TABLE OF CONTENTS
ANNEX I
LIST OF TYPES OF UK FERTILISERS
A.
Inorganic straight primary nutrient fertilisers
A.1.
Nitrogenous fertilisers
No | Type designation | Data on method of production and essential ingredients | Minimum content of nutrients (percentage by weight)Data on the expression of nutrientsOther requirements | Other data on the type designation | Nutrient content to be declaredForms and solubilities of the nutrientsOther criteria
1 | 2 | 3 | 4 | 5 | 6
1(a) | Calcium nitrate (nitrate of lime) | Chemically obtained product containing calcium nitrate as its essential ingredient and possibly ammonium nitrate |
15 % N
Nitrogen expressed as total nitrogen or as nitric and ammoniacal nitrogen. Maximum content of ammoniacal nitrogen: 1,5 % N
Total nitrogen
Additional optional particulars:
Nitric nitrogen
Ammoniacal nitrogen
1(b) | Calcium magnesium nitrate (nitrate of lime and magnesium) | Chemically obtained product containing calcium nitrate and magnesium nitrate as essential ingredients |
13 % N
Nitrogen expressed as nitric nitrogen. Minimum content of magnesium in the form of water-soluble salts expressed as magnesium oxide: 5 % MgO
Nitric nitrogen
Water-soluble magnesium oxide
1(c) | Magnesium nitrate | Chemically obtained product containing as its essential ingredient hexahydrated magnesium nitrate |
10 % N
Nitrogen expressed as nitric nitrogen
When marketed in the form of crystals as note ‘in crystallised form’ may be added |
Nitric nitrogen
Water-soluble magnesium oxide
14 % MgO
Magnesium expressed as water-soluble magnesium oxide
2(a) | Sodium nitrate (nitrate of soda) | Chemically obtained product containing sodium nitrate as its essential ingredient |
15 % N
Nitrogen expressed as nitric nitrogen
Nitric nitrogen
2(b) | Chile nitrate | Product prepared from caliche, containing sodium nitrate as its essential ingredient |
15 % N
Nitrogen expressed as nitric nitrogen
Nitric nitrogen
3(a) | Calcium cyanamide | Chemically obtained product containing calcium cyanamide as its essential ingredient, calcium oxide and possibly small quantities of ammonium salts and urea |
18 % N
Nitrogen expressed as total nitrogen, at least 75 % of the nitrogen declared being bound in the form of cyanamide
Total nitrogen
3(b) | Nitrogenous calcium cyanamide | Chemically obtained product containing calcium cyanamide as its essential ingredient, and calcium oxide and possibly small quantities of ammonium salts and urea, plus added nitrate |
18 % N
Nitrogen expressed as total nitrogen, at least 75 % of the non-nitric nitrogen declared being bound in the form of cyanamide. Nitric nitrogen content:
minimum: 1 % N
maximum: 3 % N
Total nitrogen
Nitric nitrogen
4 | Sulphate of ammonia | Chemically obtained product containing ammonium sulphate as its essential ingredient, possibly with up to 15 % calcium nitrate (nitrate of lime). |
19,7 % N
Nitrogen expressed as total nitrogen.
Maximum content of nitric nitrogen 2,2 % N if calcium nitrate (nitrate of lime) is added.
When marketed in the form of a combination of ammonium sulphate and calcium nitrate (nitrate of lime), the designation must include ‘ with up to 15 % calcium nitrate (nitrate of lime) ’ . |
Ammoniacal nitrogen.
Total nitrogen if calcium nitrate (nitrate of lime) is added
5 | Ammonium nitrate or calcium ammonium nitrate | Chemically obtained product containing ammonium nitrate as its essential ingredient, which may contain fillers such as ground limestone, calcium sulphate, ground dolomite, magnesium sulphate, kieserite |
20 % N
Nitrogen expressed as nitric nitrogen and ammoniacal nitrogen, each of these two forms of nitrogen accounting for about half the nitrogen present.
See Annexes III.1 and III.2 of this regulation, if required.
