, The Natural Mineral Water, Spring Water and Bottled Drinking Water Regulations (Northern…

In forcesince 28 Nov 2015

Table 1

Prescribed methods of analysis

1 Use the following method to make m-CP agar:

Parameter | Method

Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agar1 at 44 ±1ºC for 21± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.

Coliform bacteria | BS-EN ISO 9308-1

Colony count 22ºC – enumeration of culturable microorganisms | BS-EN ISO 6222

Colony count 37ºC – enumeration of culturable microorganisms | BS-EN ISO 6222

Enterococci | BS-EN ISO 7899-2

Escherichia coli (E. Coli) | BS-EN ISO 9308-1

Pseudomonas aeruginosa | BS-EN ISO 12780

Changed on 28 Nov 2015

1 Use the following method to make m-CP agar:

(1) Use the following method to make m-CP agar: Clostridium perfringens (including spores) | Membrane filtration followed by anaerobic incubation of the membrane on m-CP agaragar1 at 44 ±1ºC for 21± 3 hours. Count opaque yellow colonies that turn pink or red after exposure to ammonium hydroxide vapours for 20 to 30 seconds.

Make a basal medium consisting of— Tryptose | 30.0g Yeast extract | 20.0g Sucrose | 5.0g L-cysteine hydrochloride | 1.0g MgSO4.7H2O | 0.1g Bromocresol purple | 40.0mg Agar | 15.0g Water | 1,000.0ml Dissolve the ingredients of basal medium, adjust pH to 7.6 and autoclave at 121ºC for 15 minutes. Allow the medium to cool. Dissolve— D-cycloserine | 400.0mg Polymyxine-B sulphate | 25.0mg Indoxl-β-D-glucoside | 60.0mg into 8ml sterile water and add it to the medium. Add to the medium— Filter-sterilised 0.5% phenolphthalein diphosphate solution | 20.0ml Filter-sterilised 4.5% FeCl3.6H2O | 2.0ml Table 2 Prescribed performance characteristics for methods of analysis Parameters | Trueness % of prescribed concentration or value specification | Precision % of prescribed concentration or value or specification | Limit of detection % of prescribed concentration or value or specification (1) The method of analysis should determine total cyanide in all forms. (2) Oxidation should be carried out for 10 minutes at 100ºC under acid conditions using permanganate. (3) The performance characteristics apply to each individual pesticide and will depend on the pesticide concerned. (4) The performance characteristics apply to the individual substances specified at 25% of the parametric value in Table B in Part 2, Schedule 7. (5) The performance characteristics apply to the individual substance specified at 50% of the parametric value in Table B in Part 2, Schedule 7. Aluminium | 10 | 10 | 10 Ammonium | 10 | 10 | 10 Antimony | 25 | 25 | 25 Arsenic | 10 | 10 | 10 Benzene | 25 | 25 | 25 Benzo(a)pyrene | 25 | 25 | 25 Boron | 10 | 10 | 10 Bromate | 25 | 25 | 25 Cadmium | 10 | 10 | 10 Chloride | 10 | 10 | 10 Chromium | 10 | 10 | 10 Conductivity | 10 | 10 | 10 Copper | 10 | 10 | 10 Cyanide | 10 | 10 | 10 1,2-dichloroethane | 25 | 25 | 10 Fluoride | 10 | 10 | 10 Iron | 10 | 10 | 10 Lead | 10 | 10 | 10 Manganese | 10 | 10 | 10 Mercury | 20 | 10 | 20 Nickel | 10 | 10 | 10 Nitrate | 10 | 10 | 10 Nititre | 10 | 10 | 10 Oxidisability | 25 | 25 | 10 Pesticides and related products | 25 | 25 | 25 Polycyclic aromatic hydrocarbons | 25 | 25 | 25 Selenium | 10 | 10 | 10 Sodium | 10 | 10 | 10 Sulphate | 10 | 10 | 10 Tetrachloroethene | 25 | 25 | 10 Tetrachloromethane | 20 | 20 | 20 Trichloroethene | 25 | 25 | 10 Trihalomethanes | 25 | 25 | 10

  1. 28 Nov 2015 – todayin force
  2. 5 Nov 2015 – 28 Nov 2015earlier wording