1 ANNEX, Decision_act (EU) 2026/2015

In forcesince 4 Sep 2026

Annex I to Implementing Decision (EU) 2023/1586 is amended as follows:

(1)

in Part Two, point 2, the following rows are inserted in sequential order:

‘32a. |

EN ISO 3744:2026

Acoustics – Determination of sound power levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2025, including corrected version 2026-01)’;

‘71a. |

EN ISO 13855:2024

Safety of machinery – Positioning of safeguards with respect to the approach of the human body (ISO 13855:2024)’;

‘77a. |

EN ISO 14119:2025

Safety of machinery – Interlocking devices associated with guards – Principles for design and selection (ISO 14119:2024)

EN ISO 14119/A11:2026’;

‘104a. |

EN IEC 62061:2021

Safety of machinery – Functional safety of safety-related control systems

EN IEC 62061:2021/A1:2024’;

(2)

Part Three, point 2, is amended as follows:

(a)

the following rows are inserted in sequential order:

‘1a. |

EN 81-30:2025

Safety rules for the construction and installation of lifts – Lifts for the transport of goods only – Part 30: Electric and hydraulic service lifts’;

‘4b. |

EN 81-42:2025

Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 42: Vertical lifting appliances with enclosed carrier intended for use by persons, including persons with disability’;

‘14a. |

EN 415-4:2025

Safety of packaging machines – Part 4: Palletizers and depalletizers and associated equipment’;

‘102a. |

EN 1175:2025

Safety of industrial trucks – Electrical/electronic requirements’;

‘191a. |

EN ISO 3991:2025

Agricultural machinery – Robotic feed systems – Safety (ISO 3991:2025)’;

‘195a. |

EN ISO 4254-7:2017

Agricultural machinery – Safety – Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017, Corrected version 2019-03)

EN ISO 4254-7/A1:2026’;

‘202a. |

EN ISO 4254-20:2025

Agricultural machinery – Safety – Part 20: Grape, olives and coffee harvesters (ISO 4254-20:2025)’;

‘209a. |

EN ISO 6909:2026

Machine tools – Safety – Press brakes (ISO 6909:2026)’;

‘213a. |

EN ISO 8437-1:2021

Snow throwers – Safety requirements and test procedures – Part 1: Terminology and common tests (ISO 8437-1:2019/Amd 1:2026)

EN ISO 8437-1:2021/A1:2026’;

‘213b. |

EN ISO 8437-2:2021

Snow throwers – Safety requirements and test procedures – Part 2: Pedestrian-controlled snow throwers (ISO 8437-2:2019/Amd 1:2026)

EN ISO 8437-2:2021/A1:2026’;

‘213c. |

EN ISO 8437-3:2021

Snow throwers – Safety requirements and test procedures – Part 3: Ride-on snow throwers (ISO 8437-3:2019/Amd 1:2026)

EN ISO 8437-3:2021/A1:2026’;

‘213d. |

EN ISO 8437-4:2021

Snow throwers – Safety requirements and test procedures – Part 4: Additional national and regional requirements (ISO 8437-4:2019/Amd 1:2026)

EN ISO 8437-4:2021/A1:2026’;

‘215a. |

EN ISO 8528-13:2026

Reciprocating internal combustion engine driven alternating current generating sets – Part 13: Safety (ISO 8528-13:2026)’;

‘223a. |

EN ISO 10218-1:2025

Robotics – Safety requirements – Part 1: Industrial robots (ISO 10218-1:2025)’;

‘224a. |

EN ISO 10218-2:2025

Robotics – Safety requirements – Part 2: Industrial robot applications and robot cells (ISO 10218-2:2025)’;

‘261a. |

EN ISO 11680:2025

Machinery for forestry – Safety requirements and testing for portable pole mounted powered pruners (ISO 11680:2025)’;

‘288a. |

EN 12312-1:2024

Aircraft ground support equipment – Specific requirements – Part 1: Passenger stairs’;

‘348a. |

EN 12693:2026

Refrigerating systems and heat pumps – Safety and environmental requirements – Positive displacement refrigerant compressors’;

‘375a. |

EN 13001-3-5:2025

Cranes – General design – Part 3-5: Limit states and proof of competence of forged and cast hooks’;

‘406a. |

EN 13288:2025

Food processing machinery – Bowl lifting and tilting machines – Safety and hygiene requirements’;

‘516a. |

EN ISO 16089:2025

Machine tools – Safety – Stationary grinding machines (ISO 16089:2025)’;

‘545a. |

EN 16474:2025

Plastics and rubber machines – Tyre curing machines – Safety requirements’;

‘572 – aa. |

EN 17657:2025

Equipments for slaughterhouses – Slaughtering traps for bovine animals – Safety and cleaning requirements’;

‘572c. |

EN 17745:2025

Agricultural and forestry machinery – Environmental requirements for granule applicator of plant protection products’;

‘573b. |

EN 17969:2026

Earth-moving machinery – Safety – Contamination protective systems’;

‘574a. |

EN ISO 18497-1:2024

Agricultural machinery and tractors – Safety of partially automated, semi-autonomous and autonomous machinery – Part 1: Machine design principles and vocabulary (ISO 18497-1:2024)’;

‘574b. |

EN ISO 18497-2:2024

Agricultural machinery and tractors – Safety of partially automated, semi-autonomous and autonomous machinery – Part 2: Design principles for obstacle protection systems (ISO 18497-2:2024)’;

‘574c. |

EN ISO 18497-3:2024

Agricultural machinery and tractors – Safety of partially automated, semi-autonomous and autonomous machinery – Part 3: Autonomous operating zones (ISO 18497-3:2024)’;

‘574d. |

EN ISO 18497-4:2024

Agricultural machinery and tractors – Safety of partially automated, semi-autonomous and autonomous machinery – Part 4: Verification methods and validation principles (ISO 18497-4:2024)’;

‘578a. |

EN ISO 19085-4:2024

Woodworking machines – Safety – Part 4: Vertical panel circular sawing machines (ISO 19085-4:2024)’;

‘579a. |

EN ISO 19085-5:2024

Woodworking machines – Safety – Part 5: Dimension saws (ISO 19085-5:2024)’;

‘580a. |

EN ISO 19085-6:2024

Woodworking machines – Safety – Part 6: Single spindle vertical moulding machines (toupie) (ISO 19085-6:2024)’;

‘581a. |

EN ISO 19085-7:2024

Woodworking machines – Safety – Part 7: Surface planing, thickness planing and combined surface/thickness planing machines (ISO 19085-7:2024)’;

‘582a. |

EN ISO 19085-8:2024

Woodworking machines – Safety – Part 8: Wide belt sanding machines and surface treating machines (ISO 19085-8:2024)’;

‘583a. |

EN ISO 19085-9:2024

Woodworking machines – Safety – Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2024)’;

‘585 – a. |

EN ISO 19085-11:2024

Woodworking machines – Safety – Part 11: Combined machines (ISO 19085-11:2024)’;

‘585b. |

EN ISO 19085-12:2024

Woodworking machines – Safety – Part 12: Tenoning-profiling machines (ISO 19085-12:2024)’;

‘586a. |

EN ISO 19085-13:2025

Woodworking machines – Safety – Part 13: Multi-blade rip sawing machines with manual loading and/or unloading (ISO 19085-13:2025)’;

‘588a. |

EN ISO 19085-15:2025

Woodworking machines – Safety – Part 15: Presses (ISO 19085-15:2025)’;

‘595a. |

EN ISO 19932-1:2025

Equipment for crop protection – Knapsack sprayers – Part 1: Safety and environmental requirements (ISO 19932-1:2025)’;

‘596a. |

EN ISO 19932-2:2025

Equipment for crop protection – Knapsack sprayers – Part 2: Test methods (ISO 19932-2:2025)’;

‘603a. |

EN ISO 23063:2025

Foundry machinery – Safety requirements for high pressure die casting machines (ISO 23063:2024)’;

‘604 – a. |

EN ISO 23779:2025

Shot blasting machinery – Safety and environmental requirements (ISO 23779:2024)’;

‘605a. |

EN ISO 28139:2021

Equipment for crop protection – Knapsack combustion engine-driven airblast sprayers – Safety and environmental requirements and test methods (ISO 28139:2019)

EN ISO 28139:2021/A1:2024’;

‘621a. |

EN 50374:2025

Conductor cars

EN 50374:2025/A1:2025’;

‘631a. |

EN ISO/ASTM 52938-1:2025

Additive manufacturing of metals – Environment, health and safety – Part 1: Safety requirements for PBF-LB machines (ISO/ASTM 52938-1:2025)’;

‘635a. |

EN IEC 60335-2-34:2023

Household and similar electrical appliances – Safety – Part 2-34: Particular requirements for motor-compressors (IEC 60335-2-34:2021)

EN IEC 60335-2-34:2023/A11:2023

EN IEC 60335-2-34:2023/A12:2025’;

‘637a. |

EN 60335-2-38:2003

Household and similar electrical appliances – Safety – Part 2-38: Particular requirements for commercial electric griddles and griddle grills

EN 60335-2-38:2003/AC:2007

EN 60335-2-38:2003/A1:2008

EN 60335-2-38:2003/A2:2024

EN 60335-2-38:2003/A11:2024’;

‘638a. |

EN IEC 60335-2-40:2024

Household and similar electrical appliances – Safety – Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers (IEC 60335-2-40:2022 + COR1:2024)

EN IEC 60335-2-40:2024/A11:2024’;

‘644a. |

EN IEC 60335-2-58:2025

Household and similar electrical appliances – Safety – Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC 60335-2-58:2017)

EN IEC 60335-2-58:2025/A11:2025’;

‘677a. |

EN IEC 62841-2-6:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-6: Particular requirements for hand-held hammers (IEC 62841-2-6:2020)

EN IEC 62841-2-6:2020/A11:2020

EN IEC 62841-2-6:2020/AC:2024-11

EN IEC 62841-2-6:2020/A1:2024

EN IEC 62841-2-6:2020/A12:2024’;

‘677b. |

EN IEC 62841-2-7:2024

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-7: Particular requirements for hand-held spray guns (IEC 62841-2-7:2024)

EN IEC 62841-2-7:2024/A11:2024

EN IEC 62841-2-7:2024/AC:2025-07’;

‘681b. |

EN 62841-2-11:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, modified)

EN 62841-2-11:2016/A1:2020

EN 62841-2-11:2016/A11:2024’;

‘681c. |

EN IEC 62841-2-12:2024

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-12: Particular requirements for hand-held concrete vibrators (IEC 62841-2-12:2024)

EN IEC 62841-2-12:2024/A11:2024

EN IEC 62841-2-12:2024/AC:2025-11’;

‘683a. |

EN IEC 62841-2-18:2026

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-18: Particular requirements for hand-held strapping tools (IEC 62841-2-18:2024 + COR1:2025)

EN IEC 62841-2-18:2026/A11:2026’;

‘683b. |

EN IEC 62841-2-19:2025

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-19: Particular requirements for hand-held jointers (IEC 62841-2-19:2024)

EN IEC 62841-2-19:2025/A11:2025’;

‘683c. |

EN IEC 62841-2-20:2025

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-20: Particular requirements for hand-held band saws (IEC 62841-2-20:2024)

EN IEC 62841-2-20:2025/A11:2025’;

‘684a. |

EN IEC 62841-2-22:2025

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-22: Particular requirements for hand-held cut-off machines (IEC 62841-2-22:2025)

EN IEC 62841-2-22:2025/A11:2025’;

‘684b. |

EN IEC 62841-2-23:2026

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-23: Particular requirements for hand-held die grinders and small rotary tools (IEC 62841-2-23:2024)

EN IEC 62841-2-23:2026/A11:2026’;

‘694a. |

EN IEC 62841-3-16:2026

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-16: Particular requirements for transportable belt sanders, disc sanders and belt/disc sanders (IEC 62841-3-16:2025)

EN IEC 62841-3-16:2026/A11:2026’;

‘697a. |

EN IEC 62841-4-4:2026

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws (IEC 62841-4-4:2020)

EN IEC 62841-4-4:2026/A1:2026

EN IEC 62841-4-4:2026/A11:2026’;

‘698a. |

EN IEC 62841-4-6:2024

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums (IEC 62841-4-6:2022)

EN IEC 62841-4-6:2024/A11:2024

EN IEC 62841-4-6:2024/AC:2026-06’;

‘699a. |

EN IEC 62841-4-8:2025

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-8: Particular requirements for shredders/chippers

EN IEC 62841-4-8:2025/A11:2025’;

(b)

rows 401a and 457a are replaced by the following:

‘401a. |

EN 13155:2020+A1:2025

Crane – Safety – Non-fixed load lifting attachments

EN 13155:2020+A1:2025/AC:2026’;

‘457a. |

EN 14439:2025

Cranes – Tower cranes

EN 14439:2025/AC:2026’.