The designation ‘calcium ammonium nitrate’ is exclusively reserved for a fertiliser containing only calcium carbonate (for instance limestone) and/or magnesium carbonate and calcium carbonate (for instance dolomite) in addition to ammonium nitrate. The minimum content of these carbonates must be 20 % and their purity level at least 90 % |
Total nitrogen
Nitric nitrogen
Ammoniacal nitrogen
6 | Ammonium sulphate-nitrate | Chemically obtained product containing as essential ingredients ammonium nitrate and ammonium sulphate |
25 % N
Nitrogen expressed as ammoniacal and nitric nitrogen. Minimum nitric nitrogen content: 5 %
Total nitrogen
Ammoniacal nitrogen
Nitric nitrogen
7 | Magnesium sulphonitrate | Chemically obtained product containing ammonium nitrate, ammonium sulphate and magnesium sulphate as essential ingredients |
19 % N
Nitrogen expressed as ammoniacal and nitric nitrogen. Minimum nitric nitrogen content: 6 % N
Total nitrogen
Ammoniacal nitrogen
5 % MgO
Magnesium in the form of water-soluble salts expressed as magnesium oxide
Nitric nitrogen
Water-soluble magnesium oxide
8 | Magnesium ammonium nitrate | Chemically obtained product containing ammonium nitrates and magnesium compound salts (dolomite magnesium carbonate and/or magnesium sulphate) as essential ingredients |
19 % N
Nitrogen expressed as ammoniacal nitrogen and nitric nitrogen. Minimum nitric nitrogen content 6 % N
Total nitrogen
Ammoniacal nitrogen
Nitric nitrogen
5 % MgO
Magnesium expressed as total magnesium oxide
Total magnesium oxide and possibly, water-soluble magnesium oxide
9 | Urea | Chemically obtained product containing carbonyl diamide (carbamide) as its essential ingredient |
44 % N
Total ureic nitrogen (including biuret). Maximum biuret content: 1,2 %
Total nitrogen, expressed as ureic nitrogen
10 | Crotonylidene diurea |
Product obtained by reaction of urea with crotonaldehyde
Monomeric compound
28 % N
Nitrogen expressed as total nitrogen
At least 25 % N from the crotonylidene diurea
Maximum ureic nitrogen content: 3 %
Total nitrogen
Ureic nitrogen where this is at least 1 % by weight
Nitrogen from crotonylidene diurea
11 | Isobutylidene diurea |
Product obtained by reaction of urea with isobutyraldehyde Monomeric compound
Monomeric compound
28 % N
Nitrogen expressed as total nitrogen
At least 25 % N from isobutylidene diurea
Maximum ureic nitrogen content: 3 %
Total nitrogen
Ureic nitrogen where this is at least 1 % by weight
Nitrogen from isobutylidene diurea
12 | Urea formaldehyde |
Product obtained by reaction of urea with formaldehyde and containing as its essential ingredients molecules of urea formaldehyde
Polymeric compound
36 % N total nitrogen
Nitrogen expressed as total nitrogen
At least 3/5 of the declared total nitrogen content must be soluble in hot water
At least 31 % N from urea formaldehyde
Maximum ureic nitrogen content: 5 %
Total nitrogen
Ureic nitrogen where this is at least 1 % by weight
Nitrogen from formaldehyde urea that is soluble in cold water
Nitrogen from formaldehyde urea that is only soluble in hot water
13 | Nitrogenous fertiliser containing crotonylidene diurea | Product obtained chemically containing crotonylidene diurea and a straight nitrogen fertiliser [List A-1, excluding products 3(a), 3(b) and 5] |
18 % N expressed as total nitrogen
At least 3 % nitrogen in ammoniacal and/or nitric and/or ureic form
At least 1/3 of the declared total nitrogen content must be derived from crotonylidene diurea
Maximum biuret content:
(ureic N + crotonylidene diurea N) × 0,026
Total nitrogen
For each form amounting to at least 1 %:
nitric nitrogen
ammoniacal nitrogen
ureic nitrogen
Nitrogen from crotonylidene diurea
14 | Nitrogenous fertiliser containing isobutylidene diurea | Product obtained chemically containing isobutylidene diurea and a straight nitrogenous fertiliser [List A-1, excluding products 3(a), 3(b) and 5] |
18 % N expressed as total nitrogen
At least 3 % nitrogen in ammoniacal and/or nitric and/or ureic form
A least 1/3 of the declared total nitrogen content must derive from isobutylidene diurea
