The Recreational Craft Regulations 2017
- 8Duty to ensure products comply with the essential requirements
- 9Technical documentation and conformity assessment
- 10Declaration of conformity and UK marking
- 11Duty of manufacturers to retain technical documentation and EU declaration of conformity
- 12Compliance procedures for series production
- 13Duty of manufacturers to ensure products are labelled
- 14Duty to provide information
- 15Instructions and safety information
- 16Duty to take action in respect of product placed on the market which is considered not to be in conformity
- 17Provision of information and co-operation
- 18Prohibition on placing products on the market
- 19Requirements that must be satisfied before an importer places a product on the market
- 20Duty not to place a product on the market where an importer suspects that it is not in conformity
- 21Duty of importer to ensure products are labelled
- 22Instructions and safety information
- 23Storage and transport
- 24Duty to take action in respect of product placed on the market which is considered not to be in conformity
- 25Duty of importers to retain technical documentation and EU declaration of conformity
- 26Provision of information and co-operation
- 27Duty to act with due care
- 28Making available on the market
- 29Duty not to make a product available on the market where a distributor suspects that it is not in conformit
- 30Storage and transport
- 31Duty to take action in respect of watercraft placed on the market which is considered not to be in conformi
- 32Provision of information and co-operation
chapter IMPORTERS AND DISTRIBUTORS
chapter MANUFACTURERS AND IMPORTERS
chapter PRIVATE IMPORTERS AND ECONOMIC OPERATORS
chapter AUTHORISED REPRESENTATIVES
chapter SUPPLEMENTARY REQUIREMENTS FOR CERTAIN CONFORMITY ASSESSMENTS
- 49Conformity assessments carried out under Module B (EU-type examination)
- 50Conformity assessments carried out under Module A1 (internal production control plus supervised product tes
- 51Conformity assessments carried out under Module F (conformity to type based on product verification)
- 52Conformity assessments carried out under Module C (conformity to type based on internal production control)
- 53Declaration of conformity
- 54UK marking
- 54aUK(NI) indication
- 54bRegister of notified bodies established in the United Kingdom
- 55Approved bodies
- 56Approval of conformity assessment bodies
- 57Presumption of conformity of approved bodies
- 58Monitoring of approved bodies
- 59Restriction, suspension or withdrawal of approval
- 60Notice of proposed restriction, suspension or withdrawal of approval
- 61Operational requirements of approved bodies
- 62Subsidiaries and contractors
- 63Register of approved bodies
- 64Authorisation of UK national accreditation body
- 65Designation of market surveillance authorities
- 66Enforcement
- 67Enforcement powers
- 68Evaluation of a product presenting a risk
- 69Enforcement action in respect of products that are not in conformity and which present a risk
- 70EU Safeguard procedure
- 71Enforcement action in respect of formal non-compliance
- 72Restrictive measures
- 73Offences
- 74Penalties
- 74aPenalty in relation to the UK(NI) indication
- 75Defence of due diligence
- 76Liability of persons other than the principal offender
- 77Service of documents
- 78Recovery of expenses of enforcement
- 79Action by enforcing authority
- 80Appeals against notices
- 81Appropriate court for appeals against notices
- 82Time limit for commencement of proceedings
- 83Compensation
- 84Amendment to the Consumer Rights Act 2015
- 85Amendment to the Enterprise Act 2002 (Part 9 Restrictions on Disclosure of Information) (Specification) Ord
- 86Amendment to the Legislative and Regulatory Reform (Regulatory Functions) Order 2007
- 87Amendment to the Co-ordination of Regulatory Enforcement (Regulatory Functions in Scotland and Northern Ire
- 88Review
- 89Transitional provisions
- 89aTransitional provisions in relation to EU Exit
- 90Revocations and savings
- Schedule 1 (Annex I of the Directive)
- Schedule 2 (Annex II of the Directive) COMPONENTS OF WATERCRAFT
- Schedule 3 (Annex III of the Directive) DECLARATION BY THE MANUFACTURER OR THE IMPORTER OF THE PARTLY COMPLETE
- Schedule 4 (Annex IV of the Directive) EU DECLARATION OF CONFORMITY No xxxxx
- Schedule 5 (Annex V of the Directive) EQUIVALENT CONFORMITY BASED ON POST-CONSTRUCTION ASSESSMENT (MODULE PCA)
- Schedule 6 (Annex VI of the Directive) SUPPLEMENTARY REQUIREMENTS WHEN INTERNAL PRODUCTION CONTROL PLUS SUPERV
- Schedule 7 (Annex VII of the Directive) CONFORMITY OF PRODUCTION ASSESSMENT FOR EXHAUST AND NOISE EMISSIONS
- Schedule 8 (Annex VIII of the Directive) SUPPLEMENTARY PROCEDURE TO BE APPLIED UNDER CONFORMITY TO TYPE BASED
- Schedule 9 (Annex IX of the Directive) TECHNICAL DOCUMENTATION
- Schedule 10 EU-type examination
MODULE A Internal production control
MODULE A1 Internal production control plus supervised product testing
- 1Type examination
- 2How type examination must be carried out, etc.
- 3Application for type examination
- 4Examination, etc. by approved body
- 5Evaluation report
- 6Type examination certificate
- 7Changes
- 8Approved body's duties in respect of type examination certificates
- 9Manufacturer's duties in respect of type examination certificates
MODULE C Conformity to type based on internal production control
MODULE C1 Conformity to type based on internal production control plus supervised product testing
MODULE D Conformity to type based on quality assurance of the production process
- 1Conformity to type based on quality assurance of the production process
- 2Manufacturing
- 3Quality system
- 4Surveillance under the responsibility of the approved body
- 5UK marking and declaration of conformity
- 6Manufacturer's duty to keep application, etc.
- 7Approved body's duties in respect of quality system approvals
MODULE E Conformity to type based on product quality assurance
MODULE F Conformity to type based on product verification
- 1Conformity to type based on product verification
- 2Manufacturing
- 3Verification
- 4Verification of conformity by examination and testing of every product
- 5Statistical verification of conformity
- 6UK marking and declaration of conformity
- 7Affixing of approved body's identification number during manufacturing process
- 8Authorised representative
MODULE G Conformity based on unit verification
MODULE H Conformity based on full quality assurance
Source: legislation.gov.uk (The National Archives), UK legislation with its point-in-time versions. Official publication. Reuse: Open Government Licence v3.0.