The Road Vehicles (Construction and Use) Regulations 1986
A DIMENSIONS AND MANOEUVRABILITY
- 7Length
- 8Width
- 9Height
- 10Indication of overall travelling height
- 10aWarning devices where certain high level equipment is fitted to a vehicle
- 10bVehicles to which regulation 10A applies
- 10cInterpretation of regulations 10A and 10B
- 11Overhang
- 12Minimum ground clearance
- 13Turning circle—buses
- 13aTurning circle—articulated vehicles other than those incorporating a car transporter
- 13bTurning circle—articulated vehicles incorporating a car transporter
- 13cTurning circle—heavy motor car
- 14Connecting sections and direction-holding of articulated buses
- 15Braking systems of certain vehicles first used on or after 1st April 1983
- 16Braking systems of vehicles to which regulation 15 does not apply
- 17Vacuum or pressure brake warning devices
- 17aCouplings on trailer pneumatic braking systems
- 18Maintenance and efficiency of brakes
- 18aReview of regulation 18
- 19Application of brakes of trailers
C WHEELS, SPRINGS, TYRES AND TRACKS
- 46Seat belt anchorage points
- 47Seat belts
- 48Maintenance of seat belts and anchorage points
- 48aMinibuses and coaches to be fitted with additional seat belts when used in certain circumstances
- 49Rear under-run protection
- 50Maintenance of rear under-run protective device
- 51Sideguards
- 52Maintenance of sideguards
- 53Mascots
- 53aStrength of superstructure
- 53bAdditional exits from double-decked coaches
- 53cAlternative means of compliance
- 54Silencers-general
- 55Noise limits—certain vehicles with 3 or more wheels—general
- 55aNoise limits—certain vehicles first used on or after 1st October 1996—general
- 56Noise limits—agricultural motor vehicles and industrial tractors
- 57Noise limits construction requirements relating to motor cycles
- 57aExhaust systems motor cycles
- 57bNoise limits maintenance requirements relating to motor cycles
- 58Noise limits—vehicles not subject to regulations 55 to 57, first used on or after 1st April 1970
- 59Exceptions to regulations 55 to 57B
- 60Radio interference suppression
- 61Emission of smoke, vapour, gases, oily substances etc
- 61aEmission of smoke, vapour, gases, oily substances etc—further requirements for certain motor vehicles firs
- 61bRetrofitting and refilling of certain air conditioning systems
- 61cEnd-of-series exemption
- 61dReview of regulations 61 to 61B
- 62Closets etc
- 63Wings
- 64Spray suppression devices
- 65Maintenance of spray suppression devices
- 66Plates for goods vehicles and buses
- 67Vehicle identification numbers
- 68Plates—agricultural trailed appliances
- 69Plates—motor cycles
- 70Ministry plates
- 70aSpeed limiters—plates
- 70bPlate relating to dimensions
- 71Marking of weights on certain vehicles
- 71aMarking of date of manufacture of trailers
- 72Additional markings
- 73Test date discs
- 74Testing and Inspection
- 75Maximum permitted laden weight of a vehicle
- 76Maximum permitted laden weight of a vehicle and trailer, other than an articulated vehicle
- 77Maximum permitted laden weight of an articulated vehicle
- 78Maximum permitted wheel and axle weights
- 79Maximum permitted weights for certain closely-spaced axles etc
- 79aSaving for the Road Vehicles (Authorised Weight) Regulations 1998
- 80Over-riding weight restrictions
B DIMENSIONS OF LADEN VEHICLES
Restrictions on use of vehicles carrying wide or long loads or having fixed appliances or apparatus
- 83Number of trailers
- 84Trailers drawn by motor cycles
- 85Trailers drawn by agricultural motor vehicles
- 86Distance between motor vehicles and trailers
- 86aUse of secondary coupling on trailers
- 86bUse of mechanical coupling devices
- 87Unbraked trailers
- 88Use of bridging plates between motor vehicle and trailer
- 89Leaving trailers at rest
- 90Passengers in trailers
- 91Attendants on trailers and certain other vehicles
- 92Attachment of sidecars
- 93Use of sidecars
CA USE OF MOTOR VEHICLES FOR THE CARRIAGE OR HAULAGE OF DANGEROUS GOODS
D USE OF GAS PROPULSION SYSTEMS AND GAS-FIRED APPLIANCES
DA USE OF AERODYNAMIC DEVICES AND EQUIPMENT, AND ELONGATED CABS
- 100Maintenance and use of vehicle so as not to be a danger, etc
- 100a
- 101Parking in darkness
- 102Passengers on motor cycles
- 103Obstruction
- 104Driver's control
- 105Opening of doors
- 106Reversing
- 107Leaving motor vehicles unattended
- 108Securing of suspended implements
- 109Television sets
- 110Mobile telephones
- 111Review
II MODIFICATION OF THE REGULATIONS
- 3Part exemption from regulation 32 (glazing)
- 4Exemption from regulation 33 (mirrors)
- 5Exemption from regulation 35 (speedometers)
- 6Exemption from regulation 39(2)(c)(i) (fuel tanks to be made of metal)
- 7Exemption from regulation 46 (seat belt anchorages)
- 8Part exemption from regulation 47 (seat belts)
- 9Modifications to regulation 61 (emissions)
- 9a
- 9bModifications to regulation 61A (emissions)
- 9cModification to regulation 61B (retrofitting and refilling of certain air conditioning systems)
- 10Modification to regulation 67 (vehicle identification numbers)
- 1Definitions
- 2Fuelling receptacle
- 3Overpressure protection for the low pressure system
- 4Discharge from thermally-activated pressure relief devices
- 5Discharge from other pressure relief devices
- 6Protection against flammable conditions
- 7Signal warning to driver
- 8Fuel system leakage
- 9Additional installation requirements
I MODIFICATION OF REGULATIONS 55A, 61 AND 61A IN RELATION TO END OF SERIES VEHICLES
II MEANING OF “TYPE APPROVAL END OF SERIES VEHICLE” IN PART I
- 2Meaning of “type approval end of series vehicle” for the purposes of paragraph 1
- 3Meaning of “relevant vehicle” for the purposes of this Part
- 4Meaning of “specified number” for the purposes of this Part
- 5Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for t
- 6Meaning of “relevant period” for the purposes of this Part
III MEANING OF “NON-TYPE APPROVAL END OF SERIES VEHICLE” IN PART I
- 7Meaning of “non-type approval end of series vehicle” in paragraph 1
- 8Meaning of “relevant vehicle” for the purposes of this Part
- 9Meaning of “specified number” for the purposes of this Part
- 10Circumstances in which a vehicle is to be regarded as having been in the territory of a relevant state for
- 11Meaning of “relevant period” for the purposes of this Part
IV MEANING OF “LATE ENTRY INTO SERVICE VEHICLE” IN PART I
Source: legislation.gov.uk (The National Archives), UK legislation with its point-in-time versions. Official publication. Reuse: Open Government Licence v3.0.