Maximum biuret content:
(Ureic N + isobutylidene diurea N) × 0,026
Total nitrogen
For each form amounting to at least 1 %:
nitric nitrogen
ammoniacal nitrogen
ureic nitrogen
Nitrogen from isobutylidene diurea
15 | Nitrogenous fertiliser containing urea formaldehyde | Product obtained chemically containing urea formaldehyde and a straight nitrogenous fertiliser [List A-1, excluding products 3(a), 3(b) and 5] |
18 % N expressed as total nitrogen
At least 3 % nitrogen in ammoniacal and/or nitric and/or ureic form
At least 1/3 of the declared total nitrogen content must derive from urea formaldehyde
The nitrogen from the urea formaldehyde must contain at least 3/5 nitrogen that is soluble in hot water
Maximum biuret content:
(Ureic N + urea formaldehyde) × 0,026
Total nitrogen
For each form amounting to at least 1 %:
nitric nitrogen
ammoniacal nitrogen
ureic nitrogen
Nitrogen from urea formaldehyde
Nitrogen from urea formaldehyde that is soluble in cold water
Nitrogen from urea formaldehyde that is only soluble in hot water
16 | Urea-ammonium sulphate | Product obtained chemically from urea and ammonium sulphate |
30 % N
Nitrogen expressed as ammoniacal and ureic nitrogen
Minimum ammoniacal nitrogen content: 4 %
Minimum sulphur content expressed as sulphur trioxide: 12 %
Maximum biuret content: 0,9 %
Total nitrogen
Ammoniacal nitrogen
Ureic nitrogen
Water-soluble sulphur trioxide
A.2.
Phosphatic fertilisers
Where a particle size criterion is prescribed for the basic constituent materials of fertilisers sold in granular form (fertilisers 1, 3, 4, 5, 6 and 7), it will be established by an appropriate analytical method.
No | Type designation | Data on method of production and essential ingredients | Minimum content of nutrients (percentage by weight)Data on the expression of nutrientsOther requirements | Other data on the type designation | Nutrient content to be declaredForms and solubilities of the nutrientsOther criteria
1 | 2 | 3 | 4 | 5 | 6
1 |
Basic slag:
Thomas phosphates
Thomas slag
Product obtained in iron-smelting by treatment of the phosphorus melts and containing calcium silicophosphates as its essential ingredients |
12 % P2O5
Phosphorus expressed as phosphorus pentoxide soluble in mineral acids, at least 75 % of the declared content of phosphorus pentoxide being soluble in 2 % citric acid
or P2O5
Phosphorus expressed as phosphorus pentoxide soluble in 2 % citric acid
Particle size:
at least 75 % able to pass through a sieve with a mesh of 0,160 mm
at least 96 % able to pass through a sieve with a mesh of 0,630 mm
Total phosphorus pentoxide (soluble in mineral acids) 75 % of which (to be indicated as % by weight) is soluble in 2 % citric acid (for marketing in France, Italy, Spain, Portugal, Greece, Czech Republic, Estonia, Cyprus, Latvia, Lithuania, Hungary, Malta, Poland, Slovenia, Slovakia,Bulgaria and Romania)
Total phosphorus pentoxide (soluble in mineral acids) and phosphorus pentoxide soluble in 2 % citric acid (for marketing in the United Kingdom)
Phosphorus pentoxide soluble in 2 % citric acid (for marketing in Germany, Belgium, Denmark, Ireland, Luxembourg, the Netherlands Iceland, Liechtenstein, Norway and Austria)
2(a) | Single superphosphate | Product obtained by reaction of ground mineral phosphate with sulphuric acid and containing monocalcium phosphate as an essential ingredient as well as calcium sulphate |
16 % P2O5
Phosphorus expressed as P2O5 soluble in neutral ammonium citrate, at least 93 % of the declared content of P2O5 being water-soluble
Test sample: 1 g
Phosphorus pentoxide soluble in neutral ammonium citrate
Water-soluble phosphorus pentoxide
2(b) | Concentrated superphosphate | Product obtained by reaction of ground mineral phosphate with sulphuric acid and phosphoric acid and containing monocalcium phosphate as an essential ingredient as well as calcium sulphate |
25 % P2O5
Phosphorus expressed as P2O5 soluble in neutral ammonium citrate, at least 93 % of the declared content of P2O5 being water-soluble
Test sample: 1 g
Phosphorus pentoxide soluble in neutral ammonium citrate
