SOPUROXID
Product type(s)
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT03: Veterinary hygiene
PT04: Food and feed area
Authorisation number: EU-0026179-0000
R4BP asset number: EU-0026179-0000
Name | SOPUROXID
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT03: Veterinary hygiene
PT04: Food and feed area
Name and address of the authorisation holder | Name | SOPURA
Address | Parc paysager de Tyberchamps 14 7180 SENEFFE Belgium
Authorisation number | | EU-0026179-0000
R4BP asset number | | EU-0026179-0000
Date of the authorisation | | 12 July 2022
Expiry date of the authorisation | | 30 June 2032
Name of manufacturer | SOPURA N.V.
Address of manufacturer | Rue de Trazegnies 199 6180 COURCELLES Belgium
Location of manufacturing sites | SOPURA N.V. site 1 Rue de Trazegnies 199 6180 COURCELLES Belgium
Name of manufacturer | SOPURA QUIMICA
Address of manufacturer | Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain
Location of manufacturing sites | SOPURA QUIMICA site 1 Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain
Name of manufacturer | HYPRED SAS (KERSIA Group)
Address of manufacturer | 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France
Location of manufacturing sites |
HYPRED SAS (KERSIA Group) site 1 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France
HYPRED SAS (KERSIA Group) site 2 Niepruszewo, ul. Kasztanowa 64-320 Buk Poland
Active substance | Peracetic acid
Name of manufacturer | SOPURA N.V.
Address of manufacturer | Rue de Trazegnies 199 6180 COURCELLES Belgium
Location of manufacturing sites | SOPURA N.V. site 1 Rue de Trazegnies 199 6180 COURCELLES Belgium
Active substance | Peracetic acid
Name of manufacturer | SOPURA QUIMICA
Address of manufacturer | Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain
Location of manufacturing sites | SOPURA QUIMICA site 1 Poligon ‘La Canaleta’, Avinguda Júpiter 7 25300 TARREGA Spain
Active substance | Peracetic acid
Name of manufacturer | HYPRED SAS (KERSIA Group)
Address of manufacturer | 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France
Location of manufacturing sites |
HYPRED SAS (KERSIA Group) site 1 55, Boulevard Jules Verger (BP 10180) 35803 DINARD France
HYPRED SAS (KERSIA Group) site 2 Niepruszewo, ul. Kasztanowa 64-320 Buk Poland
Common name | IUPAC name | Function | CAS number | EC number | Content (%)
Peracetic acid | | Active substance | 79-21-0 | 201-186-8 | 3,2-15 % (w/w)
Hydrogen peroxide | | Non-active substance | 7722-84-1 | 231-765-0 | 16,5-23,5 % (w/w)
Acetic acid | | Non-active substance | 64-19-7 | 200-580-7 | 5,5-16,7 % (w/w)
Sulfuric acid | | Non-active substance | 7664-93-9 | 231-639-5 | 0,2-24,04 % (w/w)
Formulation type(s) | SL Soluble concentrate
Identifier | Meta SPC: Meta SPC1
Number | 1-1
Product type(s) |
PT02: Disinfectants and algaecides not intended for direct application to humans or animals
PT03: Veterinary hygiene
PT04: Food and feed area
Common name | IUPAC name | Function | CAS number | EC number | Content (%)
Peracetic acid | | Active substance | 79-21-0 | 201-186-8 | 5-5 % (w/w)
Hydrogen peroxide | | Non-active substance | 7722-84-1 | 231-765-0 | 16,5-22 % (w/w)
Acetic acid | | Non-active substance | 64-19-7 | 200-580-7 | 5,5-9,55 % (w/w)
Sulfuric acid | | Non-active substance | 7664-93-9 | 231-639-5 | 0,2-24,04 % (w/w)
Formulation type(s) | SL Soluble concentrate
Hazard statements |
H272: May intensify fire; oxidiser.
H290: May be corrosive to metals.
H302+H312+H332: Harmful if swallowed, in contact with skin or if inhaled.
H314: Causes severe skin burns and eye damage.
H318: Causes serious eye damage.
H335: May cause respiratory irritation.
H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements |
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280: Wear protective gloves.
P280: Wear eye protection.
P280: Wear face protection.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310: Immediately call a POISON CENTER/doctor.
P221: Take any precaution to avoid mixing with combustibles.
P261: Avoid breathing vapours.
P264: Wash hands thoroughly after handling.
P270: Do not eat, drink or smoke when using this product.
P271: Use only outdoors or in a well-ventilated area.
P321: Specific treatment (see information on this label).
P330: Rinse mouth.
P363: Wash contaminated clothing before reuse.
P301+P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P301+P330+P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting.
P302+P352: IF ON SKIN: Wash with plenty of water.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P361+P364: Take off immediately all contaminated clothing and wash it before reuse.
P405: Store locked up.
P403+P233: Store in a well-ventilated place. Keep container tightly closed.
P501: Dispose of contents to in accordance with local/regional/national/international regulations.
P280: Wear protective clothing.
P501: Dispose of container to in accordance with local/regional/national/international regulations.
P235: Keep cool.
P273: Avoid release to the environment.
P391: Collect spillage.
P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P261: Avoid breathing spray.
P260: Do not breathe spray.
P260: Do not breathe vapours.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: No data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In Industrial, public and non-medical healthcare areas:
Disinfection of hard/non-porous surfaces by manual treatment (mopping) with prior cleaning
Application method(s) |
Method: Manual treatment (mopping).
Detailed description:
Diluted product is applied by mopping with the appropriate tool (e.g. flat mop or cleaning cloths). After application, the diluted product is drained.
