PARAMETERS AND CIRCUMSTANCES FOR CHECK MONITORING
(1)Item | (2)Parameter | (3)Circumstances
1. | Aluminium | When used as flocculant or where the water originates from, or is influenced by, surface waters.
2. | Ammonium |
3. | Clostridium perfringens (including spores) | Where the water originates from, or is influenced by, surface waters.
4. | Coliform bacteria |
5. | Colony count |
6. | Colour |
7. | Conductivity |
8. | Escherichia coli |
9. | Hydrogen ion |
10. | Iron | When used as flocculant or where the water originates from, or is influenced by, surface waters.
11. | Manganese | Where the water originates from, or is influenced by, surface waters.
12. | Nitrate | When chloramination is practised.
13. | Nitrite | When chloramination is practised.
14. | Odour |
15. | Taste |
16. | Turbidity… | |
… | … | …
… | … |
… | … | …
… | … |
… | … |
… | … |
… | … |
… | … |
… | … |
… | … | …
… | … | …
… | … | …
… | … | …
… | … |
… | … |
… | … |
ANNUAL SAMPLING FREQUENCIES: SAMPLING POINTS
1 Sampling at the frequencies specified in this table for check monitoring is required only when the circumstances for this parameter in column (3) of Table 1 apply (see regulation 6(4)(b)). Where this is not the case, sampling at the frequencies specified in this table for audit monitoring is required instead.
2 Subject to note (e), samples for this parameter may, to the extent authorised under regulation 8 for a water supply zone, be taken from alternative supply points in accordance with regulation 9(1)(b).
3 Only those pesticides which are likely to be present in a given supply need to be monitored.
4 Where the population is not an exact multiple of 5,000, the population figure should be rounded up to the nearest multiple of 5,000.
5 If sodium hypochlorite is added after water has left a treatment works in the water supply zone, monitoring for this parameter must be carried out at sampling points (rather than at supply points).
(1)Item | (2)Parameter | (3)Estimated population ofwater supply zone | (4)Reduced | (5)Standard
Subject to check monitoring
1. | Coliform bacteria | < 100 | – | 4
2. | Escherichia coli | ≥100 | – | 12 per 5,000
3. | Residual disinfectant | | | population4
4. | Aluminium1 | < 100 | 1 | 2
5. | Ammonium | 100-4,999 | 2 | 4
6. | Clostridium perfringens (including spores)12 | 5,000-9,999 | 6 | 12
10,000-29,999 | 12 | 24
7. | Colony count | 30,000-49,999 | 18 | 36
8. | Colour | 50,000-79,999 | 26 | 52
9. | Conductivity2 | 80,000-100,000 | 38 | 76
10. | Hydrogen ion …
…
…
…
…
…
… | … | … | … | …
… | … | … | … | …
… | … | | | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | | |
… | … | | |
11. | Iron1… | … | | |
12. | Manganese1… | … | | |
13. | Nitrate1… | … | | |
14. | Nitrite1… | … | | |
15. | Odour… | … | | |
16. | Taste… | … | | |
17. | Turbidity | | |
Subject to audit monitoring
18. | Antimony | < 100 | – | 1
19. | Arsenic | 100-4,999 | – | 4
20. | Benzene2 | 5,000-100,000 | – | 8
21. | Benzo(a)pyrene… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | | |
… | … | | |
22. | Boron2… | … | | |
23. | Bromate25… | … | | |
24. | Cadmium… | … | | |
25. | Chloride2… | … | | |
26. | Chromium… | … | | |
27. | Copper… | … | | |
28. | Cyanide2… | … | | |
29. | 1,2-dichloroethane2… | … | | |
30. | Enterococci… | … | | |
31. | Fluoride2… | … | | |
32. | Lead… | … | | |
33. | Mercury2… | … | | |
34. | Nickel… | … | | |
35. | Pesticide23… | … | | |
36. | PAH: Total … | … | | |
37. | Selenium… | … | | |
38. | Sodium… | … | | |
39. | Sulphate2… | … | | |
40. |
Tetrachloroethene and
Trichloroethene2
41. | Tetrachloromethane2 | | |
42. | THM: Total … | … | | |
… | … | | |
43. | Total organic carbon2 … | … | | |
44. | Indicative dose2 … | … | | |
44A. | Radon2… | … | | |
45. | Tritium2… | … | | |
Notes—…
ANNUAL SAMPLING FREQUENCIES: SUPPLY POINTS
1 Sampling at the frequencies specified in this table for check monitoring is required only where the water originates from, or is influenced by, surface waters (see Table 1). Where this is not the case, sampling at the frequencies specified in this table for audit monitoring is required instead.
2 If sodium hypochlorite is added after water has left a treatment works in the water supply zone, audit monitoring for this parameter must be carried out at sampling points (rather than at supply points).
3 Only those pesticides which are likely to be present in a given supply need to be monitored.
(1)Item | (2)Parameter | (3)Volume of watersupplied m3/d | (4)Reduced | (5)Standard
Subject to check monitoring
1. | Clostridium perfringens (including spores)1 | < 20 | – | 2
20-999 | 2 | 4
2. | Conductivity | 1,000-1,999 | 6 | 12
2,000-5,999 | 12 | 24
6,000-9,999 | 18 | 36
10,000-15,999 | 26 | 52
16,000-32,999 | 52 | 104
33,000-49,999 | 78 | 156
50,000-67,999 | 104 | 208
68,000-84,999 | 130 | 260
85,000-101,999 | 156 | 312
102,000-119,999 | 183 | 365
120,000-241,999 | 365 | 730
242,000-484,999 | 730 | 1,460
485,000-728,999 | 1,095 | 2,190
Subject to audit monitoring
3. | Benzene | < 20 | – | 1
4. | Boron | 20-999 | – | 4
5. | Bromate2 | 1,000-49,999 | – | 8
6. | Chloride | 50,00-89,999 | – | 12
7. | Cyanide | 90,000-299,999 | – | 24
8. | 1,2-dichloroethane | 300,000-649,999 | – | 36
9. | Fluoride | ≥ 650,000 | – | 48
10. | Mercury…
…
…
…
… | … | … | … | …
… | … | …
… | … | … | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | … | … | …
… | … | | |
… | … | | |
11. | Pesticide3… | … | | |
12. | Sulphate… | … | | |
13. |
Tetrachloroethene and
Trichloroethene
14. | Tetrachloromethane | | |
15. | Total organic carbon … | … | | |
… | … | | |
16. | Indicative dose … | … | | |
16A. | Radon… | … | | |
17. | Tritium… | … | | |
Notes—…
1 Sampling at the frequencies specified in this table for check monitoringitem 5 is required only when chloramination is practised. When this is not the case, this parameter must be sampled instead at the frequencies specified in this table for audit monitoringitem 7 .
Subject to check monitoring…
Subject to audit monitoring…