1 ANNEX, Decision_act (EU) 2026/803

In forcesince 10 Apr 2026

Annex I to Implementing Decision (EU) 2023/2584 is amended as follows:

(1)

rows 2, 3, 10, 11, 12, 13, 14, 15, 16, 17, 22, 23, 25, 54 and 62 are deleted;

(2)

the following row 16a is inserted:

‘16a. |

EN 13261:2024

Railway applications – Wheelsets and bogies – Axles – Product requirements

Restriction: Concerning Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the “rolling stock – locomotives and passenger rolling stock” subsystem of the rail system in the European Union, the standard provides presumption of conformity only to point 4.2.3.5.2.1(2) of its Annex. Concerning Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem “rolling stock – freight wagons” of the rail system in the European Union and repealing Decision 2006/861/EC, the standard provides presumption of conformity only to the two first paragraphs of point 4.2.3.6.4 of its Annex. The requirement on traceability of axles is not tackled in the standard.’

(3)

row 68 is deleted;

(4)

the following row 68a is inserted:

‘68a. |

EN 16494:2025

Railway applications – Requirements for ERTMS Trackside Boards’

(5)

row 69 is deleted;

(6)

the following row 69a is inserted:

‘69a. |

EN 16584-1:2025

Railway applications – Design for PRM use – General requirements – Part 1: Contrast

Restriction: Concerning Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility, the standard does not provide presumption of conformity to point 4.2.1.15(3) of its Annex. For points 5.3.2.8(4), 5.3.2.9(5) and 5.3.2.10(2) the standard provides presumption of conformity only to slip resistance.’

(7)

row 71 is deleted;

(8)

the following row 71a is inserted:

‘71a. |

EN 16584-3:2025

Railway applications – Design for PRM use – General requirements – Part 3: Optical and friction characteristics

Restriction: Concerning Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility, the standard does not provide presumption of conformity to point 4.2.12(1) of its Annex as it is a definition.’

(9)

row 72 is deleted;

(10)

the following row 72a is inserted:

‘72a. |

EN 16585-1:2025

Railway applications – Design for PRM use – Equipment and components onboard rolling stock – Part 1: Toilets’

(11)

row 73 is deleted;

(12)

the following row 73a is inserted:

‘73a. |

EN 16585-2:2025

Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 2: Elements for sitting, standing and moving

Restriction: Concerning Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility, the standard does not provide full presumption of conformity to point 4.2.2.1.2.1(2) of its Annex: the item regarding the unit intended to be operated exclusively within a seat reservation system is not tackled by the standard.

Note: There is an erratum in the standard: clause 5.4(a) shall be 5.4(1) and the subclauses should be renumbered accordingly.’

(13)

row 74 is deleted;

(14)

the following row 74a is inserted:

‘74a. |

EN 16585-3:2025

Railway applications – Design for PRM use – Equipment and components on board rolling stock – Part 3: Clearways and internal doors’

(15)

row 75 is deleted;

(16)

the following row 75a is inserted:

‘75a. |

EN 16586-1:2025

Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 1: Steps for access and egress

Restriction: Concerning Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility, the standard does not provide presumption of conformity to point 4.2.2.1.2(4) of its Annex as Annex B of the standard does not provide enough content for that.’

(17)

row 76 is deleted;

(18)

the following row 76a is inserted:

‘76a. |

EN 16586-2:2025

Railway applications – Design for PRM use – Accessibility of persons with reduced mobility to rolling stock – Part 2: Boarding aids

Restriction: Concerning Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union’s rail system for persons with disabilities and persons with reduced mobility, the standard does not provide presumption of conformity to 4.2.2.12.2(4) of its Annex: Clause 5.5 of the standard introduces a deviation not allowed by this Commission Regulation, only automatic bridging plates are allowed (point 4.2.2.12.1(2) of the Annex). Also, presumption of conformity to point 4.2.2.12.3(1) cannot be provided by the standard as it is a definition.’

(19)

rows 98 and 99 are replaced by the following:

‘98. |

EN 50126-1:2017

Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 1: Generic RAMS Process

EN 50126-1:2017/A1:2024

99.

|

EN 50126-2:2017

Railway Applications – The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) – Part 2: Systems Approach to Safety

EN 50126-2:2017/A1:2024’

(20)

the following row 102a is inserted:

‘102a. |

EN 50388-2:2025

Fixed installations and rolling stock for railway applications – Technical criteria for the coordination between electric traction power supply systems and rolling stock to achieve interoperability – Part 2: Stability and harmonics’

(21)

the following row 114b is inserted:

‘114b. |

EN 50728:2024

Railway applications – Rolling stock – Testing for electromagnetic compatibility with track circuits’