, The Private Water Supplies Regulations 2009 (revoked)

No longer in force

Table 1

Prescribed methods of analysis

*Use the following method to make m-CP agar:

Parameter | Method

Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar* at 44 ± 1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.

Coliform bacteria | BS-EN ISO 9308-1

Colony count 22°C-enumeration of

culturable microorganisms

BS-EN ISO 6222

Colony count 37°C-enumeration of

culturable microorganisms

BS-EN ISO 6222

Enterococci | BS-EN ISO 7899-2

Escherichia coli (E. coli) | BS-EN ISO 9308-1

Pseudomonas aeruginosa | BS-EN ISO 12780

Changed on 1 Jan 2010

*Use the following method to make m-CP agar:

* Use the following method to make m-CP agar: Make a basal medium consisting of— Tryptose | 30.0g Yeast extract | 20.0g Sucrose | 5.0g L-cysteine hydrochloride | 1.0g MgSO4.7H2O | 0.1g Bromocresol purple | 40.0mg Agar | 15.0g Water | 1,000.0ml Dissolve the ingredients of the basal medium, adjust pH to 7.6 and autoclave at 121°C for 15 minutes. Allow the medium to cool. Dissolve— D-cycloserine | 400.0mg Polymyxine-B sulphate | 25.0mg Indoxyl-β-D-glucoside | 60.0mg into 8ml sterile water and add it to the medium. Add to the medium— Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar* at 44 ± 1°C for 21 ± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.

| BS-EN ISO 6222

| BS-EN ISO 6222

Table 2 Prescribed performance characteristics for methods of analysis Parameters Trueness % of prescribed concentration or value or specification Precision % of prescribed concentration or value or specification Limit of detection % of prescribed concentration or value or specification Notes: (i) The method of analysis should determine total cyanide in all forms. (ii) The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned. (iii) The performance characteristics apply to the individual substances specified at 25% of the parametric value in Part 1 of Table B in Schedule 1. (iv) The performance characteristics apply to the individual substances specified at 50% of the parametric value in Part 1 of Table B in Schedule 1. (v) The performance characteristics apply to the prescribed value of 4 NTU. (vi) The performance characteristics apply to the specification of 1 NTU for surface waters or ground waters influenced by surface water. Aluminium | 10 | 10 | 10 Ammonium | 10 | 10 | 10 Antimony | 25 | 25 | 25 Arsenic | 10 | 10 | 10 Benzene | 25 | 25 | 25 Benzo(a)pyrene | 25 | 25 | 25 Boron | 10 | 10 | 10 Bromate | 25 | 25 | 25 Cadmium | 10 | 10 | 10 Chloride | 10 | 10 | 10 Chromium | 10 | 10 | 10 Colour | 10 | 10 | 10 Conductivity | 10 | 10 | 10 Copper | 10 | 10 | 10 Cyanide | 10 | 10 | 10 1,2-dichloroethane | 25 | 25 | 10 Fluoride | 10 | 10 | 10 Iron | 10 | 10 | 10 Lead | 10 | 10 | 10 Manganese | 10 | 10 | 10 Mercury | 20 | 10 | 20 Nickel | 10 | 10 | 10 Nitrate | 10 | 10 | 10 Nitrite | 10 | 10 | 10 Pesticides and related products | 25 | 25 | 25 Polycyclic aromatic hydrocarbons | 25 | 25 | 25 Selenium | 10 | 10 | 10 Sodium | 10 | 10 | 10 Sulphate | 10 | 10 | 10 Tetrachloroethene | 25 | 25 | 10 Tetrachloromethane | 20 | 20 | 20 Trichloroethene | 25 | 25 | 10 Trihalomethanes: Total | 25 | 25 | 10 Turbidity | 10 | 10 | 10 Turbidity | 25 | 25 | 25

  1. 1 Jan 2010 – 27 Jun 2016earlier wording
  2. 24 Nov 2009 – 1 Jan 2010earlier wording