Water-soluble phosphorus pentoxide
2(c) | Triple superphosphate | Product obtained by reaction of ground mineral phosphate with phosphoric acid and containing monocalcium phosphate as its essential ingredient |
38 % P 2 O 5
Phosphorus expressed as P 2 O 5 soluble in neutral ammonium citrate, at least 85 % of the declared content of P 2 O 5 being water-soluble
Test sample: 3 g
Phosphorus pentoxide soluble in neutral ammonium citrate
Water-soluble phosphorus pentoxide
3 | Partially solubilised rock phosphate | Product obtained by partial solubilisation of ground rock phosphate with sulphuric acid or phosphoric acid and containing as essential ingredients monocalcium phosphate, tricalcium phosphate and calcium sulphate |
20 % P2O5
Phosphorus expressed as P2O5 soluble in mineral acids, at least 40 % of the declared content of P2O5 being water-soluble
Particle size:
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
at least 98 % able to pass through a sieve with a mesh of 0,630 mm
Total phosphorus pentoxide (soluble in mineral acids)
Phosphorus pentoxide soluble in water
3(a) | Partially solubilised rock phosphate with magnesium | Product obtained by partial solubilisation of ground rock phosphate with sulphuric acid or phosphoric acid with the addition of magnesium sulphate or magnesium oxide, and containing as essential ingredients monocalcium phosphate, tricalcium phosphate, calcium sulphate and magnesium sulphate |
16 % P 2 O 5
6 % MgO
Phosphorus expressed as P 2 O 5 soluble in mineral acids, at least 40 % of the declared content of P 2 O 5 being water-soluble
Particle size:
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
at least 98 % able to pass through a sieve with a mesh of 0,630 mm
Total phosphorus pentoxide (soluble in mineral acids)
Phosphorus pentoxide soluble in water
Total magnesium oxide
Water-soluble magnesium oxide
4 | Dicalcium phosphate | Product obtained by precipitation of solubilised phosphoric acid from mineral phosphates or bones, and containing dicalcium phosphate dihydrate as its essential ingredient |
38 % P2O5
Phosphorus expressed as P2O5 soluble in alkaline ammonium citrate (Petermann)
Particle size:
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
at least 98 % able to pass through a sieve with a mesh of 0,630 mm
Phosphorus pentoxide soluble in alkaline ammonium citrate
5 | Calcined phosphate | Product obtained by heat treatment of ground rock phosphate with alkaline compounds and silicic acid, and containing alkaline calcium phosphate and calcium silicate as essential ingredients |
25 % P2O5
Phosphorus expressed as P2O5 soluble in alkaline ammonium citrate (Petermann)
Particle size:
at least 75 % able to pass through a sieve with a mesh of 0,160 mm
at least 96 % able to pass through a sieve with a mesh of 0,630 mm
Phosphorus pentoxide soluble in alkaline ammonium citrate
6 | Aluminium-calcium phosphate | Product obtained in amorphous form by heat treatment and grinding, containing aluminium and calcium phosphates as essential ingredients |
30 % P2O5
Phosphorus expressed as P2O5 soluble in mineral acids, at least 75 % of the declared content of P2O5 being soluble in alkaline ammonium citrate (Joulie)
Particle size:
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
at least 98 % able to pass through a sieve with a mesh of 0,630 mm
Total phosphorus pentoxide (soluble in mineral acids)
Phosphorus pentoxide soluble in alkaline ammonium citrate
7 | Soft ground rock phosphate | Product obtained by grinding soft mineral phosphates and containing tricalcium phosphate and calcium carbonate as essential ingredients |
25 % P2O5
Phosphorus expressed as P2O5 soluble in mineral acids, at least 55 % of the declared content of P2O5 being soluble in 2 % formic acid
Particle size:
at least 90 % able to pass through a sieve with a mesh of 0,063 mm
at least 99 % able to pass through a sieve with a mesh of 0,125 mm
Total phosphorus pentoxide (soluble in mineral acids)
Phosphorus pentoxide soluble in 2 % formic acid
Percentage by weight of material able to pass through a sieve with a mesh of 0,063 mm
A.3.
