1 Annex, Commission Implementing Decision (EU) 2019/1713 of 9 October 2019 establishing the forma…

In forcesince 31 Dec 2020

INFORMATION ON MEDIUM COMBUSTION PLANTS COVERED BY DIRECTIVE (EU) 2015/2193

Note. The obligation to supply the information required by January 2021 predates the need for existing Medium Combustion Plants to be permitted or registered. In view of this, when completing the report competent authorities will need to rely on data that they have available at that time. In cases where they do not have data available they shall complete the report using their best estimates. For these reasons a distinction is made between new and existing plants and plants above and below 20MWth.

PART 1

Plant categories

This table provides the plant categories to be used for providing the information required under parts 2 and 3.

For new medium combustion plants, the total rated thermal input may be used.

1.1. New or existing | As defined under Article 3(6) and (7) of Directive (EU) 2015/2193

1.2. Capacity classes (rated thermal input) |

equal to or greater than 1 MWth and less than or equal to 5 MWth

greater than 5 MWth and less than or equal to 20 MWth

greater than 20 MWth

1.3. Plant types |

other than engines and gas turbines

engines

gas turbines

1.4. Fuel types |

solid biomass

other solid fuels

gas oil

liquid fuels other than gas oil

natural gas

gaseous fuels other than natural gas

mixed fuel

PART 2

Metadata

Preferably 2019. If not possible, 2018.

2.1. Country | Identification of the country submitting the report

2.2. Competent Authority | Identification of the competent authority responsible for the report (department, address, phone number and email)

2.3. Number of plants | Number of plants for each plant category

2.4. Reporting year | Calendar year to which the reporting refers

PART 3

Emissions, energy input and capacity

3.1. CO concentrations | Estimated average concentration of carbon monoxide expressed in mg/Nm3 at the reference oxygen level used to express ELVs of the regulated pollutant and dry air for each plant category

3.2. CO emissions | Estimated emissions of carbon monoxide expressed as the total quantity in tonnes per calendar year discharged by plants for each plant category

3.3. Energy input | Estimated total fuel used by the plants expressed in Tera Joules per year for each plant category

3.4. Total aggregated capacity | Estimated total installed capacity expressed as the sum of the rated thermal input of all the plants for each plant category