Recital 146, Directive (EU) 2023/1791

In forcesince 13 Sep 2023

Reflecting technological progress and the growing share of renewable energy sources in the electricity generation sector, the default coefficient for savings in kWh electricity should be reviewed in order to reflect changes in the primary energy factor for electricity and other energy carriers. The calculation methodology is in accordance with the Eurostat energy balances and definitions, except for the allocation method of fuel input for heat and electricity in combined heat and power plants, for which the efficiency of the reference system, required for the allocation of fuel consumption, was aligned with Eurostat data for 2015 and 2020. Calculations reflecting the energy mix of the primary energy factor for electricity are based on annual average values. The ‘physical energy content’ accounting method is used for nuclear electricity and heat generation and the ‘technical conversion efficiency’ method is used for electricity and heat generation from fossil fuels and biomass. For non-combustible renewable energy, the method is the direct equivalent based on the ‘total primary energy’ approach. To calculate the primary energy share for electricity in cogeneration, the method set out in this Directive is applied. An average rather than a marginal market position is used. Conversion efficiencies are assumed to be 100 % for non-combustible renewables, 10 % for geothermal power stations and 33 % for nuclear power stations. The calculation of total efficiency for cogeneration is based on the most recent data from Eurostat. The conversion, transmission and distribution losses are taken into account. Distribution losses for energy carriers other than electricity are not considered in the calculations, due to the lack of reliable data and the complexity of the calculation. As for system boundaries, the primary energy factor is 1 for all energy sources. The selected coefficient for the primary energy factor for electricity is the average of 2024 and 2025 values, since a forward-looking primary energy factor will provide a more appropriate indicator than a historical one. The analysis covers the Member States and Norway. The dataset for Norway is based on the ENTSO-E data.