, The Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations 1999

In forcesince 30 Jun 1999

TABLE A

{s001} Note(i) If silver is used in a water treatment process, 80 may be substituted for 10.

Column 1 | Column 2 | Column 3 | Column 4

Item | Parameters | Units of Measurement | Concentration or Value (maximum unless otherwise stated)

1.

| Colour | mg/l Pt/Co scale | 20

2.

| Turbidity (including suspended solids) | Formazin turbidity units | 4

3.

| Odour (including hydrogen sulphide) | Dilution number | 3 at 25°C

4.

| Taste | Dilution number | 3 at 25°C

5.

| Temperature | °C | 25

6.

| Sulphate | Mg SO4/l | 250

7.

| Magnesium | Mg Mg/l | 50

8.

| Sodium | Mg Na/l | 150

9.

| Potassium | Mg K/l | 12

10.

| Dry residues | Mg/l | 1500 (after drying at 180°C)

11.

| Nitrate | Mg NO3/l | 50

12.

| Nitrite | Mg NO2/l | 0.1

13.

| Ammonium (ammonia and ammonium ions) | Mg NH4/l | 0.5

14.

| Kjeldahl nitrogen | Mg N/l | 1

15.

| Oxidizability (permanganate value) | Mg O2/l | 5

16.

| Total organic carbon | Mg C/l | No significant increase over that normally observed

17.

| Dissolved or emulsified hydrocarbons (after extraction with petroleum ether); mineral oils | μg/l | 10

18.

| Phenols | μg C6H5OH/l | 0.5

19.

| Surfactants | μg/l (as lauryl sulphate) | 200

20.

| Aluminium | μg A1/l | 200

21.

| Iron | μg Fe/l | 200

22.

| Manganese | μg Mn/l | 50

23.

| Copper | μg Cu/l | 3000

24.

| Zinc | μg Zn/l | 5000

25.

| Phosphorus | μg P/l | 2200

26.

| Fluoride | μg F/l | 1500

27.

| Silver | μg Ag/l | 10 {s001}(i)

TABLE B

{s002}(i) The sum of the detected concentrations of individual substances.

{s003}(ii) The sum of the detected concentrations of fluoranthene, benzo 3.4 fluoranthene, benzo 11.12 fluoranthene, benzo 3.4 pyrene, benzo 1.12 perylene and indeno (1,2,3–cd) pyrene.

Column 1 | Column 2 | Column 3 | Column 4

Item | Parameters | Units of Measurement | Maximum Concentration

1.

| Arsenic | μg As/l | 50

2.

| Cadmium | μg Cd/l | 5

3.

| Cyanide | μg CN/l | 50

4.

| Chromium | μg Cr/l | 50

5.

| Mercury | μg Hg/l | 1

6.

| Nickel | μg Ni/l | 50

7.

| Selenium | μg Se/l | 10

8.

| Antimony | μg Sb/l | 10

9.

| Lead | μg Pb/l | 10

10.

|

Pesticides and related products:

(a)individual substances

μg/l | 0.1

(b)total substances {s002}(i)

μg/l | 0.5

11.

| Polycyclic aromatic Hydrocarbons {s003}(ii) | μg/l | 0.2

TABLE D

Column 1 | Column 2 | Column 3 | Column 4

Item | Parameters | Units of Measurement | Maximum Concentration or Value

1.

| Conductivity | μS/cm | 1500 at 20°C

2.

| Chloride | mg Cl/l | 400

3.

| Calcium | mg Ca/l | 250

4.

| Substances extractable in chloroform | mg/l dry residue | 1

5.

| Boron | μg B/l | 2000

6.

| Barium | μg Ba/l | 1000

7.

| Benzo 3.4 pyrene | ng/l | 10

8.

| Tetrachloromethane | μg/l | 3

9.

| Trichloroethene | μg/l | 30

10.

| Tetrachloroethene | μg/l | 10

Changed on 30 Jun 1999

{s001} Note(i) If silver is used in a water treatment process, 80 may be substituted for 10.

Note (i) If silver is used in a water treatment process, 80 may be substituted for 10.

27. | Silver | μg Ag/l | 10 {s001}(i)

{s002}(i) The sum of the detected concentrations of individual substances. {s003}(ii) The sum of the detected concentrations of fluoranthene, benzo 3.4 fluoranthene, benzo 11.12 fluoranthene, benzo 3.4 pyrene, benzo 1.12 perylene and indeno (1,2,3–cd) pyrene.

Notes (i) The sum of the detected concentrations of individual substances. (ii) The sum of the detected concentrations of fluoranthene, benzo 3.4 fluoranthene, benzo 11.12 fluoranthene, benzo 3.4 pyrene, benzo 1.12 perylene and indeno (1,2,3–cd) pyrene.

(a)individual substances | μg/l | 0.1 (b) total substances | {s002}(i) μg/l | 0.5 11. | Polycyclic aromatic Hydrocarbons | μg/l | 0.2 TABLE C Column 1 | Column 2 | Column 3 | Column 4 Item | Parameters | Units of Measurement | Maximum Concentration Notes (i) Analysis by multiple tube method. (ii) The total viable colony count should be measured within 12 hours of bottling with the sample water being kept at a constant temperature during that 12-hour period. Any increase in the total viable colony count of the water between 12 hours after bottling and the time of sale shall not be greater than that normally expected. 1. | Total coliforms | number/100 ml | 0 2. | Faecal coliforms | number/100 ml | 0 3. | Faecal streptococci | number/100 ml | 0 4. | Sulphite-reducing clostridia | number/20 ml | ≤1 5. | Colony counts | number/1 ml at 22°C | 100 number/1 ml at 37°C | 20{s003}(ii) | μg/l | 0.2

  1. 30 Jun 1999 – todayin force
  2. 3 Jun 1999 – 30 Jun 1999earlier wording