This standard does not apply to–
(a) alterations and extensions to buildings other than—
(i) alterations and extensions to stand-alone buildings having an area less than 50 square metres that would increase the area to 50 square metres or more;
(ii) extensions to non-domestic buildings where the extension will have an area which is both greater than 100 square metres and greater than 25%In this standard—
“energy from renewable sources” means energy from renewable non-fossil sources, namely wind, solar, aero-thermal, geothermal, hydrothermal and ocean energy, hydropower, biomass, landfill gas, sewage treatment plant gas and biogases; and
“nearly zero-energy building” means a building that has a very high energy performance, as determined in accordance with a methodology approved under regulation 7 of the area of the existing building; and
(iii) alterations to buildings involving the fit-out of the building shell which is the subject of a continuing requirement;
(b) conversions of buildings;
(c) non-domestic buildings and buildings that are ancillary Energy Performance of Buildings (Scotland) Regulations 2008 , where the nearly zero or very low amount of energy required should be covered to a dwelling that are stand-alone having an area less than 50 square metres;
(d) buildings, which will not be heated or cooled other than by heating provided solely for the purpose of frost protection; or
(e) limited life buildings which have an intended life of less than 2 yearsvery significant extent by energy from renewable sources, including energy from renewable sources produced on site or nearby.