Following Belgium’s request for a derogation for the tugboat HAVENSLEEPBOOT 21, registered in Belgium under the unique European vessel identification number 06503824, from Annexes II and V of Directive (EU) 2016/1629, the technical documentation prepared by Lloyd’s Register and submitted by Belgium was examined and revised by the Working Group on Technical Requirements of the European Committee for Drawing up Standards in the Field of Inland Navigation (CESNI). The assessment, set out in document CESNI/PT (20) 21 rev. 3, concluded that the operation, bunkering and maintenance of the dual-fuel system can be carried out safely, taking into account the planned measures and procedures described in the technical documentation.
Based on this assessment, the use of methanol as a fuel is therefore deemed to be adequately safe, provided that the following conditions are met at all times:
The retrofitting of the propulsion system requires the modification or addition of the following systems and components: a methanol tank, a bunkering station, an inert gas system, a pump room, the propulsion engines and the ventilation system.
A risk assessment in accordance with Annex 8 of the ES-TRIN is available for the vessel (version Lloyd’s Register of 6 February 2020) – Annex 1 of CESNI/PT (20) 21 rev. 3.
The additional and different construction and equipment requirements have been satisfied on the vessel as per:
the safety concept (revised version of 1 December 2020) – Annex 2 of CESNI/PT (20) 21 rev. 3;
the ventilation system – Annex 6 of CESNI/PT (20) 21 rev. 3:
Note 1 (revised version of 12 June 2020),
Note 2 (revised version of 29 July 2020);
the hazardous areas – Annex 7 of CESNI/PT (20) 21 rev. 3:
general hazardous areas (version of 12 February 2020),
hazardous areas breather pipe (min.) DN50 (revised version of 29 July 2020),
hazardous areas breather pipe (max.) DN90 (version of 29 July 2020),
hazardous areas breather pipe DN150 (version of 12 June 2020);
arising from Chapter 30 and Annex 8 of the ES-TRIN and the risk assessment.
Methanol bunkering must comply with the procedures as laid down in the bunkering procedure (version of 13 Febraury 2020) – Annex 3 of of CESNI/PT (20) 21 rev. 3.
The propulsion system must be serviced in compliance with the manufacturer’s instructions, possibly Anglo Belgian Corporation nv. The instructions are to be retained on board.
All crew members are to be instructed in the dangers, use, servicing and inspection of the dual-fuel propulsion system in accordance with the content specified in the technical documentation concerning training of the crew and staff members (version of 13 February 2020) – Annex 4 of CESNI/PT (20) 21 rev. 3.
All the data on the use of the dual-fuel propulsion system is to be recorded by the operator and retained for not less than five years. The data is to be sent to the competent authority upon request.
An annual evaluation report containing all the captured data will be sent to the CESNI Secretariat for distribution to Member States. The evaluation report is to contain at least the following information:
System failure;
Leakage;
Bunker data (methanol);
Nonconformities, repairs and modifications of the dual-fuel propulsion system;
Operating data;
Emissions report based on the Dutch standard reference methods (SRM) or PEMS measurements as per the Prominent Study ‘D3.3, M12, Assessment of options for monitoring and enforcement’ dated 3 October 2016. Formaldehyde emissions need to be additionally covered in line with recognised methodologies.
The vessel complies with project description, plans and diagram – Annex 5 of CESNI/PT (20) 21 rev. 3:
Project description (version of 22 April 2020);
General layout (revised version of 6 August 2020);
Tank system (version of 12 February 2020);
PID diagram (version of 11 February 2020).
The pilot takes into account the gap analysis of ES-TRIN Chapter 30 and Annex 8 (version of 1 December 2020) – Annex 8 of CESNI/PT (20) 21 rev. 3.