Table 1
Prescribed methods of analysis
Parameter | Method
Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar* at 44 ± 1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.
Coliform bacteria and Escherichia coli (E. coli) | BS-EN ISO 9308-1 and BS-EN ISO 9308-2
Colony count 22°C-enumeration of
culturable microorganisms
BS-EN ISO 6222
Colony count 37°C-enumeration of
culturable microorganisms
BS-EN ISO 6222
Enterococci | BS-EN ISO 7899-2
Pseudomonas aeruginosa | BS-EN ISO 12780
*Use the following method to make m-CP agar:
Make a basal medium consisting of—
Tryptose | 30.0g
Yeast extract | 20.0g
Sucrose | 5.0g
L-cysteine hydrochloride | 1.0g
MgSO4.7H2O | 0.1g
Bromocresol purple | 40.0mg
Agar | 15.0g
Water | 1,000.0ml
Dissolve the ingredients of the basal medium; adjust pH to 7.6 and autoclave at 121°C for 15 minutes. Allow the medium to cool.
Dissolve—
D-cycloserine | 400.0mg
Polymyxine-B sulphate | 25.0mg
Indoxyl-β-D-glucoside | 60.0mg
into 8ml sterile water and add it to the medium.
Add to the medium—
Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml
Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml
Table 2
Prescribed performance characteristics for methods of analysis
1 The method of analysis should determine total cyanide in all forms
2 The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned.
3 The performance characteristics apply to the individual substances specified at 25% of the parametric value in Part I of Table B in Part 1 of Schedule 1.
4 The performance characteristics apply to the individual substances specified at 50% of the parametric value in Part I of Table B in Part 1 of Schedule 1.
5 The performance characteristics apply to the prescribed value of 4 NTU.
6 The performance characteristic apply to the specification of 1 NTU for surface waters or ground waters influenced by surface water.
Parameters | Trueness % of prescribed concentration or value or specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification
Aluminium | 10 | 10 | 10
Ammonium | 10 | 10 | 10
Antimony | 25 | 25 | 25
Arsenic | 10 | 10 | 10
Benzene | 25 | 25 | 25
Benzo(a)pyrene | 25 | 25 | 25
Boron | 10 | 10 | 10
Bromate | 25 | 25 | 25
Cadmium | 10 | 10 | 10
Chloride | 10 | 10 | 10
Chromium | 10 | 10 | 10
Colour | 10 | 10 | 10
Conductivity | 10 | 10 | 10
Copper | 10 | 10 | 10
Cyanide1 | 10 | 10 | 10
1,2-dichloroethane | 25 | 25 | 10
Fluoride | 10 | 10 | 10
Iron | 10 | 10 | 10
Lead | 10 | 10 | 10
Manganese | 10 | 10 | 10
Mercury | 20 | 10 | 20
Nickel | 10 | 10 | 10
Nitrate | 10 | 10 | 10
Nitrite | 10 | 10 | 10
Pesticides and related products2 | 25 | 25 | 25
Polycyclic aromatic hydrocarbons3 | 25 | 25 | 25
Selenium | 10 | 10 | 10
Sodium | 10 | 10 | 10
Sulphate | 10 | 10 | 10
Tetrachloroethene4 | 25 | 25 | 10
Tetrachloromethane | 20 | 20 | 20
Trichloroethene4 | 25 | 25 | 10
Trihalomethanes: Total3 | 25 | 25 | 10
Turbidity5 | 10 | 10 | 10
Turbidity6 | 25 | 25 | 25