Potassic fertilisers
No | Type designation | Data on method of production and essential ingredients | Minimum content of nutrients (percentage by weight)Data on the expression of nutrientsOther requirements | Other data on the type designation | Nutrient content to be declaredForms and solubilities of the nutrientsOther criteria
1 | 2 | 3 | 4 | 5 | 6
1 | Crude potassium salt | Product obtained from crude potassium salts |
9 % K 2 O
Potassium expressed as water-soluble K 2 O
2 % MgO
Magnesium in the form of water-soluble salts, expressed as magnesium oxide
Usual trade names may be added |
Water-soluble potassium oxide
Water-soluble magnesium oxide
Total sodium oxide
Chloride content must be declared
2 | Enriched crude potassium salt | Product obtained from crude potassium salts enriched by blending with potassium chloride |
18 % K 2 O
Potassium expressed as water-soluble K 2 O
Usual trade names may be added |
Water-soluble potassium oxide
Optional mention of the water-soluble magnesium oxide content where higher than 5 % MgO
3 | Muriate of potash | Product obtained from crude potassium salts and containing potassium chloride as its essential ingredient |
37 % K2O
Potassium expressed as water-soluble K2O
Usual trade names may be added | Water-soluble potassium oxide
4 | Potassium chloride containing magnesium salts | Product obtained from crude potassium salts with added magnesium salts and containing potassium chloride and magnesium salts as essential ingredients |
37 % K2O
Potassium expressed as water-soluble K2O
Water-soluble potassium oxide
Water-soluble magnesium oxide
5 % MgO
Magnesium in the form of water-soluble salts, expressed as magnesium oxide
5 | Sulphate of potash | Product obtained chemically from potassium salts and containing potassium sulphate as its essential ingredient |
47 % K2O
Potassium expressed as water-soluble K2O
Maximum chloride content: 3 % Cl
Water-soluble potassium oxide
Optional mention of the chloride content
6 | Sulphate of potash containing magnesium salt | Product obtained chemically from potassium salts, possibly with addition of magnesium salts, and containing potassium sulphate and magnesium sulphate as essential ingredients |
22 % K2O
Potassium expressed as water-soluble K2O
Usual trade names may be added |
Water-soluble potassium oxide
Water-soluble magnesium oxide
Optional mention of the chloride content
8 % MgO
Magnesium in the form of water-soluble salts, expressed as magnesium oxide
Maximum chloride content: 3 % Cl
7 | Kieserite with potassium sulphate | Product obtained from Kieserite with potassium sulphate added |
8 % MgO
Magnesium expressed as water-soluble MgO
Usual trade names may be added |
Water-soluble magnesium oxide
Water-soluble potassium oxide
Optional mention of the chloride content
6 % K2O
Potassium expressed as water-soluble K2O
Total MgO + K2O: 20 %
Maximum chloride content: 3 % Cl
B.
Inorganic compound primary nutrient fertilisers
B.1.
NPK fertilisers
B.1.1. | Type designation: | NPK fertilisers.
Data on method of production: | Product obtained chemically or by blending, without addition of organic nutrients of animal or vegetable origin.
Minimum content of nutrients (percentage by weight): |
Total: 20 % (N + P2O5 + K2O);
For each of the nutrients: 3 % N, 5 % P2O5, 5 % K2O.
