The Pressure Equipment (Safety) Regulations 2016
- 1Citation and commencement
- 2Interpretation
- 2aDesignated standard
- 3Pressure equipment and assemblies
- 4Excluded pressure equipment and assemblies
- 5Exception for trade fairs, exhibitions and demonstrations
- 6Pressure equipment and assemblies subject to essential safety requirements
- 7
- 8Requirement for pressure equipment and assemblies to comply with sound engineering practice
- 8aPower to reclassify pressure equipment and assemblies
- 9Design and manufacture in accordance with essential safety requirements
- 10Technical documentation and conformity assessment
- 11Declaration of conformity and UK marking
- 12Duty to keep technical documentation and … declaration of conformity
- 13Labelling of pressure equipment and assemblies
- 14Instructions and safety information
- 15Compliance procedures for series production
- 16Monitoring
- 17Duty to take action in respect of pressure equipment or assemblies placed on the market which are considere
- 18Provision of information and cooperation
- 19Manufacturer's authorised representatives
- 20Prohibition on placing on the market pressure equipment or assemblies which are not in conformity
- 21Requirements which must be satisfied before an importer places pressure equipment or assemblies on the mark
- 22Prohibition on placing on the market pressure equipment or assemblies considered not to be in conformity wi
- 23Information identifying importer
- 24Instructions and safety information
- 25Storage and transport
- 26Monitoring
- 27Duty to take action in respect of pressure equipment or assemblies placed on the market considered not to b
- 28Retention of technical documentation and … declaration of conformity
- 29Provision of information and cooperation
- 30Duty to act with due care
- 31Requirements which must be satisfied before a distributor makes pressure equipment or assemblies available
- 32Storage and transport
- 33Prohibition on making available on the market where pressure equipment or assemblies are not considered to
- 34Duty to take action in respect of pressure equipment made available on the market which are not in conformi
- 35Provision of information and cooperation
- 36Cases in which obligations of manufacturers apply to importers and distributors
- 37Translation of … declaration of conformity
- 38Identification of economic operators
- 39Prohibition on improper use of UK marking
- 39aObligations which are met by complying with the obligations in the Directive
- 39bConformity assessment procedure obligation which is met by complying with the Directive.
- 39cFurther use of the UK marking
- 39dQualifying Northern Ireland Goods
- 51Approved bodies
- 52Recognised third party organisations
- 53User inspectorates
- 54Approval of conformity assessment bodies
- 55Approval of approved bodies
- 56Approval of recognised third party organisations
- 57Approval of user inspectorates
- 58Presumption of conformity of conformity assessment bodies
- 59Monitoring
- 60Restriction, suspension or withdrawal of approval (approved bodies and recognised third party organisations
- 61Restriction, suspension or withdrawal of approval (user inspectorates)
- 62Operational matters in relation to approved bodies, recognised third party organisations and user inspector
- 63Subsidiaries and contractors
- 64Register of approved bodies
- 65United Kingdom Accreditation Service
- 66Designation of market surveillance authority
- 67Enforcement
- 68Enforcement powers
- 69Exercise of enforcement powers
- 70Evaluation of pressure equipment or assemblies presenting a risk
- 71Enforcement action in respect of pressure equipment or assemblies which are not in conformity and which pre
- 72EU safeguard procedure
- 73Pressure equipment or assemblies which are in conformity, but present a risk
- 74Enforcement action in cases of formal non-compliance
- 75Restrictive measures
- 76Offences
- 77Penalties
- 78Defence of due diligence
- 79Liability of persons other than principal offender
- 80Time limit for prosecution of offences
- 81Service of documents
- 82Recovery of expenses of enforcement
- 83Action by enforcing authority
- 84Appeals against notices
- 85Appropriate court for appeals against notices
- 86Compensation
1 Module A: Internal Production Control
2 Module A2: Internal production control plus supervised pressure equipment checks at random
Type examination–production type
5 Module D: Conformity to type based on quality assurance in the production process
6 Module D1: Quality assurance of the production process
7 Module E: Conformity to type based on pressure equipment quality assurance
8 Module E1: Quality assurance of final pressure equipment inspection and testing
9 Module F: Conformity to type based on pressure equipment verification
10 Module G: Conformity based on unit verification
11 Module H: Conformity based on full quality assurance
12 Module H1: Conformity based on full quality assurance plus design examination
- 3General
- 4Design for adequate strength
- 5Calculation method
- 6Experimental design methods
- 7Provisions to ensure safe handling and operation
- 8Means of examination
- 9Means of draining and venting
- 10Corrosion or other chemical attack
- 11Wear
- 12Assemblies
- 13Provisions for filling and discharge
- 14Protection against exceeding the allowable limits of pressure equipment
- 15Safety accessories
- 16Pressure limiting devices
- 17Temperature monitoring devices
- 18External fire
5 SPECIFIC PRESSURE EQUIPMENT REQUIREMENTS
6 SPECIFIC QUANTITATIVE REQUIREMENTS FOR CERTAIN PRESSURE EQUIPMENT
- 1Amendment of the Provision and Use of Work Equipment Regulations 1998
- 2Amendment of the Provision and Use of Equipment at Work Regulations (Northern Ireland) 1999
- 3Amendment of the Pressure Systems Safety Regulations 2000
- 4Amendment of the Pressure Systems Safety Regulations (Northern Ireland) 2004
- 5Amendment of the Enterprise Act 2002 (Part 9 Restrictions on Disclosure of Information)(Specification) Order
- 6Amendment of the Legislative and Regulatory Reform (Regulatory Functions) Order 2007
- 7Amendment of the Legislative Reform (Health and Safety Executive) Order 2008
- 8Amendment of the Supply of Machinery (Safety) Regulations 2008
- 9Amendment of the Co-ordination of Regulatory Enforcement (Regulatory Functions in Scotland and Northern Irel
- 10Amendment of the Fluorinated Greenhouse Gases Regulations 2015
- 11Amendment of the Fluorinated Greenhouse Gases Regulations (Northern Ireland) 2015
- 12Amendment of the Consumer Rights Act 2015
Source: legislation.gov.uk (The National Archives), UK legislation with its point-in-time versions. Official publication. Reuse: Open Government Licence v3.0.