Art. 1 Regulation (EU) 2025/2547

Definitions

In forcesince 10 Dec 2025cited 1×

For the purposes of this Regulation, the definitions laid down in Article 1 of Commission Implementing Regulation (EU) 2025/2546 [Commission Implementing Regulation (EU) 2025/2546 of 10 December 2025 on the application of the principles for verification of declared embedded emissions pursuant to Regulation (EU) 2023/956 of the European Parliament and of the Council (OJ L, 2025/2546, 22.12.2025, ELI: http://data.europa.eu/eli/reg_impl/2025/2546/oj).] and Article 1 of Commission Delegated Regulation (EU) 2025/2551 [Commission Delegated Regulation (EU) 2025/2551 of 20 November 2025 supplementing Regulation (EU) 2023/956 of the European Parliament and of the Council by specifying the conditions for granting accreditation to verifiers, for the control and oversight of accredited verifiers, for the withdrawal of accreditation and for mutual recognition and peer evaluation of accreditation bodies (OJ L, 2025/2551, 22.12.2025, ELI: http://data.europa.eu/eli/reg_del/2025/2551/oj).] apply.

The following definitions also apply:

(1)

‘functional unit’ means the reference unit used for the calculation of embedded emissions in goods;

(2)

‘activity level’ means the quantity of goods to which the same functional unit applies that are produced within the system boundaries of a production process during a reporting period;

(3)

‘system boundary’ means the group of chemical or physical processes included in the calculation of embedded emissions of goods under the same aggregated goods category;

(4)

‘aggregated goods categories’ means aggregated goods categories pursuant to Table 1 of point 2 of Annex I;

(5)

‘reporting period’ means the period corresponding to the calendar year during which the good was produced and used by the authorised CBAM declarant as reference for the determination of embedded emissions;

(6)

‘production route’ means a specific technology used in a production process to produce goods;

(7)

‘precursor’ means any input material into a production process included in the list of goods set out in Annex I to Regulation (EU) 2023/956;

(8)

‘source stream’ means either of the following:

(a)

a specific fuel type, raw material or product giving rise to emissions of relevant greenhouse gases at one or more emission sources as a result of its consumption or production;

(b)

a specific fuel type, raw material or product containing carbon and included in the calculation of greenhouse gas emissions using a mass balance method;

(9)

‘emission source’ means a separately identifiable part of an installation or a process within an installation, from which relevant greenhouse gases are emitted;

(10)

‘calculation factors’ means net calorific value, emission factor, preliminary emission factor, oxidation factor, conversion factor, carbon content or biomass fraction;

(11)

‘measurement system’ means a complete set of measuring instruments and other equipment used to determine variables for the monitoring and calculation of emissions;

(12)

‘activity data’ means the amount of fuels or materials consumed or produced by a process relevant for the calculation-based methodology, expressed in terajoules, mass in tonnes or, for gases, volume in normal cubic metres, as appropriate.

  • Regulation (EU) 2025/25461Law

    … акредитация (OВ L, 2025/2551, 22.12.2025 г., ELI: http://data.europa.eu/eli/reg_del/2025/2551/oj).] и в член 1 от Регламент за изпълнение (ЕС) 2025/2547 на Комисията …