Forms, solubilities and nutrient content to be declared as specified in columns 4, 5 and 6Particle size | Data for identification of the fertilisersOther requirements
N | P2O5 | K2O | N | P2O5 | K2O
1 | 2 | 3 | 4 | 5 | 6
(1)
Total nitrogen
(2)
Nitric nitrogen
(3)
Ammoniacal nitrogen
(4)
Ureic nitrogen
(5)
Cyanamide nitrogen
(1)
Water-soluble P2O5
(2)
P2O5 soluble in neutral ammonium citrate
(3)
P2O5 soluble in neutral ammonium citrate and in water
(4)
P2O5 soluble in mineral acids only
(5)
P2O5 soluble in alkaline ammonium citrate (Petermann)
(6a)
P2O5 soluble in mineral acids, of which at least 75 % of the declared P2O5 content is soluble in 2 % citric acid
(6b)
P2O5 soluble in 2 % citric acid
(7)
P2O5 soluble in mineral acids, of which at least 75 % of the declared P2O5 content is soluble in alkaline ammonium citrate (Joulie)
(8)
P2O5 soluble in mineral acids, of which at least 55 % of the declared P2O5 content is soluble in 2 % formic acid
Water soluble K2O |
(1)
Total nitrogen
(2)
If any of the forms of nitrogen (2) to (5) amounts to at least 1 % by weight, it must be declared
(3)
If above 28 %, see Annex III.2
1.
An NPK fertiliser free from Thomas slag, calcined phosphate, aluminium-calcium phosphate, partially solubilised rock phosphate and soft ground rock phosphate must be declared in accordance with solubilities (1), (2) or (3):
when the water-soluble P2O5 does not amount to 2 %, solubility (2) only shall be declared;
when the water-soluble P2O5 is at least 2 %, solubility (3) shall be declared, and the water-soluble P2O5 content must be indicated [solubility (1)].
The P2O5 content soluble in mineral acids only must not exceed 2 %.
For this type 1, the test sample for determining solubilities (2) and (3) shall be 1 g.
2 (a)
An NPK fertiliser containing soft ground rock phosphate or partially solubilised rock phosphate must be free from Thomas slag, calcined phosphate and aluminium-calcium phosphate. It shall be declared in accordance with solubilities (1), (3) and (4)
This type of fertiliser must contain:
at least 2 % P2O5 soluble in mineral acids only [solubility (4)];
at least 5 % P2O5 soluble in water and neutral ammonium citrate [solubility (3)];
at least 2,5 % water-soluble P2O5 [solubility (1)].
This type of fertiliser must be marketed under the designation ‘NPK fertiliser containing soft ground rock phosphate’ or ‘NPK fertiliser containing partially solubilised rock phosphate’. For this type 2(a), the test sample for determining solubility (3) shall be 3 g.
(1)
Water-soluble potassium oxide
(2)
The indication ‘low in chloride’ is linked to a maximum content of 2 % Cl
(3)
Chloride content may be declared
Particle size of the basic phosphatic ingredients
Thomas slag
at least 75 % able to pass through a sieve with a mesh of 0,160 mm
Aluminium-calcium phosphate
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
Calcined phosphate
at least 75 % able to pass through a sieve with a mesh of 0,160 mm
Soft ground rock phosphate
at least 90 % able to pass through a sieve with a mesh of 0,063 mm
Partially solubilised rock phosphate
at least 90 % able to pass through a sieve with a mesh of 0,160 mm
2 (b)
An NPK fertiliser containing aluminium-calcium phosphate must be free from Thomas slag, calcined phosphate, soft ground rock phosphate and partially solubilised rock phosphate.
It shall be declared in accordance with solubilities (1) and (7), the latter applying after deduction of the solubility in water.
This type of fertiliser must contain:
at least 2 % of water-soluble P2O5 [solubility (1)];
at least 5 % of P2O5 according to solubility (7).
This type of fertiliser must be marketed under the designation ‘NPK fertiliser containing aluminium-calcium phosphate’.
3.