Application rate(s) and frequency |
Application Rate: Against bacteria and yeasts: Non-medical healthcare areas With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) at Room Temperature in 5 min contact time. Application rate: 20 ml/m2 Use other than in HEALTHCARE With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time, efficient use temperature from + 4 °C up to Room Temperature. Application rate: 30 ml/m2
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
Items to be disinfected by mopping have to stay sufficiently wet during the required contact time to allow optimal disinfection.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing and loading.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 20 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Re-entry is only permitted once the air concentrations of peracetic acid and hydrogen peroxide have dropped below the respective reference values (AEC). After the application, the room must be ventilated, preferably by mechanical ventilation. The duration of the ventilation period has to be established by measurement with suitable measurement equipment (specified by the authorization holder).
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In Industrial, public and and non-medical healthcare areas:
Disinfection of hard/non-porous surfaces by manual treatment (spraying) with prior cleaning
Application method(s) |
Method: Manual treatment (spraying)
Detailed description:
Diluted product is applied by spraying using a small spraying can
Application rate(s) and frequency |
Application Rate: Against bacteria and yeasts: Non-medical healthcare areas: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) at Room Temperature in 5 min contact time. Application rate: 20 ml/m2. Use other than in HEALTHCARE With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 15 min contact time, efficient use temperature from + 4° C up to Room Temperature. Application rate: 30 ml/m2.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 4 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In pharmaceutical and cosmetic industry:
Disinfection of hard/non-porous surfaces by CIP procedures (with circulation) with prior cleaning
Application method(s) |
Method: By CIP procedure
Detailed description:
Diluted product does automatically circulate from the CIP holding tanks through closed pipework and installations. After the disinfection procedure, the vessels (pipework and tanks) are drained and rinsed with water under closed system conditions.
Application rate(s) and frequency |
Application Rate: Against bacteria and yeasts: With 0,032 % PAA (Dilution of the product at 0,64 % i.e. 640 ml/100 l) in 15 min contact time, efficient use temperature from + 4 °C up to Room Temperature.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 4 is mandatory during mixing and loading.
Rinse the pump and disconnect it from the installation before maintenance.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In greenhouses:
Disinfection of hard/non-porous surfaces by spraying
Application method(s) |
Method: open system: spray treatment
Detailed description:
Diluted product is automatically applied in all directions via a spraying device The user is present, seated in a personal enclosure/in a closed cabin (ex. tractor equipped with a spraying/foaming device)
Application rate(s) and frequency |
Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing & loading phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading and application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
The application should only take place with the user in a personal enclosure and no other person is present.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In greenhouses:
Disinfection of hard/non-porous surfaces by spraying
Application method(s) |
Method: open system: spray treatment
Detailed description:
Diluted product is automatically applied in all directions via a spraying device.
Application rate(s) and frequency |
Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 40 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
Re-entry of the general public only when surfaces are dried and after sufficient ventilation.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In agriculture/horticulture areas:
Disinfection of hard/non-porous surfaces/equipment (small parts such as equipment, spare parts, tools, valves, hoses, …) by immersion in soaking baths with prior cleaning.
Application method(s) |
Method: open system: immersion
Detailed description:
The concentrated product is pumped in a soaking bath and diluted to the desired use concentration, before immersion of items to be disinfected
Application rate(s) and frequency |
Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the application phase.
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during the post-application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | —
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In agriculture/horticulture areas:
Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning
Application method(s) |
Method: open system: spray treatment
Detailed description:
The diluted product is manually sprayed on the surfaces/equipment using spraying equipment. Spraying is only applied downwards and in a horizontal direction.
Application rate(s) and frequency |
Application Rate: Between 20 and 200 ml/m2 Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time.
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection:
Use of respiratory protective equipment (RPE) providing a protection factor of 10 is mandatory during mixing and loading.
Use of respiratory protective equipment (RPE) providing a protection factor of 20 is mandatory during the application phase.
When the product is being used in areas accessible to the public, mark treated areas during the treatment period and indicate possible risks for humans and non-target organisms (e.g. primary and secondary poisoning) as well as first measures to be taken in case of poisoning.
Rinse the pump and disconnect it from the installation before maintenance.
The treated surface should not be allowed to dry prior to rinsing.
See general directions for use.
See general directions for use.
See general directions for use.
Product type | PT02: Disinfectants and algaecides not intended for direct application to humans or animals
Where relevant, an exact description of the authorised use | Not relevant
Target organism(s) (including development stage) |
Scientific name: no data
Common name: Bacteria
Development stage: no data
Scientific name: no data
Common name: Yeasts
Development stage: no data
Field(s) of use |
Indoor use
In agriculture/horticulture areas:
Disinfection of hard/non-porous surfaces/equipment by spraying with prior cleaning
Application method(s) |
Method: spraying
Detailed description:
Diluted product is applied by spraying in an automated way Spraying is only applied downwards and in a horizontal direction.
Application rate(s) and frequency |
Application Rate: Against bacteria and yeasts: With 0,048 % PAA (Dilution of the product at 0,96 % i.e. 960 ml/100 l) in 60 min contact time
Number and timing of application:
/
Category(ies) of users |
Industrial
Professional
Pack sizes and packaging material |
HDPE with screw and venting caps (weight depends on density of product):
Jerry cans (10 to 25 kg), Drums (200 to 250 kg), IBC (1000 to 1200 kg), 1 l bottles, bulk delivery.
See general directions for use.
Dermal protection:
Use appropriate safety glasses and/or face shield during the mixing, loading & application phase.
Respiratory protection: