SCHEDULE 20
SCHEDULE 20 EMISSIONS ACTIVITIES
Regulation 6(1)
PART 1
Interpretation
Scope
This schedule applies to schedule 20 emissions activities.
Interpretation: polluting substances
(1) For the purposes of this schedule, the substances in sub-paragraphs (2) and (3) are “polluting substances”.
Polluting substances in air—
sulphur dioxide and other sulphur compounds,
oxides of nitrogen and other nitrogen compounds,
carbon monoxide,
volatile organic compounds,
metals and their compounds,
dust including fine particulate matter,
asbestos (suspended particulates and fibres),
chlorine and its compounds,
fluorine and its compounds,
arsenic and its compounds,
cyanides,
substances and mixtures which have been proven to possess carcinogenic or mutagenic properties or properties which may affect reproduction via the air,
polychlorinated dibenzodioxins and polychlorinated dibenzofurans.
Polluting substances in water—
organo-halogen compounds and substances which may form such compounds in the aquatic environment,
organo-phosphorous compounds,
organotin compounds,
substances and preparations, or the breakdown products of such, which have been proved to possess carcinogenic or mutagenic properties or properties which may affect steroidogenic, thyroid, reproduction or other endocrine-related functions in or via the aquatic environment,
persistent hydrocarbons and persistent and bio-accumulable organic toxic substances,
cyanides,
metals and their compounds,
arsenic and its compounds,
biocides and plant protection products,
materials in suspension,
substances which contribute to eutrophication (in particular, nitrates and phosphates),
substances which have an unfavourable influence on the oxygen balance (and can be measured using parameters such as biochemical oxygen demand (BOD) and chemical oxygen demand (COD) etc.),
substances listed in Annex X to Directive 2000/60/EC of the European Parliament and of the Council of 23 October 2000 establishing a framework for Community action in the field of water policy.
PART 2
Amendments to common framework provisions
General principles: waste hierarchy
(1) SEPA must take the waste hierarchy aim into account when carrying out a relevant function contained in sub-paragraph (5) to the extent that the function relates to a schedule 20 emissions activity.
The waste hierarchy aim is that all appropriate measures are taken to apply the following waste hierarchy in the manner set out in sub-paragraphs (3) and (4)—
waste prevention,
preparing for re-use,
recycling,
other recovery, including energy recovery,
disposal.
The waste hierarchy is to be applied in a way which—
delivers the best overall environmental outcome,
takes account of—
the environmental principles of precaution and sustainability,
technical feasibility,
economic viability,
the protection of resources, including reducing overall impacts of resource use and improving efficiency of such use,
the overall environmental, human health and social impacts.
The waste hierarchy may be departed from for particular types of waste where justified in order to ensure the best overall environmental outcome is delivered, and by reference to—
the measures available to the authorised person in the circumstances,
the overall impact of the generation and management of such types of waste.
The relevant functions are—
specification of permit conditions under regulation 22(1)(c), (3) and (4),
determination and revision of standard conditions under regulation 33.
General principles: BAT
SEPA must where applicable set permit conditions in accordance with the following principles relevant to BAT—
best available techniques are applied as appropriate,
the relevant BAT applicable to an activity is as determined by SEPA,
BAT conclusions are the reference point for setting permit conditions,
stricter permit conditions than those achievable by the use of best available techniques as described in relevant BAT conclusions may be set,
emission limit values and equivalent parameters and technical measures as required by paragraph 10 of this schedule must be based on best available techniques, without prescribing the use of any technique or specific technology,
where permit conditions are set on the basis of a best available technique not described in any of the relevant BAT conclusions, the technique must be—
determined by giving special consideration to the criteria listed in paragraph 5 of this schedule, and
in compliance with paragraphs 10 and 11 of this schedule,
where an activity or type of production process carried out at an installation is not covered by any of the BAT conclusions, or where those BAT conclusions do not address all of the potential environmental effects of the activity or process, SEPA must—
engage with the authorised person,
set, after the engagement in head (i), the permit conditions, including emission limit values under paragraph 11 of this schedule, on the basis of the best available techniques that SEPA has determined for those activities or processes by giving special consideration to the criteria listed in paragraph 5 of this schedule,
where monitoring is required by paragraph 10 of this schedule, monitoring requirements are to be, where applicable, based on the conclusions on monitoring as described in the BAT conclusions,
where achieving an environmental quality standard requires stricter conditions than those achievable by the use of best available techniques, SEPA—
must include additional measures in the permit,
may take into account other measures which may be taken in to relation to achieving an environmental quality standard.
BAT: criteria for determining
The following criteria are to be considered by SEPA in determining best available techniques—
the use of low-waste technology,
the use of less hazardous substances,
the furthering of recovery and recycling of substances generated and used in the process and of waste, where appropriate,
comparable processes, facilities or methods of operation which have been tried with success on an industrial scale,
technological advances and changes in scientific knowledge and understanding,
the nature, effects and volume of the emissions concerned,
the commissioning dates for new or existing installations,
the length of time needed to introduce the best available technique,
the consumption and nature of raw materials (including water) used in the process and energy efficiency,
the need to prevent or reduce to a minimum the overall impact of the emissions on the environment and the risks to it,
the need to prevent accidents and to minimise the consequences for the environment,
information published by public international organisations.
Duties relating to standard conditions
(1) When determining or revising standard conditions in relation to schedule 20 emissions activities, SEPA must ensure—
an integrated approach and a high level of environmental protection equivalent to that achievable with individual permit conditions,
that the conditions are based on the best available techniques for preventing, or where that is not practicable reducing, emissions from an activity, without prescribing the use of any specific technique or specific technology.
SEPA must—
ensure standard conditions in relation to schedule 20 activities are periodically reviewed, and
revise any such standard conditions whenever it considers it necessary to do so in order to—
follow developments in best available techniques,
ensure compliance with assimilated and domestic law implementing the Industrial Emissions Directive.
Authorisations: general
A schedule 20 emissions activity may only be authorised by permit.
Permits: applications
(1) An application for a schedule 20 emissions activity, other than an organic solvents emission activity, must include—
a description of the installation and its activities,
a description of the raw and auxiliary materials, other substances, and energy to be used in or generated by the installation,
the sources of emissions from the installation,
the nature and quantities of foreseeable emissions from the installation into each environmental medium and identification of significant effects of the emissions on the environment and human health,
a site report,
a baseline report where the activity involves the use, the production or release of relevant hazardous substances,
a description of the proposed technology and other techniques for preventing or, where this is not possible, reducing emissions from the installation,
a description of measures for the prevention, preparation for re-use, recycling and recovery of waste generated by the installation,
a description of further measures planned to comply with the general aims in regulation 9 of these Regulations as read with paragraph 4 of this schedule,
a description of the measures proposed to monitor emissions,
a description of the main alternatives to the proposed technology, techniques and measures considered by the applicant,
a non-technical summary of this information.
Where an application is for a schedule 20 emissions activity which is an organic solvents activity—
the application must include the items in sub-paragraph (1) with the exception of the items in heads (b) and (h), and
the reference to emissions into each environmental medium in sub-paragraph (1)(d) is to be read as a reference to emissions into the air.
SEPA may on request by the applicant waive the requirement in sub-paragraph (1)(f) to provide a baseline report, having regard for that purpose to the possibility of soil and groundwater contamination.
Where information produced in response to any of the following legislation fulfils any of the requirements of sub-paragraph (1), it may be included in, or attached to the application—
The Control of Major Accident Hazards Regulations 2015,
The Town and Country Planning (Environmental Impact Assessment) (Scotland) Regulations 2017, or
any other relevant legislation.
Where an applicant includes the information referred to in sub-paragraph (4) in, or attached to an application, the applicant must specify which of the requirements of sub-paragraph (1) is addressed by that information and where the information can be located.
Permits: general conditions
(1) A permit for a schedule 20 emissions activity must include—
such conditions as SEPA considers appropriate to ensure protection of the soil and groundwater including—
appropriate requirements for the regular maintenance and surveillance of measures taken to prevent emissions to soil and groundwater,
appropriate requirements for periodic monitoring of soil and groundwater in relation to relevant hazardous substances likely to be found on site and having regard to the possibility of soil and groundwater contamination at the site of the installation,
for the purposes of head (ii), periodic monitoring of—
groundwater must be carried out at least once every 5 years,
soil must be carried out at least once every 10 years,
unless SEPA determines that a different frequency of periodic monitoring is appropriate on the basis of a systematic appraisal of the risk of contamination of soil and groundwater,
conditions to ensure appropriate monitoring and management of waste generated by the installation,
conditions to ensure suitable emission monitoring requirements specifying measurement methodology, frequency and evaluation procedure,
conditions relating to conditions other than normal operating conditions such as start-up and shut-down operations, leaks, malfunctions, momentary stoppages and definitive cessation of operations,
conditions aimed at minimising long-distance or transboundary pollution,
conditions for assessing compliance with the emission limit values or a reference to the applicable requirements specified elsewhere,
conditions requiring the authorised person to supply SEPA regularly, and at least annually, with—
the results of emission monitoring,
other necessary information,
where paragraph 11(6) of this schedule applies, a summary of the results of emission monitoring which allows a comparison with the emission levels associated with the best available techniques,
enabling SEPA to verify compliance with permit conditions,
The requirements of this paragraph and paragraph 10 of this schedule apply to the activities listed in paragraph 46(10) without prejudice to animal welfare legislation.
Permits: emission limit values and environmental quality standards
(1) A permit for a schedule 20 emissions activity must, unless sub-paragraph (2) applies, include emission limit values for—
polluting substances listed in paragraph 2,
other polluting substances,
likely to be emitted in significant quantities from an installation, having regard to the nature of the pollutant, and the potential for emissions to transfer pollution from one environmental medium to another.
SEPA may supplement or replace an emission limit value by an equivalent parameter or technical measure ensuring an equivalent level of protection for the environment.
An emission limit value set pursuant to sub-paragraph (1) must apply at the point at which the emissions leave the installation with any dilution before that point being disregarded for the purpose of determining the emission limit value.
Where relevant BAT conclusions contain an emission level associated with the best available techniques, an emission limit value must ensure that, under normal operating conditions, emissions do not exceed the emission levels associated with the best available techniques laid down in those BAT conclusions.
In order to meet the requirements of sub-paragraph (4), emission limit values may—
be set at emission levels that do not exceed the emission levels associated with the best available techniques and be expressed for the same or a shorter period of time, and under the same reference conditions, as for the emission levels associated with the best available techniques, or
be set at different emission levels than those in sub-paragraph (a) in terms of values, periods of time or reference conditions.
Where an emission limit value is set at a different emission level, in terms of values, periods of time, and reference conditions in accordance with sub-paragraph (5)(b), SEPA must—
assess the results of emissions monitoring at least annually in order to ensure that emissions under normal operating conditions have not exceeded the emission levels associated with the best available techniques during that period, and
ensure that the results of emissions monitoring are available for the same period of time and reference conditions as for the emission levels associated with the best available techniques.
SEPA may grant a derogation to the emission limit values required by sub-paragraph (4) on application by the authorised person requesting a variation, where—
an assessment shows that achievement of the emission levels associated with the best available techniques as described in any applicable BAT conclusions relevant to the activity as determined by SEPA, would lead to disproportionately higher costs compared to environmental benefits due to—
the geographical location or local environmental conditions of the installation, or
the technical characteristics of the installation,
the emission limit value set—
does not exceed the emission limit values set out in schedules 21 to 24 for a particular industrial emissions activity,
ensures that no significant pollution is caused and that a high level of protection of the environment as a whole is achieved, and
a schedule to the permit specifies the reasons for setting a less strict emission limit value, including the result of the assessment under head (a) and the justification for the conditions imposed.
SEPA may take into account the effect of a wastewater treatment plant when determining the emission limit values applying in relation to indirect releases of polluting substances into water from an installation provided that—
doing so does not lead to higher levels of pollution in the environment, and
an equivalent level of protection of the environment as a whole is achieved.
Where relevant BAT conclusions describe best available techniques, but do not contain an emission level associated with the techniques, an emission limit value must—
be determined by giving special consideration to the principles specified in paragraph 4, and
ensure a level of environmental protection equivalent to the techniques described in the BAT conclusions.
Where permit conditions are based on best available techniques not described in any relevant BAT conclusions and which do not contain an emission level associated with those techniques, an emission limit value must—
be determined by giving special consideration to the principles specified in paragraph 4 of this schedule,
ensure a level of environmental protection equivalent to the best available techniques described in the BAT conclusions.
In this paragraph—
“equivalent level of protection” means achieving the equivalent percent reduction in concentration of each relevant pollutant when using the downstream wastewater treatment plant, whilst ignoring any dilution from other wastewater streams, that would be achieved through applying the emission limits associated with best available techniques at the point of discharge from the installation,
“less strict emission limit value” means a value that is higher than the value that would otherwise be set if based on best available techniques.
Exception for the testing and use of emerging techniques
SEPA may, on determining an application for a variation by an authorised person, or as part of an application for a permit, set less strict conditions than those that would otherwise be required by paragraphs 4(e) and 10(4) of this schedule for the purpose of the testing and use of an emerging technique provided that—
the less strict conditions apply for a period of time not to exceed 9 months, and
after that period of time—
use of the technique stops, or
the activity achieves at least the emission levels associated with the best available techniques.
Permits: surrender applications
(1) In considering the impact on the environment resulting from the carrying on, and cessation of a schedule 20 emissions activity in accordance with paragraph 14(1) of schedule 1, SEPA must consider—
the condition of the soil and groundwater affected by the activity, including at the site of the installation, and
any changes from the condition of the site as described in the site report, and where applicable, the baseline report.
SEPA must not grant an application for surrender for a schedule 20 emissions activity unless—
the authorised person has taken the necessary measures to address any significant pollution of soil or groundwater by relevant hazardous substances compared to the state established in the baseline report, taking account of the technical feasibility of such measures, and
where the contamination of soil and groundwater at the site poses a significant risk to human health or the environment as a result of the regulated activity, the authorised person has taken the necessary actions to remove, control, contain or reduce any hazardous substances so that the site ceases to pose such a risk, taking account of its current or approved future use.
Permits: reviews
(1) SEPA must periodically review the conditions of permits for schedule 20 emissions activities, and where necessary, update permit conditions to ensure compliance with this schedule.
SEPA must, in reviewing permit conditions—
consider any information resulting from monitoring or inspections,
where that review takes place by virtue of sub-paragraph (4)(a)—
take into account the BAT conclusions prompting the review,
take into account any BAT conclusions for other activities within the installation published since the permit was granted or last reviewed,
reconsider any derogations to emission limit values associated with BAT conclusions.
Where a review takes place by virtue of any of sub-paragraph (4)(b) to (f), SEPA may take into account any relevant BAT conclusions and reconsider any derogations to emission limit values associated with those BAT conclusions.
In this paragraph, “periodically” means—
within 4 years of the publication of decision on BAT conclusions relating to the main activity of the installation,
when necessary to comply with a new or revised environmental quality standard,
when pollution caused by an installation is of such significance that the emission limit values in the permit need to be reviewed or new emission limit values need to be included,
when the operational safety of the activities carried out in the installation requires that other techniques be used,
when there are developments in the best available techniques that allow for significant reduction of emissions in a case where the regulated activities are not covered by any of the BAT conclusions, or
when considered appropriate by SEPA.
Environmental inspection plans
(1) SEPA must maintain an environmental inspection plan in respect of schedule 20 emissions activities.
An environmental inspection plan must—
include a general assessment of relevant significant environmental issues,
include a list of the installations covered by the plan,
provide for a procedure for drawing up programmes for routine environmental inspections under paragraph 15(1)(b) of this schedule,
provide a procedure for non-routine environmental inspections under paragraph 15(3) and (5) of this schedule,
An environmental inspection plan may be comprised of one or more plans, documents or strategies, and may be prepared at a national, regional or local level.
SEPA must regularly review, and where appropriate update or replace, an environmental inspection plan.
Environmental inspections
(1) SEPA must—
conduct environmental inspections of schedule 20 emissions activities,
regularly draw up programmes for environmental inspections based on the environmental inspection plan, including the frequency of site visits for different types of installations.
The period between site visits for the purpose of an environmental inspection carried out under the environmental inspection plan, and not falling under sub-paragraphs (3) or (5) must be based on a systematic appraisal of risk and must not exceed—
one year for installations posing the highest risk,
three years for installations posing the lowest risk.