Annexes I and II to Regulation (EU) 2019/2144 are amended as follows:
Annex I is amended as follows:
the row for UN Regulation Number 25 is replaced by the following:
‘25 | Head restraints (headrests), whether or not incorporated in vehicle seats | Supplement 1 to the 04 series of amendments | OJ L 258, 7.8.2020, p. 30, ELI: http://data.europa.eu/eli/reg/2020/1169/oj | M, N’
the row for UN Regulation Number 34 is replaced by the following:
‘34 | Prevention of fire risks (liquid fuel tanks) | 04 series of amendments | OJ L, 2025/1454, 29.7.2025, ELI: http://data.europa.eu/eli/reg/2025/1454/oj | M, N, O’
the row for UN Regulation Number 79 is replaced by the following:
‘79 | Steering equipment | 04 series of amendments | OJ L, 2025/3, 10.1.2025, ELI: http://data.europa.eu/eli/reg/2025/3/oj | M, N, O’
the row for UN Regulation Number 100 is replaced by the following:
‘100 | Electric safety | 03 series of amendments | OJ L, 2024/1955, 26.7.2024, ELI: http://data.europa.eu/eli/reg/2024/1955/oj | M, N’
the row for UN Regulation Number 117 is replaced by the following:
‘117 | Tyres with regard to rolling sound emissions, adhesion on wet surfaces and rolling resistance (Classes C1, C2 and C3) | 04 series of amendments | OJ L, 2025/1453, 7.8.2025, ELI: http://data.europa.eu/eli/reg/2025/1453/oj | M, N, O’
the row for UN Regulation Number 127 is replaced by the following:
‘127 | Pedestrian safety | 04 series of amendments | OJ L, 2025/460, 17.3.2025, ELI: http://data.europa.eu/eli/reg/2025/460/oj | M1, N1’
the row for UN Regulation Number 152 is replaced by the following:
‘152 | Advanced Emergency Braking Systems (AEBS) | 02 series of amendments | OJ L, 2024/2497, 27.9.2024, ELI: http://data.europa.eu/eli/reg/2024/2497/oj | M1, N1’
the following rows for UN Regulation Numbers 167, 169 and 171 are added:
‘167 | Heavy-duty vehicles direct vision | Original version of the Regulation | OJ L, 2024/1065, 17.5.2024, ELI: http://data.europa.eu/eli/reg/2024/1065/oj | M2, M3, N2, N3
169 | Event Data Recorder for HDVs | Original version of the Regulation | OJ L, 2024/1218, 23.5.2024, ELI: http://data.europa.eu/eli/reg/2024/1218/oj | M2, M3, N2, N3
171 | Driver Control Assistance Systems (DCAS) | Original version of the Regulation | OJ L, 2024/2689, 4.11.2024, ELI: http://data.europa.eu/eli/reg/2024/2689/oj | M, N’
Annex II is amended as follows:
the row for requirement B2 is replaced by the following:
[In application of the transitional provisions of 04 series of amendments to UN Regulation No 127, type approvals issued using the specific provisions related to WAD 2100 boundary on the bonnet top shall continue to be accepted until 1 September 2029. Type approvals issued using the specific provisions of the rear physical edge of the bonnet instead of the BRRL shall continue to be accepted until 1 September 2031.’;]
‘B2 Enlarged head impact zone | UN Regulation No 127 | Headform contact with A-pillars, windscreen header and cowl is excluded, but shall be monitored. | C | | | C | | | | | | | |
the row for requirement B9 is replaced by the following:
‘B9 Heavy-duty vehicles direct vision | UN Regulation No 167 | | | D | D | | D | D’ | | | | | |
the row for requirement C10 is replaced by the following:
[In application of the transitional provisions of 04 series of amendments to UN Regulation No 117, new tyres approved in accordance with the requirements of 02 or 03 series of amendments to that UN Regulation and manufactured before 7 July 2026, may continue to be fitted on vehicles in use until 6 January 2029.’;]
‘C10 Tyre safety and environmental performance |
UN Regulation No 30
UN Regulation No 54
UN Regulation No 117
A test procedure for worn tyres shall also be ensured; the dates in note C apply. | X | X | X | X | X | X | X | X | X | X | | A
the rows for requirements E6 and E7 are replaced by the following:
[Commission Implementing Regulation (EU) 2022/1426 of 5 August 2022 laying down rules for the application of Regulation (EU) 2019/2144 of the European Parliament and of the Council as regards uniform procedures and technical specifications for the type-approval of the automated driving system (ADS) of fully automated vehicles (OJ L 221, 26.8.2022, p. 1, ELI: http://data.europa.eu/eli/reg_impl/2022/1426/oj).’;]
‘E6 Systems to replace driver’s control |
UN Regulation No 157
Commission Implementing Regulation (EU) 2022/1426 (for fully automated vehicles)
B (5) | B (5) | B (5) | B (5) | B (5) | B (5) | | | | | |
E7 Systems to provide the vehicle with information on state of vehicle and surrounding area |
UN Regulation No 157
Implementing Regulation (EU) 2022/1426 (for fully automated vehicles)
B (5) | B (5) | B (5) | B (5) | B (5) | B (5) | | | | | |
in section E ‘Driver and System Behaviour’, the following rows for requirements E10 and E11 are added:
‘E10 Systems to assist the driver in performing vehicle dynamic control | UN Regulation No 171 | | IF | IF | IF | IF | IF | IF | | | | | |
E11 Automated valet parking | Implementing Regulation (EU) 2022/1426, Annex V | | IF | IF | IF | IF | IF | IF’ | | | | | |
footnote (5) is replaced as follows:
‘(5) Compliance is required in case of automated / fully automated vehicles.’;
the following note is added to the Notes to the table:
‘IF: Compliance is required if fitted.’.