangeable shank type tools for milling metal, with working parts of materials other than sintered metal carbide or cermets
8207 70 37 | Tools for milling, interchangeable, for working metal, with working part of materials other than sintered metal carbide or cermets (excluding shank-type)
8207 90 30 | Screwdriver bits of base metal
8207 90 50 | Interchangeable gear-cutting tools (excluding milling tools for gear-cutting)
8207 90 71 | Interchangeable tools for hand tools, whether or not power-operated, or for machine tools, for working metal, with working parts of sintered metal carbide or cermets, n.e.s.
8207 90 78 | Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances or in machine tools, for working materials other than metal, with working part of sintered metal carbides or cermets, n.e.s.
8207 90 91 | Tools, interchangeable, for use in mechanical or non-mechanical hand-held appliances, or for machine tools, for working metal, with working parts of materials other than diamond, agglomerated diamond, sintered metal carbide or cermets, n.e.s.
8209 00 20 | Inserts, indexable, for tools, unmounted, of sintered metal carbide or cermets
8209 00 80 | Plates, sticks, tips and the like for tools, unmounted, of sintered metal carbides or cermets (excluding indexable inserts)
8402 11 | Watertube boilers with a steam production > 45 t/hour
8405 10 | Producer gas or water gas generators, with or without their purifiers; acetylene gas generators and similar water process gas generators, with or without their purifiers (excluding coke ovens, electrolytic process gas generators and carbide lamps)
8406 10 | Steam and other vapour turbines for marine propulsion
8406 81 | Steam and other vapour turbines, of an output > 40 MW (excluding those for marine propulsion)
8406 82 | Steam and other vapour turbines, of an output <= 40 MW (excluding those for marine propulsion)
8410 11 | Hydraulic turbines and water wheels, of a power <= 1,000 kW (excluding hydraulic power engines and motors of heading 8412)
8410 13 | Hydraulic turbines and water wheels, of a power > 10,000 kW (excluding hydraulic power engines and motors of heading 8412)
8410 90 | Parts of hydraulic turbines and water wheels including regulators
8412 31 | Pneumatic power engines and motors, linear-acting, “cylinders”
8412 80 10 | Steam or other vapour power engines (excluding steam or other vapour generating boilers and turbines)
8412 80 80 | Engines and motors, non-electrical (excluding steam turbines, internal combustion piston engine, hydraulic turbines, water wheels, gas turbines, reaction engines, hydraulic power engines and motors, pneumatic power engines and motors, steam or other vapour power engines and electric motors)
8412 90 20 | Parts of reaction engines, n.e.s. (excluding of turbojets)
8412 90 40 | Parts of hydraulic power engines and motors, n.e.s.
8412 90 80 | Parts of other engines and motors, n.e.s.
8415 20 | Air conditioning machines of a kind used for persons, in motor vehicles
8415 81 | Air conditioning machines incorporating a refrigerating unit and a valve for reversal of the cooling-heat cycle “reversible heat pumps” (excluding of a kind used for persons in motor vehicles and self-contained or “split-system” window or wall air conditioning machines)
8415 82 | Air conditioning machines incorporating a refrigerating unit but without a valve for reversal of the cooling-heat cycle (excluding of a kind used for persons in motor vehicles, and self-contained or “split-system” window or wall air conditioning machines)
8415 90 | Parts of air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, n.e.s.
8418 50 11 | Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for frozen food storage
8418 50 19 | Refrigerated show-cases and counters, with a refrigerating unit or evaporator, for non-frozen food storage
8418 50 90 | Refrigerating furniture with a refrigerating unit or evaporator (excluding combined refrigerator-freezers, with separate external doors, household refrigerators, refrigerated show-cases and counters)
8418 91 | Furniture designed to receive refrigerating or freezing equipment
8418 99 10 | Evaporators and condensers for refrigerating equipment (excluding for household refrigerators)
8418 99 90 | Parts of refrigerating or freezing equipment and heat pumps, n.e.s.
8419 11 | Instantaneous gas water heaters (excluding boilers or water heaters for central heating)
8419 33 | Dryers - lyophilisation apparatus, freeze drying units and spray dryers
8419 35 | Other dryers, for wood, paper pulp, paper or paperboard
8419 39 | Dryers n.e.s.
… | …
… | …
… | …
… | …
… | …
… | …
8422 90 90 | Parts of packing or wrapping machinery and of other machinery of heading 8422, n.e.s. (excluding parts of dishwashing machines)
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
… | …
8424 20 | Spray guns and similar appliances (other than electrical machines, appliances and other devices for spraying molten metals or metal carbides of heading 8515, sand blasting machines and similar jet projecting machines)
8424 30 01 | Water cleaning appliances with built-in motor, with heating device
8424 30 08 | Water cleaning appliances with built-in motor, without heating device
8424 30 10 | Steam or sand blasting machines and similar jet projecting machines, compressed air operated
8424 30 90 | Steam or sand blasting machines and similar jet projecting machines (excluding compressed air operated and water cleaning appliances with built-in motor and appliances for cleaning special containers)
8425 19 | Pulley tackle and hoists (other than skip hoists or hoists of a kind used for raising vehicles), non-powered by electric motor
8425 31 | Winches and capstans powered by electric motor
8425 39 | Winches and capstans, non-powered by electric motor
8425 41 | Built-in jacking systems of a type used in garages
8425 42 | Jacks and hoists, hydraulic (excluding built-in jacking systems used in garages)
8425 49 | Jacks and hoists of a kind used for raising vehicles, not hydraulic
8426 11 | Overhead travelling cranes on fixed support
8426 19 | Overhead travelling cranes, transporter cranes, gantry cranes, bridge cranes and mobile lifting frames (excluding overhead travelling cranes on fixed support, mobile lifting frames on tyres, straddle carriers and portal or pedestal jib cranes)
8426 20 | Tower cranes
8426 30 | Portal or pedestal jib cranes
8426 41 | Mobile cranes and works trucks fitted with a crane, self-propelled, on tyres (excluding wheel-mounted cranes, mobile lifting frames on tyres and straddle carriers)